How to Fix CVE-2014-0196: Concurrent Execution using Shared Resource with Improper Synchronization ('Race

Related fixes

Other vulnerabilities in the same area that are worth patching alongside this one:

• How to Fix CVE-2026-8632: Command Injection in HP Linux Imaging and Printing Software — Command Injection in HP Linux Imaging and Printing Software
• How to Fix CVE-2026-23213: Critical Vulnerability in Linux — Critical Vulnerability in Linux
• How to Fix CVE-2026-43157: Security Vulnerability in Linux , Security Vulnerability in Linux
• How to Fix CVE-2026-23009: Critical Vulnerability in Linux , Critical Vulnerability in Linux
• How to Fix CVE-2026-43151: Security Vulnerability in Linux , Security Vulnerability in Linux

*By Sai Kiran Pandrala*

Patch immediately. CISA's Known Exploited Vulnerabilities catalog lists this CVE, which means active exploitation has been confirmed. CISA KEV entry added 2023-05-12, federal due date 2023-06-02.

What is CVE-2014-0196?

CVE-2014-0196 is a concurrent execution using shared resource with improper synchronization ('race in Kernel from Linux. The n_tty_write function in drivers/tty/n_tty.c in the Linux kernel through 3.14.3 does not properly manage tty driver access in the "LECHO & !OPOST" case, which allows local users to cause a denial of service (memory corruption and system crash) or gain privileges by triggering a race condition involving read and write operations with long strings.

Why this CVE matters

This CVE sits on CISA's Known Exploited Vulnerabilities catalog, which only happens after active exploitation is observed in the wild. The concurrent execution using shared resource with improper synchronization ('race class of flaw gives attackers a reliable foothold against vulnerable instances of Kernel. If your deployment matches the affected versions, treat any window of unpatched exposure as compromise-likely and review logs accordingly.

Am I affected?

Run the version check that matches your platform. If the installed build sits inside the affected range from the table above, the fix applies to you.

# Linux package check
dpkg -s linux-image-generic 2>/dev/null | grep -i version    # Debian / Ubuntu
rpm -q linux-image-generic 2>/dev/null                       # RHEL / Rocky

How to fix CVE-2014-0196

Apply the patched build the vendor names in the advisory. The commands below are starting points keyed to common platforms - adapt the package name and target version to your environment.

Ubuntu / Debian

sudo apt-get update
sudo apt-get install --only-upgrade linux-image-generic
# verify the package version matches the fixed release in the advisory
dpkg -s linux-image-generic | grep -i version

RHEL / CentOS / Rocky / AlmaLinux

sudo dnf upgrade --refresh linux-image-generic -y
rpm -q linux-image-generic

Container image

# Vendor advisory: http://www.ubuntu.com/usn/USN-2203-1
# Pull the patched base image and rebuild
docker pull <your-registry>/linux-image-generic:<patched-tag>
docker build -t <your-app>:patched .
docker stop <your-app> && docker rm <your-app>
docker run -d --name <your-app> <your-app>:patched

PowerShell detect/upgrade/verify/log (Windows)

# CVE-2014-0196 remediation runner — adapt the version checks to your environment.
$log = "C:\Logs\CVE-2014-0196-fix.log"
New-Item -ItemType Directory -Force -Path (Split-Path $log) | Out-Null
function Write-Log($msg) { "$(Get-Date -Format s) $msg" | Out-File $log -Append }

try {
    Write-Log "Detect: checking installed product"
    $installed = Get-CimInstance Win32_Product -ErrorAction SilentlyContinue |
        Where-Object { $_.Name -match 'product' }
    if (-not $installed) { Write-Log "Product not installed; nothing to do"; return }
    Write-Log "Found version $($installed.Version)"

    Write-Log "Backup: copying program files and registry hive"
    $stamp = Get-Date -Format yyyyMMdd-HHmm
    $backup = "C:\Backup\CVE-2014-0196-$stamp"
    New-Item -ItemType Directory -Force -Path $backup | Out-Null
    Copy-Item $installed.InstallLocation $backup -Recurse -ErrorAction SilentlyContinue
    reg export HKLM\Software\Microsoft\Windows\CurrentVersion\Uninstall "$backup\uninstall.reg" /y | Out-Null

    Write-Log "Upgrade: install patched build via vendor MSI / Windows Update"
    # Example MSI:  Start-Process msiexec.exe -ArgumentList '/i C:\Patches\product-patched.msi /qn /norestart' -Wait
    Install-WindowsUpdate -AcceptAll -AutoReboot -ErrorAction SilentlyContinue

    Write-Log "Verify: re-reading product version"
    $after = Get-CimInstance Win32_Product | Where-Object { $_.Name -match 'product' }
    Write-Log "Post-patch version: $($after.Version)"
    if ($after.Version -ne $installed.Version) { Write-Log "SUCCESS: version changed" } else { Write-Log "WARN: version unchanged - check vendor advisory" }
} catch {
    Write-Log "ERROR: $_"
    throw
}

Bash detect/upgrade/verify/log (Linux)

#!/usr/bin/env bash
# CVE-2014-0196 remediation runner. Re-runnable, exits non-zero on failure.
set -euo pipefail
log() { printf '%s %s\n' "$(date -Is)" "$*" | tee -a /var/log/cve-2014-0196-fix.log; }

log "Detect: current linux-image-generic version"
if command -v dpkg >/dev/null 2>&1; then
    current=$(dpkg-query -W -f='${Version}' linux-image-generic 2>/dev/null || echo "not-installed")
elif command -v rpm >/dev/null 2>&1; then
    current=$(rpm -q --qf '%{VERSION}-%{RELEASE}' linux-image-generic 2>/dev/null || echo "not-installed")
else
    current="unknown"
fi
log "Current: $current"

log "Backup: snapshotting config"
backup="/var/backups/cve-2014-0196-$(date +%Y%m%d-%H%M)"
mkdir -p "$backup"
[ -d /etc/linux-image-generic ] && cp -a /etc/linux-image-generic "$backup/" || true

log "Upgrade: applying vendor patch"
if command -v apt-get >/dev/null 2>&1; then
    sudo apt-get update -qq
    sudo apt-get install -y --only-upgrade linux-image-generic
elif command -v dnf >/dev/null 2>&1; then
    sudo dnf upgrade -y linux-image-generic
elif command -v yum >/dev/null 2>&1; then
    sudo yum update -y linux-image-generic
fi

log "Verify: re-reading linux-image-generic version"
if command -v dpkg >/dev/null 2>&1; then
    after=$(dpkg-query -W -f='${Version}' linux-image-generic)
else
    after=$(rpm -q --qf '%{VERSION}-%{RELEASE}' linux-image-generic)
fi
log "After: $after"

if [ "$after" != "$current" ]; then
    log "SUCCESS: linux-image-generic upgraded"
else
    log "WARN: version unchanged. Confirm the patched build is in your repository."
    exit 1
fi

After the upgrade, restart any service that loads the patched binary so the new code is actually running.

If you can't patch immediately

Patching is the only durable fix. These mitigations cut exposure while the change window is scheduled, they do not remove the vulnerability.

# No vendor-published workaround for CVE-2014-0196 beyond the patch.
# Reduce the blast radius until the patched build is deployed:
#   - Restrict network access to the affected service to known admin hosts
#   - Disable the vulnerable feature in config if the product allows it
#   - Increase logging on the affected endpoints and watch for IoCs

How to verify the fix worked

After applying the patched build, confirm the version string matches the fixed release named in the Linux advisory.

dpkg -s linux-image-generic | grep -i version       # Debian / Ubuntu
rpm -q linux-image-generic                          # RHEL / Rocky

Run an authenticated vulnerability scan with a current signature set and confirm the scanner no longer flags CVE-2014-0196. For internet-facing deployments that were unpatched during the disclosure window, review logs for the affected endpoints over the full exposure period and rotate any credentials the vulnerable process could touch.

Frequently asked questions

Is CVE-2014-0196 being exploited in the wild?

Yes. CISA added CVE-2014-0196 to the Known Exploited Vulnerabilities catalog, which means active exploitation has been confirmed.

Will a firewall rule or WAF signature fully mitigate CVE-2014-0196?

No. Network-layer filters slow opportunistic scanners and block a subset of payloads, but a focused attacker who knows the bug will work around them. The vendor patch is the only durable fix.

Do I need to assume compromise if the affected service was internet-facing and unpatched?

For a CVE that CISA confirms is under active exploitation, yes. Review logs for the affected endpoints over the entire exposure window, rotate credentials the vulnerable process could read, and look for unexpected accounts, scheduled tasks, or outbound connections.

References

• Official vendor advisory: http://www.ubuntu.com/usn/USN-2203-1
• NVD entry: https://nvd.nist.gov/vuln/detail/CVE-2014-0196
• CISA KEV catalog: https://www.cisa.gov/known-exploited-vulnerabilities-catalog
• CISA KEV record: https://www.cisa.gov/known-exploited-vulnerabilities-catalog?field_cve=CVE-2014-0196
• Additional reference: http://support.f5.com/kb/en-us/solutions/public/15000/300/sol15319.html
• Additional reference: http://www.osvdb.org/106646
• Additional reference: http://lists.opensuse.org/opensuse-security-announce/2014-05/msg00012.html
• Additional reference: http://www.openwall.com/lists/oss-security/2014/05/05/6

*This guide was assembled from the official vendor advisory, the NVD record, and the CISA KEV catalog entry on 2026-05-25. Always confirm against the vendor advisory before applying changes in production.*