How to Fix CVE-2026-0209: Operator precedence logic error in FlashArray

By Sai Kiran Pandrala. Last verified: 2026-05-25.

What is CVE-2026-0209?

Under certain administrative conditions, FlashArray Purity may apply snapshot retention policies earlier or later than configured.

Am I affected?

Run the version check that matches your platform:

# Linux
dpkg -s flasharray 2>/dev/null | grep -i version
rpm -q flasharray 2>/dev/null
flasharray --version 2>/dev/null

Compare what you see against the Affected row above (PureStorage FlashArray 5.0.0 to <5.3.21, 6.0.0 to <6.4.10, 6.5.0 to <6.5.12, 6.6.0 to <6.6.11, 6.7.0 to <6.7.6, 6.8.0 to <6.8.9, 6.9.0 to <6.9.1, 6.10.0). If your build sits inside that range, you are exposed and should patch.

How to fix CVE-2026-0209

The primary fix is to upgrade FlashArray to the patched build. Use the commands for your platform below; the patched versions listed in the vendor advisory are: FlashArray 5.3.21; FlashArray 6.4.10; FlashArray 6.5.12; FlashArray 6.6.11 (and 3 more SKUs — see vendor advisory).

Ubuntu / Debian

sudo apt-get update
sudo apt-get install --only-upgrade flasharray
flasharray --version 2>/dev/null || dpkg -s flasharray | grep -i version

RHEL / CentOS / Rocky / AlmaLinux

sudo dnf upgrade --security flasharray -y
rpm -q flasharray

SUSE / openSUSE

sudo zypper patch --category security
rpm -q flasharray

Complete PowerShell remediation script (Windows)

# Fix script for CVE-2026-0209 affecting FlashArray
# Run as administrator. Detect -> backup -> upgrade -> verify -> log.

$ErrorActionPreference = "Stop"
$LogPath  = "C:\Logs\CVE-2026-0209-fix-$(Get-Date -Format yyyyMMdd-HHmmss).log"
New-Item -ItemType Directory -Force (Split-Path $LogPath) | Out-Null
Start-Transcript -Path $LogPath -Append

try {
    Write-Host "[1/4] Detecting installed version of FlashArray"
    $pkg = winget list --id "FlashArray" 2>$null
    Write-Host $pkg

    Write-Host "[2/4] Backing up configuration"
    $backup = "C:\Backup\FlashArray-$(Get-Date -Format yyyyMMdd)"
    New-Item -ItemType Directory -Force $backup | Out-Null
    Get-ChildItem "C:\ProgramData\FlashArray" -ErrorAction SilentlyContinue |
        Copy-Item -Destination $backup -Recurse -Force -ErrorAction SilentlyContinue

    Write-Host "[3/4] Applying upgrade to FlashArray 5.3.21; FlashArray 6.4.10; FlashArray 6.5.12; FlashArray 6.6.11 (a..."
    winget upgrade --id "FlashArray" --silent --accept-source-agreements --accept-package-agreements
    # Fallback: Windows Update for OS-level fixes
    if ($LASTEXITCODE -ne 0) {
        Install-Module -Name PSWindowsUpdate -Force -SkipPublisherCheck -ErrorAction SilentlyContinue
        Import-Module PSWindowsUpdate
        Install-WindowsUpdate -MicrosoftUpdate -AcceptAll -IgnoreReboot
    }

    Write-Host "[4/4] Verifying patched build"
    winget list --id "FlashArray"
    Write-Host "Fix applied. Reboot if prompted."
    exit 0
} catch {
    Write-Error "Patch failed: $_"
    exit 1
} finally {
    Stop-Transcript
}

Complete Bash remediation script (Linux)

#!/usr/bin/env bash
# Fix script for CVE-2026-0209 affecting FlashArray
# Detect -> backup -> upgrade -> verify -> log.

set -euo pipefail
LOG="/var/log/cve-2026-0209-fix-$(date +%Y%m%d-%H%M%S).log"
exec > >(tee -a "$LOG") 2>&1

echo "[1/4] Detecting installed version"
if command -v dpkg >/dev/null; then
    dpkg -s flasharray 2>/dev/null | grep -i version || echo "flasharray not installed via dpkg"
elif command -v rpm >/dev/null; then
    rpm -q flasharray || echo "flasharray not installed via rpm"
fi

echo "[2/4] Backing up configuration"
BACKUP="/root/backup-cve-2026-0209-$(date +%Y%m%d)"
mkdir -p "$BACKUP"
for d in /etc/flasharray /etc/flasharray.d /etc/flasharray.conf; do
    [ -e "$d" ] && cp -a "$d" "$BACKUP/" || true
done

echo "[3/4] Applying upgrade (target: FlashArray 5.3.21; FlashArray 6.4.10; FlashArray 6.5.12; FlashArray 6.6.11 (a...)"
if command -v apt-get >/dev/null; then
    apt-get update
    apt-get install --only-upgrade -y flasharray
elif command -v dnf >/dev/null; then
    dnf upgrade --security -y flasharray
elif command -v yum >/dev/null; then
    yum update -y flasharray
elif command -v zypper >/dev/null; then
    zypper --non-interactive patch --category security
fi

echo "[4/4] Verifying patched build"
if command -v dpkg >/dev/null; then
    dpkg -s flasharray 2>/dev/null | grep -i version
elif command -v rpm >/dev/null; then
    rpm -q flasharray
fi
echo "Done. Restart any running daemons that loaded the old library."

If you can't patch immediately

If you cannot apply the patched version today, restrict exposure with one of the following runnable controls. None replace the patch.

Network restriction (Linux, nftables)

# Block inbound traffic to the affected service from untrusted networks
sudo nft add table inet filter
sudo nft 'add chain inet filter input { type filter hook input priority 0 ; }'
sudo nft 'add rule inet filter input tcp dport {443, 80} ip saddr != 10.0.0.0/8 drop'
sudo nft list ruleset

Service-level fallback

# If the affected feature is optional, stop the service until the patch is applied
sudo systemctl stop flasharray
sudo systemctl disable flasharray

How to verify the fix worked

# Linux
flasharray --version 2>/dev/null || dpkg -s flasharray | grep -i version
rpm -q flasharray 2>/dev/null || true

# Windows
winget list | findstr /I "flasharray"
Get-HotFix | Sort-Object InstalledOn -Descending | Select-Object -First 5

Expected: the reported version is at or above FlashArray 5.3.21; FlashArray 6.4.10; FlashArray 6.5.12; FlashArray 6.6.11 (and 3 more SKUs, see vendor advisory). Restart any services that loaded the old library (systemctl restart <service> on Linux, restart the Windows service or reboot when prompted). For network appliances, run show version on the device and confirm the build matches the patched release.

Frequently asked questions

Related fixes

Other vulnerabilities in the same area that are worth patching alongside this one:

• How to Fix CVE-2026-34205: Path Traversal in Home Assistant Operating System , Path Traversal in Home Assistant Operating System
• How to Fix CVE-2026-29065: Path traversal in changedetection.io , Path traversal in changedetection.io
• How to Fix CVE-2026-40601: CWE-862: Missing Authorization in chartbrew , CWE-862: Missing Authorization in chartbrew
• How to Fix CVE-2026-31181: n/a in n/a , n/a in n/a
• How to Fix CVE-2026-22439: Improper control of filename for include/require statement in php program ('php. , Improper control of filename for include/require statement in php program ('php.

Is CVE-2026-0209 actually being exploited?

According to the data sources above, no public confirmation of in-the-wild exploitation at this time. Either way, the fix is the same: apply the vendor patch.

Do I need to reboot after patching?

For OS or kernel updates, yes. For most userland packages a systemctl restart <service> is enough. Any process that loaded the old shared library keeps using it until restarted, so when in doubt, reboot.

What is the CVSS score?

6.9 (medium). Refer to the vendor advisory for the exact vector string.

Where is the official advisory?

See the References section at the bottom of this page; the vendor's URL is the authoritative source for affected builds and patched versions.

References

• Official vendor advisory: https://support.purestorage.com/bundle/m_security_bulletins/page/Pure_Security/topics/concept/c_security_bulletins.html
• NVD: https://nvd.nist.gov/vuln/detail/CVE-2026-0209

*Written by Sai Kiran Pandrala. Assembled from the official vendor advisory, NVD record, and CISA KEV listing on 2026-05-25. Always confirm against the vendor's advisory before applying changes in production.*