⚠ Reference material — not professional advice. Test in staging, back up first, verify against your specific version. Use your own judgment for your environment.
● Medium · CVSS 6.9

How to Fix CVE-2026-22189: Stack Buffer Overflow in Panda3D

Other vulnerabilities in the same area that are worth patching alongside this one:

*By Sai Kiran Pandrala*

⚡ At a glance
SeverityCVSS 6.9 - Medium
Actively exploited?Not currently listed in CISA KEV
Affected0 <= 1.10.16
Fixed inSee vendor advisory
Type (CWE)CWE-121: Stack-based Buffer Overflow

What is CVE-2026-22189?

CVE-2026-22189 is a stack-based buffer overflow in Panda3D. A remote attacker can send a crafted message that overflows a fixed-size stack buffer, corrupting the return address and, on un-mitigated builds, achieving code execution. Vendor description: Panda3D versions up to and including 1.10.16 egg-mkfont contains a stack-based buffer overflow vulnerability due to use of an unbounded sprintf() call with attacker-controlled input. When constructing glyph filenames, egg-mkfont formats a user-supplied glyph pattern (-gp) into a fixed-size stack buffer without length validation.

Why this CVE matters

Stack-based buffer overflows in network-reachable services have driven some of the highest-impact incidents of the past two years. Modern compiler protections raise the bar, but real-world exploits for unpatched appliances continue to appear quickly after disclosure.

For deployments of Panda3D that have been exposed to the public internet during the disclosure window, the operating assumption should be that scanning has already happened. Even where exploitation has not been publicly observed, scanning for the vulnerable fingerprint is cheap and routine. Patching closes the door; log review and credential rotation close out the rest of the response.

Am I affected?

You are affected if your installation matches any of these version ranges:

Check your installed version against the list above. If you cannot determine the version, treat the system as affected and follow the upgrade path below.

Open Panda3D's About dialog or run the vendor-documented version-check command. Compare the result against the affected ranges in the advisory.

How to fix CVE-2026-22189

  1. Read the vendor advisory in full: https://www.panda3d.org/
  2. Upgrade Panda3D to the patched build listed in the vendor advisory.
  3. Back up the configuration (and database, where applicable) before upgrading.
  4. Apply the patch in a maintenance window. For HA pairs, upgrade the standby node first, fail over, then upgrade the former primary.
  5. Restart the affected service so the patched binary loads, then verify the new version (see verification section).

Ubuntu / Debian

_Verify the exact patched build against the vendor advisory: https://seclists.org/fulldisclosure/2026/Jan/10_


sudo apt-get update
sudo apt-get install --only-upgrade panda3d
dpkg -s panda3d | grep -i version

RHEL / Rocky / AlmaLinux / Fedora


sudo dnf upgrade --refresh panda3d -y
rpm -q panda3d

openSUSE


sudo zypper refresh
sudo zypper update panda3d
rpm -q panda3d

Bash detect / upgrade / verify runner (Linux)

_Verify the exact patched build against the vendor advisory: https://seclists.org/fulldisclosure/2026/Jan/10_


#!/usr/bin/env bash
# CVE-2026-22189 remediation runner. Re-runnable; exits non-zero on failure.
set -euo pipefail
log() { printf '%s %s\n' "$(date -Is)" "$*" | tee -a /var/log/cve-2026-22189-fix.log; }

PKG="panda3d"
TARGET_VERSION="see vendor advisory"

log "Detect: reading current $PKG version"
if command -v dpkg >/dev/null 2>&1; then
    current=$(dpkg-query -W -f='${Version}' "$PKG" 2>/dev/null || echo "not-installed")
elif command -v rpm >/dev/null 2>&1; then
    current=$(rpm -q --qf '%{VERSION}-%{RELEASE}' "$PKG" 2>/dev/null || echo "not-installed")
else
    current="unknown"
fi
log "Current: $current (target per advisory: $TARGET_VERSION)"

log "Backup: snapshotting /etc/$PKG if present"
backup="/var/backups/cve-2026-22189-$(date +%Y%m%d-%H%M)"
mkdir -p "$backup"
[ -d "/etc/$PKG" ] && cp -a "/etc/$PKG" "$backup/" || true

log "Upgrade: applying vendor patch"
if command -v apt-get >/dev/null 2>&1; then
    sudo apt-get update -qq
    sudo apt-get install -y --only-upgrade "$PKG"
elif command -v dnf >/dev/null 2>&1; then
    sudo dnf upgrade -y "$PKG"
elif command -v yum >/dev/null 2>&1; then
    sudo yum update -y "$PKG"
fi

log "Verify: re-reading $PKG version"
if command -v dpkg >/dev/null 2>&1; then
    after=$(dpkg-query -W -f='${Version}' "$PKG")
else
    after=$(rpm -q --qf '%{VERSION}-%{RELEASE}' "$PKG")
fi
log "After: $after"

if [ "$after" != "$current" ]; then
    log "SUCCESS: $PKG upgraded"
else
    log "WARN: version unchanged. Confirm the patched build is in your repository."
    exit 1
fi

Verify the fix landed


# 1. Confirm the running version matches the patched build
#    (target per advisory: see vendor advisory)
#    Use the platform-specific version probe shown above.

# 2. Re-scan the host with your vulnerability scanner (Nessus, Qualys, Tenable,
#    Rapid7, OpenVAS). The scanner should no longer flag CVE-2026-22189.

# 3. Inspect service and kernel logs for crash-loops or rollback events
journalctl --since "10 minutes ago" | grep -iE 'error|fail|panic'
dmesg --since "10 minutes ago" | tail -50

If you cannot patch immediately

Block network reachability to the vulnerable service from untrusted networks and apply the patched build. Memory-corruption bugs cannot be reliably mitigated at the network layer; the patch is the fix.

How to verify the fix worked

If your installation was internet-reachable during the disclosure window, treat log review as part of the remediation rather than an optional follow-up. Look for repeated service restarts, crash logs from the affected daemon, and core files generated around the time of any anomalous traffic. A memory-corruption flaw used for exploitation often leaves a trail of failed attempts before the successful one.

Frequently asked questions

Is CVE-2026-22189 being exploited in the wild?

Public exploitation has not been confirmed by CISA at the time of writing. Treat the patch as time-sensitive anyway; reports often lag actual abuse.

Will a WAF or IDS rule fully mitigate CVE-2026-22189?

No. Network-layer filters can reduce noise and slow opportunistic scanners, but they will not stop a determined attacker. The vendor patch is the only durable fix.

How long should I plan for the upgrade?

Typical vendor-documented upgrade windows for Panda3D run from a few minutes to under an hour depending on cluster size. Test in a staging environment first and follow the vendor's documented HA upgrade order.

References

*This guide was assembled from the official vendor advisory, the NVD record, and the CISA KEV catalog entry on 2026-05-25. Always confirm against the vendor advisory before applying changes in production.*