⚠ Reference material — not professional advice. Test in staging, back up first, verify against your specific version. Use your own judgment for your environment.
● Medium · CVSS 5.3

How to Fix CVE-2026-22911: Hard-coded Credentials in TDC-X401GL

Other vulnerabilities in the same area that are worth patching alongside this one:

*By Sai Kiran Pandrala*

⚡ At a glance
SeverityCVSS 5.3 - Medium
Actively exploited?Not currently listed in CISA KEV
Affectedall versions
Fixed infiles
Type (CWE)CWE-798: Use of Hard-coded Credentials

What is CVE-2026-22911?

CVE-2026-22911 is a hard-coded credentials issue in TDC-X401GL. The product ships with a built-in account or key that anyone with a copy of the software can recover and use to log in. Vendor description: Firmware update files may expose password hashes for system accounts, which could allow a remote attacker to recover credentials and gain unauthorized access to the device.

Why this CVE matters

Hard-coded credentials are the lowest-effort path to compromise. Once the secret is reverse-engineered out of the firmware or source, every deployment of the same version is reachable by anyone with the advisory text.

For deployments of TDC-X401GL that have been exposed to the public internet during the disclosure window, the operating assumption should be that scanning has already happened. Even where exploitation has not been publicly observed, scanning for the vulnerable fingerprint is cheap and routine. Patching closes the door; log review and credential rotation close out the rest of the response.

Am I affected?

You are affected if your installation matches any of these version ranges:

Check your installed version against the list above. If you cannot determine the version, treat the system as affected and follow the upgrade path below.

Open TDC-X401GL's About dialog or run the vendor-documented version-check command. Compare the result against the affected ranges in the advisory.

How to fix CVE-2026-22911

  1. Read the vendor advisory in full: https://sick.com/psirt
  2. Upgrade TDC-X401GL to the patched build listed in the vendor advisory.
  3. Back up the configuration (and database, where applicable) before upgrading.
  4. Apply the patch in a maintenance window. For HA pairs, upgrade the standby node first, fail over, then upgrade the former primary.
  5. Restart the affected service so the patched binary loads, then verify the new version (see verification section).

Ubuntu / Debian

_Verify the exact patched build against the vendor advisory: https://www.sick.com/.well-known/csaf/white/2026/sca-2026-0001.pdf_


sudo apt-get update
sudo apt-get install --only-upgrade tdc-x401gl
dpkg -s tdc-x401gl | grep -i version

RHEL / Rocky / AlmaLinux / Fedora


sudo dnf upgrade --refresh tdc-x401gl -y
rpm -q tdc-x401gl

openSUSE


sudo zypper refresh
sudo zypper update tdc-x401gl
rpm -q tdc-x401gl

Bash detect / upgrade / verify runner (Linux)

_Verify the exact patched build against the vendor advisory: https://www.sick.com/.well-known/csaf/white/2026/sca-2026-0001.pdf_


#!/usr/bin/env bash
# CVE-2026-22911 remediation runner. Re-runnable; exits non-zero on failure.
set -euo pipefail
log() { printf '%s %s\n' "$(date -Is)" "$*" | tee -a /var/log/cve-2026-22911-fix.log; }

PKG="tdc-x401gl"
TARGET_VERSION="see vendor advisory"

log "Detect: reading current $PKG version"
if command -v dpkg >/dev/null 2>&1; then
    current=$(dpkg-query -W -f='${Version}' "$PKG" 2>/dev/null || echo "not-installed")
elif command -v rpm >/dev/null 2>&1; then
    current=$(rpm -q --qf '%{VERSION}-%{RELEASE}' "$PKG" 2>/dev/null || echo "not-installed")
else
    current="unknown"
fi
log "Current: $current (target per advisory: $TARGET_VERSION)"

log "Backup: snapshotting /etc/$PKG if present"
backup="/var/backups/cve-2026-22911-$(date +%Y%m%d-%H%M)"
mkdir -p "$backup"
[ -d "/etc/$PKG" ] && cp -a "/etc/$PKG" "$backup/" || true

log "Upgrade: applying vendor patch"
if command -v apt-get >/dev/null 2>&1; then
    sudo apt-get update -qq
    sudo apt-get install -y --only-upgrade "$PKG"
elif command -v dnf >/dev/null 2>&1; then
    sudo dnf upgrade -y "$PKG"
elif command -v yum >/dev/null 2>&1; then
    sudo yum update -y "$PKG"
fi

log "Verify: re-reading $PKG version"
if command -v dpkg >/dev/null 2>&1; then
    after=$(dpkg-query -W -f='${Version}' "$PKG")
else
    after=$(rpm -q --qf '%{VERSION}-%{RELEASE}' "$PKG")
fi
log "After: $after"

if [ "$after" != "$current" ]; then
    log "SUCCESS: $PKG upgraded"
else
    log "WARN: version unchanged. Confirm the patched build is in your repository."
    exit 1
fi

Verify the fix landed


# 1. Confirm the running version matches the patched build
#    (target per advisory: see vendor advisory)
#    Use the platform-specific version probe shown above.

# 2. Re-scan the host with your vulnerability scanner (Nessus, Qualys, Tenable,
#    Rapid7, OpenVAS). The scanner should no longer flag CVE-2026-22911.

# 3. Inspect service and kernel logs for crash-loops or rollback events
journalctl --since "10 minutes ago" | grep -iE 'error|fail|panic'
dmesg --since "10 minutes ago" | tail -50

If you cannot patch immediately

No official workaround exists beyond restricting network exposure to the affected component. Apply the vendor patch as the primary remediation.

How to verify the fix worked

If your installation was internet-reachable during the disclosure window, treat log review as part of the remediation rather than an optional follow-up. Look for unexpected administrator accounts in TDC-X401GL, scheduled tasks or cron jobs you did not create, new files in web-accessible directories, and outbound connections to addresses not in your baseline. Suspicious requests to the vulnerable endpoint immediately followed by successful 200-class responses with unusually large bodies are a strong indicator of exploitation.

Frequently asked questions

Is CVE-2026-22911 being exploited in the wild?

Public exploitation has not been confirmed by CISA at the time of writing. Treat the patch as time-sensitive anyway; reports often lag actual abuse.

Will a WAF or IDS rule fully mitigate CVE-2026-22911?

No. Network-layer filters can reduce noise and slow opportunistic scanners, but they will not stop a determined attacker. The vendor patch is the only durable fix.

How long should I plan for the upgrade?

Typical vendor-documented upgrade windows for TDC-X401GL run from a few minutes to under an hour depending on cluster size. Test in a staging environment first and follow the vendor's documented HA upgrade order.

References

*This guide was assembled from the official vendor advisory, the NVD record, and the CISA KEV catalog entry on 2026-05-25. Always confirm against the vendor advisory before applying changes in production.*