● High · CVSS 8.1

How to Fix CVE-2026-2603: Missing Authentication for Critical Function

Q: Is CVE-2026-2603 being actively exploited?

Not at the time of writing. It is not listed in CISA's Known Exploited Vulnerabilities catalog. That status can change, so monitor the vendor advisory and the KEV catalog if the system is exposed.

Q: How severe is CVE-2026-2603?

CVSS rates it 8.1 (High). Use that score to set your patch priority next to the other items in your queue.

Q: Do I have to take Red Hat build of Keycloak 26.2 offline to apply the patch?

It depends on the deployment. High-availability or clustered installs can usually patch one node at a time with no full outage. Standalone installs typically need a short restart. Always follow the vendor's documented upgrade steps.

Q: What if my vulnerability scanner still flags CVE-2026-2603 after I patch?

Re-run the scan after a service restart, then confirm the scanner's plugin set is up to date. Some scanners detect by banner version only and lag the official fix metadata by a release.

Other vulnerabilities in the same area that are worth patching alongside this one:

How to Fix CVE-2026-29082: Cross-site scripting in kestra — Cross-site scripting in kestra
How to Fix CVE-2026-5203: Path Traversal in CMS Made Simple — Path Traversal in CMS Made Simple
How to Fix CVE-2026-29644: n/a in n/a , n/a in n/a
How to Fix CVE-2026-20733: Weak credential storage in cloudcharge.se , Weak credential storage in cloudcharge.se
How to Fix CVE-2026-25160: Code Injection RCE in alist , Code Injection RCE in alist

*By Sai Kiran Pandrala*

⚡ At a glance


Severity	CVSS 8.1, High
Actively exploited?	No
Affected	Red Hat build of Keycloak 26.2 (26.2.14-1 < ); Red Hat build of Keycloak 26.2 (26.2-16 < ); Red Hat build of Keycloak 26.2 (26.2-16 < *); Red Hat build of Keycloak 26.2.14 (see advisory)
Fixed in	See vendor advisory
Type (CWE)	CWE-306: Missing Authentication for Critical Function

What is CVE-2026-2603?

A flaw was found in Keycloak. A remote attacker could bypass security controls by sending a valid SAML response from an external Identity Provider (IdP) to the Keycloak SAML endpoint for IdP-initiated broker logins. This allows the attacker to complete broker logins even when the SAML Identity Provider is disabled, leading to unauthorized authentication.

In practical terms, a successful attacker gets a security bypass on the affected component. There is no confirmed in-the-wild exploitation listed in CISA's KEV catalog at the time of writing, but the CVSS rating still warrants prompt patching.

Am I affected?

You're affected if you run Red Hat build of Keycloak 26.2 at any version in the Affected row above. Use these probes to find your installed build:


# Confirm the installed version via your package manager
dpkg -l | grep -i red   # Debian/Ubuntu
rpm -qa | grep -i red   # RHEL/CentOS/Rocky

How to fix CVE-2026-2603

The primary fix is to upgrade to the patched build listed in the Fixed in row above (See vendor advisory). Pick the platform that matches your install and run the commands below.

RHEL / CentOS / Rocky


sudo dnf upgrade --security -y
rpm -qa | grep -i red

PowerShell script (Windows) - detect, back up, upgrade, verify, log


# Vendor advisory: https://access.redhat.com/errata/RHSA-2026:3925
# Run as Administrator
$ErrorActionPreference = 'Stop'
$log = "$env:ProgramData\RedHatbuildofKeycloak262-Patch-CVE-2026-2603.log"
function Write-Log($msg) { "$(Get-Date -Format s)  $msg" | Tee-Object -FilePath $log -Append }

Write-Log "Starting CVE-2026-2603 remediation for Red Hat Red Hat build of Keycloak 26.2"

# 1. Detect: replace the path/version probe with one valid for your install
$installed = (Get-WmiObject -Class Win32_Product |
    Where-Object { $_.Name -like '*Red*' } |
    Select-Object -First 1 -ExpandProperty Version)
Write-Log "Detected version: $installed"

if (-not $installed) {
    Write-Log "Product not installed on this host; nothing to do."
    return
}
if ([version]$installed -ge [version]'<patched-version>') {
    Write-Log "Already at fixed version $installed; no action needed."
    return
}

# 2. Backup configuration to a timestamped folder
$backup = "$env:ProgramData\RedHatbuildofKeycloak262-Backup-$(Get-Date -Format yyyyMMdd-HHmm)"
New-Item -ItemType Directory -Path $backup -Force | Out-Null
# Adjust the source path to match your install
$src = "$env:ProgramFiles\Red Hat\Red Hat build of Keycloak 26.2"
if (Test-Path $src) { Copy-Item -Path $src -Destination $backup -Recurse -Force }
Write-Log "Backed up config to $backup"

# 3. Apply the patched installer (place the verified file on a share or staging path)
$installer = "$env:TEMP\RedHatbuildofKeycloak262-<patched-version>.msi"
if (-not (Test-Path $installer)) {
    throw "Patched installer not found at $installer. Stage it from your software repo first."
}
Start-Process msiexec.exe -ArgumentList "/i `"$installer`" /qn /norestart" -Wait
Write-Log "Installer finished"

# 4. Verify
$verify = (Get-WmiObject -Class Win32_Product |
    Where-Object { $_.Name -like '*Red*' } |
    Select-Object -First 1 -ExpandProperty Version)
if ([version]$verify -ge [version]'<patched-version>') {
    Write-Log "SUCCESS: now at $verify (>= <patched-version>)"
} else {
    Write-Log "FAILURE: still at $verify after install"
    exit 1
}

Bash script (Linux) - detect, back up, upgrade, verify, log


# Vendor advisory: https://access.redhat.com/errata/RHSA-2026:3925
#!/usr/bin/env bash
set -euo pipefail
LOG=/var/log/red-hat-build-of-keycloak-26-2-patch-cve-2026-2603.log
log()  { echo "$(date -Iseconds)  $*" | tee -a "$LOG"; }

log "Starting CVE-2026-2603 remediation for Red Hat Red Hat build of Keycloak 26.2"

# 1. Detect installed version (works for deb and rpm packages)
if command -v dpkg >/dev/null && dpkg -s red-hat-build-of-keycloak-26-2 >/dev/null 2>&1; then
    CURRENT=$(dpkg-query -W -f='${Version}' red-hat-build-of-keycloak-26-2)
    PKG_MGR=apt
elif command -v rpm >/dev/null && rpm -q red-hat-build-of-keycloak-26-2 >/dev/null 2>&1; then
    CURRENT=$(rpm -q --queryformat '%{VERSION}' red-hat-build-of-keycloak-26-2)
    PKG_MGR=dnf
else
    log "red-hat-build-of-keycloak-26-2 not installed via apt or rpm; check your package manager or vendor instructions."
    exit 0
fi
log "Detected: red-hat-build-of-keycloak-26-2=$CURRENT (manager=$PKG_MGR)"

# 2. Backup config
BACKUP=/var/backups/red-hat-build-of-keycloak-26-2-$(date +%Y%m%d-%H%M)
mkdir -p "$BACKUP"
for d in /etc/red-hat-build-of-keycloak-26-2 /etc/${pkg%%-*} ; do
    [ -d "$d" ] && cp -a "$d" "$BACKUP/" && log "Backed up $d to $BACKUP"
done

# 3. Upgrade
if [ "$PKG_MGR" = apt ]; then
    sudo apt-get update -y
    sudo apt-get install --only-upgrade -y red-hat-build-of-keycloak-26-2
else
    sudo dnf upgrade --security -y red-hat-build-of-keycloak-26-2
fi

# 4. Verify
if [ "$PKG_MGR" = apt ]; then
    NEW=$(dpkg-query -W -f='${Version}' red-hat-build-of-keycloak-26-2)
else
    NEW=$(rpm -q --queryformat '%{VERSION}' red-hat-build-of-keycloak-26-2)
fi
log "After upgrade: $NEW"

# Optionally compare against <patched-version> with dpkg --compare-versions or sort -V
log "Done. Restart the affected service if the package install did not."

If you can't patch immediately

These are runnable hardening commands. They reduce blast radius but they're not a replacement for the vendor patch.

No official vendor workaround is published for this CVE; patching is the only documented fix. The runnable hardening below is generic defense in depth, not a substitute for the patch.

Restrict the affected service to trusted networks (Linux):


# Vendor advisory: https://access.redhat.com/errata/RHSA-2026:3925
# Replace <port> with the affected service port and 10.0.0.0/24 with your admin subnet
sudo iptables -A INPUT -p tcp --dport <port> -s 10.0.0.0/24 -j ACCEPT
sudo iptables -A INPUT -p tcp --dport <port> -j DROP

Windows Firewall equivalent:


# Vendor advisory: https://access.redhat.com/errata/RHSA-2026:3925
New-NetFirewallRule -DisplayName 'Allow affected service from admin subnet' \
    -Direction Inbound -Action Allow -Protocol TCP -LocalPort <port> -RemoteAddress 10.0.0.0/24
New-NetFirewallRule -DisplayName 'Block affected service from everywhere else' \
    -Direction Inbound -Action Block -Protocol TCP -LocalPort <port>

How to verify the fix worked

Run the version probe again and confirm the running build matches the Fixed in row above.


# Confirm the running build matches the patched version listed by the vendor
# Example for Linux package installs:
dpkg -l | grep -i "red"   # Debian/Ubuntu
rpm -qa | grep -i "red"   # RHEL/CentOS/Rocky

Expected output: the package version should meet or exceed the patched build.

Then re-run any vulnerability scanner you used previously and confirm the finding for CVE-2026-2603 has cleared. Sweep your logs for the indicators of compromise listed in the vendor or CISA advisory, especially if the system was internet-reachable during the disclosure window.

Frequently asked questions

Is CVE-2026-2603 being actively exploited?