How to Fix CVE-2026-2964: Improperly controlled modification of object prototype attributes in web-audio-recorder-js

By Sai Kiran Pandrala. Last verified: 2026-05-25.

CVE-2026-2964 is a improperly controlled modification of object prototype attributes in higuma web-audio-recorder-js. The fix is to apply the vendor patch noted below.

What is CVE-2026-2964?

A vulnerability was identified in higuma web-audio-recorder-js 0.1/0.1.1. Impacted is the function extend in the library lib/WebAudioRecorder.js of the component Dynamic Config Handling. Such manipulation leads to improperly controlled modification of object prototype attributes. It is possible to launch the attack remotely. Attacks of this nature are highly complex. The exploitability is considered difficult. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. The CVSS base score is 2.3 (Low). The official advisory is at https://vuldb.com/?id.347331.

Am I affected?

Check the version of web-audio-recorder-js you are running and compare it against the Affected row above (web-audio-recorder-js 0.1; web-audio-recorder-js 0.1.1). If your build sits inside the affected range, you must patch.

Run the version check that fits your platform:

# Linux package check
dpkg -s web-audio-recorder-js 2>/dev/null | grep -i ^Version
rpm -q web-audio-recorder-js 2>/dev/null
command -v web-audio-recorder-js >/dev/null && web-audio-recorder-js --version 2>/dev/null

# Windows (PowerShell)
Get-Package -Name "*web-audio-recorder-js*" -ErrorAction SilentlyContinue | Select-Object Name, Version
winget list --name "web-audio-recorder-js" 2>$null

How to fix CVE-2026-2964

Upgrade web-audio-recorder-js to a patched build: See vendor advisory. The vendor advisory is the source of truth for the exact fixed version.

Ubuntu / Debian

sudo apt-get update
sudo apt-get install --only-upgrade web-audio-recorder-js
dpkg -s web-audio-recorder-js | grep -i ^Version

RHEL / CentOS / Rocky / AlmaLinux

sudo dnf upgrade --refresh web-audio-recorder-js -y
# or for older releases:
sudo yum update web-audio-recorder-js -y
rpm -q web-audio-recorder-js

SUSE / openSUSE

sudo zypper refresh
sudo zypper update web-audio-recorder-js
rpm -q web-audio-recorder-js

Node.js / npm

# Update the affected package in your project
npm install web-audio-recorder-js@latest
npm ls web-audio-recorder-js
npm audit fix

Complete PowerShell remediation script (Windows)

# Fix script for CVE-2026-2964 affecting web-audio-recorder-js
# Run as administrator. Detect -> backup -> upgrade -> verify -> log.

$ErrorActionPreference = "Stop"
$LogPath  = "C:\Logs\CVE-2026-2964-fix-$(Get-Date -Format yyyyMMdd-HHmmss).log"
New-Item -ItemType Directory -Force (Split-Path $LogPath) | Out-Null
Start-Transcript -Path $LogPath -Append

try {
    Write-Host "[1/4] Detect installed version"
    $pkg = Get-Package -Name "*web-audio-recorder-js*" -ErrorAction SilentlyContinue
    if ($pkg) { $pkg | Format-Table Name, Version }
    else { Write-Host "Not detected via Get-Package; try winget list" }

    Write-Host "[2/4] Backup configuration"
    $backup = "C:\Backup\web-audio-recorder-js-$(Get-Date -Format yyyyMMdd)"
    New-Item -ItemType Directory -Force $backup | Out-Null
    Get-ChildItem "C:\ProgramData\web-audio-recorder-js" -ErrorAction SilentlyContinue |
        Copy-Item -Destination $backup -Recurse -Force -ErrorAction SilentlyContinue

    Write-Host "[3/4] Apply the upgrade to See vendor advisory"
    winget upgrade --name "web-audio-recorder-js" --silent --accept-source-agreements --accept-package-agreements
    if ($LASTEXITCODE -ne 0) {
        # Fallback: pull latest via OS update channel
        Install-Module -Name PSWindowsUpdate -Force -SkipPublisherCheck -ErrorAction SilentlyContinue
        Import-Module PSWindowsUpdate
        Install-WindowsUpdate -MicrosoftUpdate -AcceptAll -IgnoreReboot
    }

    Write-Host "[4/4] Verify the patched build"
    winget list --name "web-audio-recorder-js"
    Write-Host "Patch applied. Reboot if prompted."
    exit 0
} catch {
    Write-Error "Patch failed: $_"
    exit 1
} finally {
    Stop-Transcript
}

Complete Bash remediation script (Linux)

#!/usr/bin/env bash
# Fix script for CVE-2026-2964 affecting web-audio-recorder-js
# Detect -> backup -> upgrade -> verify -> log.

set -euo pipefail
LOG="/var/log/cve-2026-2964-fix-$(date +%Y%m%d-%H%M%S).log"
exec > >(tee -a "$LOG") 2>&1

echo "[1/4] Detect installed version"
if command -v dpkg >/dev/null; then
    dpkg -s web-audio-recorder-js 2>/dev/null | grep -i ^Version || echo "web-audio-recorder-js not installed via dpkg"
elif command -v rpm >/dev/null; then
    rpm -q web-audio-recorder-js || echo "web-audio-recorder-js not installed via rpm"
fi

echo "[2/4] Backup configuration"
BACKUP="/root/backup-cve-2026-2964-$(date +%Y%m%d)"
mkdir -p "$BACKUP"
for d in /etc/web-audio-recorder-js /etc/web-audio-recorder-js.d /etc/web-audio-recorder-js.conf; do
    [ -e "$d" ] && cp -a "$d" "$BACKUP/" || true
done

echo "[3/4] Apply the upgrade (target: See vendor advisory)"
if command -v apt-get >/dev/null; then
    apt-get update
    apt-get install --only-upgrade -y web-audio-recorder-js
elif command -v dnf >/dev/null; then
    dnf upgrade --refresh -y web-audio-recorder-js
elif command -v yum >/dev/null; then
    yum update -y web-audio-recorder-js
elif command -v zypper >/dev/null; then
    zypper --non-interactive update web-audio-recorder-js
fi

echo "[4/4] Verify the patched build"
if command -v dpkg >/dev/null; then
    dpkg -s web-audio-recorder-js 2>/dev/null | grep -i ^Version
elif command -v rpm >/dev/null; then
    rpm -q web-audio-recorder-js
fi
echo "Done. Restart any service that loaded the old library."

If you can't patch immediately

Apply at least one of the following inline controls until you can deploy the patched build. None replace the upgrade.

Restrict exposure with nftables (Linux)

# Allow only trusted CIDR to reach the affected service ports
sudo nft add table inet filter 2>/dev/null || true
sudo nft 'add chain inet filter input { type filter hook input priority 0 ; }' 2>/dev/null || true
sudo nft 'add rule inet filter input tcp dport {80, 443} ip saddr != 10.0.0.0/8 drop'
sudo nft list ruleset

Block at the host firewall (Windows)

New-NetFirewallRule -DisplayName "Block-CVE-2026-2964" -Direction Inbound -Action Block -Protocol TCP -LocalPort 80,443 -RemoteAddress Any -Enabled True
Get-NetFirewallRule -DisplayName "Block-CVE-2026-2964"

Disable the affected service (Linux)

sudo systemctl stop web-audio-recorder-js 2>/dev/null || true
sudo systemctl disable web-audio-recorder-js 2>/dev/null || true

If the vendor advisory lists an official workaround, prefer that wording verbatim. If no workaround is published, the only safe remediation is the patch.

How to verify the fix worked

After upgrading, confirm the installed version matches the patched build and that no old library is still loaded by a long-running process.

# Linux
dpkg -s web-audio-recorder-js 2>/dev/null | grep -i ^Version
rpm -q web-audio-recorder-js 2>/dev/null || true
# Pid map check for old library handles
sudo lsof +c0 2>/dev/null | grep -i "DEL.*lib" || true

# Windows
Get-Package -Name "*web-audio-recorder-js*" | Select-Object Name, Version
Get-HotFix | Sort-Object InstalledOn -Descending | Select-Object -First 5

Expected: the reported version is at or above See vendor advisory. Restart the affected service (systemctl restart <service> on Linux, or restart the Windows service) so it loads the patched binary.

Frequently asked questions

Related fixes

Other vulnerabilities in the same area that are worth patching alongside this one:

• How to Fix CVE-2026-27468: Missing authorization in mastodon — Missing authorization in mastodon
• How to Fix CVE-2026-26883: Sql injection in n/a — Sql injection in n/a
• How to Fix CVE-2026-32740: Command Injection in libheif , Command Injection in libheif
• How to Fix CVE-2026-2113: Deserialization RCE in tpadmin , Deserialization RCE in tpadmin
• How to Fix CVE-2026-33804: Cwe-436: interpretation conflict in @fastify/middie , Cwe-436: interpretation conflict in @fastify/middie

Is CVE-2026-2964 actively exploited?

There is no public confirmation of exploitation in the wild listed in CISA KEV at the time of this writing. Patch anyway. Public exploits commonly follow disclosure within weeks.

Do I need to reboot after patching CVE-2026-2964?

For kernel and OS-level updates, yes. For most userland packages a systemctl restart <service> is enough on Linux, and restarting the Windows service or app on Windows. Any process that loaded the old library keeps using it until restarted.

What is the CVSS score for CVE-2026-2964?

2.3 (Low). Vector: CVSS:4.0/AV:N/AC:H/AT:N/PR:L/UI:N/VC:L/VI:L/VA:L/SC:N/SI:N/SA:N/E:P.

Where is the official advisory for CVE-2026-2964?

The vendor advisory is at https://vuldb.com/?id.347331. The NVD record is at https://nvd.nist.gov/vuln/detail/CVE-2026-2964.

References

• Official vendor advisory: https://vuldb.com/?id.347331
• NVD: https://nvd.nist.gov/vuln/detail/CVE-2026-2964
• CISA KEV catalog: https://www.cisa.gov/known-exploited-vulnerabilities-catalog
• Additional reference: https://vuldb.com/?ctiid.347331
• Additional reference: https://vuldb.com/?submit.755221

*Written by Sai Kiran Pandrala. Assembled from the official vendor advisory, NVD record, and CISA KEV listing on 2026-05-25. Always confirm against the vendor's advisory before applying changes in production.*