How to Fix CVE-2026-31550: pmdomain: bcm: bcm2835-power: Increase ASB control timeout in Linux

By Sai Kiran Pandrala

Related fixes

Other vulnerabilities in the same area that are worth patching alongside this one:

• How to Fix CVE-2026-23422: Linux (Bundle Sibling) — Linux (Bundle Sibling)
• How to Fix CVE-2026-43271: Race Condition in Linux — Race Condition in Linux
• How to Fix CVE-2026-43468: Security Vulnerability in Linux , Security Vulnerability in Linux
• How to Fix CVE-2026-31758: usb: usbtmc: Flush anchored URBs in Linux , usb: usbtmc: Flush anchored URBs in Linux
• How to Fix CVE-2026-43427: Security Vulnerability in Linux , Security Vulnerability in Linux

Last verified: 2026-05-25

CVE-2026-31550 is a pmdomain: bcm: bcm2835-power: increase asb control timeout in Linux Linux. Fix it by upgrading to 5.10.253, 5.15.203, 6.1.167, 6.6.130, 6.12.78, 6.18.20.

What is CVE-2026-31550?

CVE-2026-31550 is a pmdomain: bcm: bcm2835-power: increase asb control timeout flaw in Linux Linux. The vendor has not published a verified CVSS metric at the time of writing. It is not currently listed in the CISA Known Exploited Vulnerabilities catalog.

From the source record: In the Linux kernel, the following vulnerability has been resolved:

pmdomain: bcm: bcm2835-power: Increase ASB control timeout

The bcm2835_asb_control() function uses a tight polling loop to wait

for the ASB bridge to acknowledge a request. During intensive workloads,

this handshake intermittently fails for V3D's master ASB on BCM2711,

resulting in "Failed to disable ASB master for v3d" errors during

runtime PM suspend. As a consequence, the failed power-off leaves V3D in

a broken state, leading to bus faults or system hangs on later accesses.

As the timeout is insufficient in some scenarios, increase the polling

timeout from 1us to 5us, which is still negligible in the context of a

power domain transition. Also, replace the open-coded ktime_get_ns()/

cpu_relax() polling loop with readl_poll_timeout_atomic().

Why it matters in practice: The blast radius depends on how the affected service is exposed. An internet-facing instance with no compensating controls is the highest-risk configuration.

Am I affected?

You are affected if your installation of Linux matches a version listed in the Affected row above.

# Debian/Ubuntu
dpkg -s linux | grep Version
# RHEL/Rocky
rpm -q linux

How to fix CVE-2026-31550

Apply the vendor patch. Target the build named in the Fixed in row above (5.10.253, 5.15.203, 6.1.167, 6.6.130, 6.12.78, 6.18.20). The runnable command set below covers the most common deployment patterns for Linux.

Ubuntu / Debian

sudo apt-get update
sudo apt-get install --only-upgrade linux
dpkg -s linux | grep Version

RHEL / CentOS / Rocky

sudo dnf upgrade linux -y
rpm -q linux

After applying the patch

1. Restart the service or device so the patched binary loads.
2. Confirm the running version matches the Fixed in row using the verification command below.
3. Rotate credentials and API keys that the affected service could access if the asset was exposed during the disclosure window.

If you can't patch immediately

Until the patch lands, narrow the attack surface with these runnable controls.

Restrict network exposure

Block public access to the affected service at the perimeter. Allow only trusted source IPs.

# Linux iptables: only allow trusted admin subnet
sudo iptables -A INPUT -p tcp --dport 443 -s 10.10.10.0/24 -j ACCEPT
sudo iptables -A INPUT -p tcp --dport 443 -j DROP
sudo iptables-save | sudo tee /etc/iptables/rules.v4

# Windows firewall: only allow trusted admin subnet on management port
New-NetFirewallRule -DisplayName "Restrict-Mgmt-Allow" -Direction Inbound -Action Allow `
  -RemoteAddress 10.10.10.0/24 -Protocol TCP -LocalPort 443
New-NetFirewallRule -DisplayName "Restrict-Mgmt-Deny"  -Direction Inbound -Action Block `
  -Protocol TCP -LocalPort 443

Mitigations are temporary. Apply the vendor patch as soon as a maintenance window opens.

How to verify the fix worked

Confirm the patched build is the one actually running.

# Debian/Ubuntu
dpkg -s linux | grep Version
# RHEL/Rocky
rpm -q linux

Expected: a version at or above 5.10.253, 5.15.203, 6.1.167, 6.6.130, 6.12.78, 6.18.20.

Also worth doing: pull recent log windows for indicators of compromise listed in the vendor advisory, and re-run an authenticated vulnerability scan with up-to-date signatures.

Frequently asked questions

Is CVE-2026-31550 being exploited in the wild?

As of 2026-05-25, CVE-2026-31550 is not listed in the CISA Known Exploited Vulnerabilities catalog. Watch the catalog and patch on a normal cadence; KEV status can change as exploitation evidence emerges.

What is the CVSS score for CVE-2026-31550?

A verified CVSS score is not listed in the public record for CVE-2026-31550. Check the vendor advisory and the NVD page for an updated metric.

What version fixes this?

Upgrade to 5.10.253, 5.15.203, 6.1.167, 6.6.130, 6.12.78, 6.18.20.

Will a WAF or IDS rule alone close this?

No. Network filters cut down opportunistic scans but they do not remove the flaw. The vendor patch is the only durable fix.

References

• Official vendor advisory: https://git.kernel.org/stable/c/0e84e74849d2d7e9b23a09c2d5e0d9357db1ca59
• NVD entry: https://nvd.nist.gov/vuln/detail/CVE-2026-31550
• CISA KEV catalog: https://www.cisa.gov/known-exploited-vulnerabilities-catalog
• Additional reference: https://git.kernel.org/stable/c/c5e734f6a0740dce92e7c919e632cb43fa5d4e53
• Additional reference: https://git.kernel.org/stable/c/622ab02e955c35c125ff2b65d8327b2c52db8758
• Additional reference: https://git.kernel.org/stable/c/9443202d91388026dbf7312972a74fbfd27ee82f
• Additional reference: https://git.kernel.org/stable/c/ea4fa54b83bb2e4a21e9026824bfe271b1a6ee1e

*Assembled from the official vendor advisory, the NVD record, and the CISA KEV listing on 2026-05-25. Always confirm against the vendor advisory before applying changes in production.*