How to Fix CVE-2026-31583: media: em28xx: fix use-after-free in Linux

By Sai Kiran Pandrala

Related fixes

Other vulnerabilities in the same area that are worth patching alongside this one:

• How to Fix CVE-2026-31658: net: altera-tse: fix skb leak on DMA mapping error in Linux — net: altera-tse: fix skb leak on DMA mapping error in Linux
• How to Fix CVE-2026-31660: nfc: pn533: allocate rx skb before consuming bytes in Linux — nfc: pn533: allocate rx skb before consuming bytes in Linux
• How to Fix CVE-2026-23323: Critical Vulnerability in Linux , Critical Vulnerability in Linux
• How to Fix CVE-2026-43475: Security Vulnerability in Linux , Security Vulnerability in Linux
• How to Fix CVE-2026-23188: Critical Vulnerability in Linux , Critical Vulnerability in Linux

Last verified: 2026-05-25

CVE-2026-31583 is a media: em28xx: fix use-after-free in Linux Linux. Fix it by upgrading to 6.6.136, 6.12.83, 6.18.24, 6.19.14, 7.0.1, 7.1-rc1.

What is CVE-2026-31583?

CVE-2026-31583 is a media: em28xx: fix use-after-free flaw in Linux Linux. The vendor has not published a verified CVSS metric at the time of writing. It is not currently listed in the CISA Known Exploited Vulnerabilities catalog.

From the source record: In the Linux kernel, the following vulnerability has been resolved:

media: em28xx: fix use-after-free in em28xx_v4l2_open()

em28xx_v4l2_open() reads dev->v4l2 without holding dev->lock,

creating a race with em28xx_v4l2_init()'s error path and

em28xx_v4l2_fini(), both of which free the em28xx_v4l2 struct

and set dev->v4l2 to NULL under dev->lock.

This race leads to two issues:

- use-after-free in v4l2_fh_init() when accessing vdev->ctrl_handler,

since the video_device is embedded in the freed em28xx_v4l2 struct.

- NULL pointer dereference in em28xx_resolution_set() when accessing

v4l2->norm, since dev->v4l2 has been set to NULL.

Fix this by moving the mutex_lock() before the dev->v4l2 read and

adding a NULL check for dev->v4l2 under the lock.

Why it matters in practice: The blast radius depends on how the affected service is exposed. An internet-facing instance with no compensating controls is the highest-risk configuration.

Am I affected?

You are affected if your installation of Linux matches a version listed in the Affected row above.

# Debian/Ubuntu
dpkg -s linux | grep Version
# RHEL/Rocky
rpm -q linux

How to fix CVE-2026-31583

Apply the vendor patch. Target the build named in the Fixed in row above (6.6.136, 6.12.83, 6.18.24, 6.19.14, 7.0.1, 7.1-rc1). The runnable command set below covers the most common deployment patterns for Linux.

Ubuntu / Debian

sudo apt-get update
sudo apt-get install --only-upgrade linux
dpkg -s linux | grep Version

RHEL / CentOS / Rocky

sudo dnf upgrade linux -y
rpm -q linux

After applying the patch

1. Restart the service or device so the patched binary loads.
2. Confirm the running version matches the Fixed in row using the verification command below.
3. Rotate credentials and API keys that the affected service could access if the asset was exposed during the disclosure window.

If you can't patch immediately

Until the patch lands, narrow the attack surface with these runnable controls.

Restrict network exposure

Block public access to the affected service at the perimeter. Allow only trusted source IPs.

# Linux iptables: only allow trusted admin subnet
sudo iptables -A INPUT -p tcp --dport 443 -s 10.10.10.0/24 -j ACCEPT
sudo iptables -A INPUT -p tcp --dport 443 -j DROP
sudo iptables-save | sudo tee /etc/iptables/rules.v4

# Windows firewall: only allow trusted admin subnet on management port
New-NetFirewallRule -DisplayName "Restrict-Mgmt-Allow" -Direction Inbound -Action Allow `
  -RemoteAddress 10.10.10.0/24 -Protocol TCP -LocalPort 443
New-NetFirewallRule -DisplayName "Restrict-Mgmt-Deny"  -Direction Inbound -Action Block `
  -Protocol TCP -LocalPort 443

Mitigations are temporary. Apply the vendor patch as soon as a maintenance window opens.

How to verify the fix worked

Confirm the patched build is the one actually running.

# Debian/Ubuntu
dpkg -s linux | grep Version
# RHEL/Rocky
rpm -q linux

Expected: a version at or above 6.6.136, 6.12.83, 6.18.24, 6.19.14, 7.0.1, 7.1-rc1.

Also worth doing: pull recent log windows for indicators of compromise listed in the vendor advisory, and re-run an authenticated vulnerability scan with up-to-date signatures.

Frequently asked questions

Is CVE-2026-31583 being exploited in the wild?

As of 2026-05-25, CVE-2026-31583 is not listed in the CISA Known Exploited Vulnerabilities catalog. Watch the catalog and patch on a normal cadence; KEV status can change as exploitation evidence emerges.

What is the CVSS score for CVE-2026-31583?

A verified CVSS score is not listed in the public record for CVE-2026-31583. Check the vendor advisory and the NVD page for an updated metric.

What version fixes this?

Upgrade to 6.6.136, 6.12.83, 6.18.24, 6.19.14, 7.0.1, 7.1-rc1.

Will a WAF or IDS rule alone close this?

No. Network filters cut down opportunistic scans but they do not remove the flaw. The vendor patch is the only durable fix.

References

• Official vendor advisory: https://git.kernel.org/stable/c/b5d141ea15f173f15b9f0a72965902f3428c0d92
• NVD entry: https://nvd.nist.gov/vuln/detail/CVE-2026-31583
• CISA KEV catalog: https://www.cisa.gov/known-exploited-vulnerabilities-catalog
• Additional reference: https://git.kernel.org/stable/c/5fb2940327722b4684d2f964b54c1c90aa277324
• Additional reference: https://git.kernel.org/stable/c/871b8ea8ef39a6c253594649f4339378fad3d0dd
• Additional reference: https://git.kernel.org/stable/c/6b9e66437cc6123ddedac141e1b8b6fcf57d2972
• Additional reference: https://git.kernel.org/stable/c/dd2b888e08d3b3d6aacd65d76cd44fac11da750f

*Assembled from the official vendor advisory, the NVD record, and the CISA KEV listing on 2026-05-25. Always confirm against the vendor advisory before applying changes in production.*