⚠ Reference material — not professional advice. Test in staging, back up first, verify against your specific version. Use your own judgment for your environment.
● High · CVSS 7.5

How to Fix CVE-2026-31635: rxrpc: fix oversized RESPONSE authenticator length check in Linux

By Sai Kiran Pandrala

Other vulnerabilities in the same area that are worth patching alongside this one:

Last verified: 2026-05-25

CVE-2026-31635 is a rxrpc: fix oversized response authenticator length check in Linux Linux. Fix it by upgrading to 6.18.23, 6.19.13, 7.0.

⚡ At a glance
SeverityCVSS 7.5 - High
Actively exploited?Not currently in the CISA KEV catalog
AffectedLinux 9d1d2b59341f58126a69b51f9f5f8ccb9f12e54a up to (excluding) beee051f259acd286fed64c32c2b31e6f5097eb5; Linux 9d1d2b59341f58126a69b51f9f5f8ccb9f12e54a up to (excluding) e2f1a80d8b1ed6a5ae585a399c2b46500bdcc305; Linux 9d1d2b59341f58126a69b51f9f5f8ccb9f12e54a up to (excluding) a2567217ade970ecc458144b6be469bc015b23e5; Linux 6.16
Fixed in6.18.23, 6.19.13, 7.0
Type (CWE)Not verified

What is CVE-2026-31635?

CVE-2026-31635 is a rxrpc: fix oversized response authenticator length check flaw in Linux Linux. It carries a CVSS base score of 7.5 (high). It is not currently listed in the CISA Known Exploited Vulnerabilities catalog.

From the source record: In the Linux kernel, the following vulnerability has been resolved:

rxrpc: fix oversized RESPONSE authenticator length check

rxgk_verify_response() decodes auth_len from the packet and is supposed

to verify that it fits in the remaining bytes. The existing check is

inverted, so oversized RESPONSE authenticators are accepted and passed

to rxgk_decrypt_skb(), which can later reach skb_to_sgvec() with an

impossible length and hit BUG_ON(len).

Decoded from the original latest-net reproduction logs with

scripts/decode_stacktrace.sh:

RIP: __skb_to_sgvec()

[net/core/skbuff.c:5285 (discriminator 1)]

Call Trace:

skb_to_sgvec() [net/core/skbuff.c:5305]

rxgk_decrypt_skb() [net/rxrpc/rxgk_common.h:81]

rxgk_verify_response() [net/rxrpc/rxgk.c:1268]

rxrpc_process_connection()

[net/rxrpc/conn_event.c:266 net/rxrpc/conn_event.c:364

net/rxrpc/conn_event.

Why it matters in practice: The blast radius depends on how the affected service is exposed. An internet-facing instance with no compensating controls is the highest-risk configuration.

Am I affected?

You are affected if your installation of Linux matches a version listed in the Affected row above.


# Debian/Ubuntu
dpkg -s linux | grep Version
# RHEL/Rocky
rpm -q linux

How to fix CVE-2026-31635

Apply the vendor patch. Target the build named in the Fixed in row above (6.18.23, 6.19.13, 7.0). The runnable command set below covers the most common deployment patterns for Linux.

Ubuntu / Debian


sudo apt-get update
sudo apt-get install --only-upgrade linux
dpkg -s linux | grep Version

RHEL / CentOS / Rocky


sudo dnf upgrade linux -y
rpm -q linux

After applying the patch

  1. Restart the service or device so the patched binary loads.
  2. Confirm the running version matches the Fixed in row using the verification command below.
  3. Rotate credentials and API keys that the affected service could access if the asset was exposed during the disclosure window.

If you can't patch immediately

Until the patch lands, narrow the attack surface with these runnable controls.

Restrict network exposure

Block public access to the affected service at the perimeter. Allow only trusted source IPs.


# Linux iptables: only allow trusted admin subnet
sudo iptables -A INPUT -p tcp --dport 443 -s 10.10.10.0/24 -j ACCEPT
sudo iptables -A INPUT -p tcp --dport 443 -j DROP
sudo iptables-save | sudo tee /etc/iptables/rules.v4


# Windows firewall: only allow trusted admin subnet on management port
New-NetFirewallRule -DisplayName "Restrict-Mgmt-Allow" -Direction Inbound -Action Allow `
  -RemoteAddress 10.10.10.0/24 -Protocol TCP -LocalPort 443
New-NetFirewallRule -DisplayName "Restrict-Mgmt-Deny"  -Direction Inbound -Action Block `
  -Protocol TCP -LocalPort 443

Mitigations are temporary. Apply the vendor patch as soon as a maintenance window opens.

How to verify the fix worked

Confirm the patched build is the one actually running.


# Debian/Ubuntu
dpkg -s linux | grep Version
# RHEL/Rocky
rpm -q linux

Expected: a version at or above 6.18.23, 6.19.13, 7.0.

Also worth doing: pull recent log windows for indicators of compromise listed in the vendor advisory, and re-run an authenticated vulnerability scan with up-to-date signatures.

Frequently asked questions

Is CVE-2026-31635 being exploited in the wild?

As of 2026-05-25, CVE-2026-31635 is not listed in the CISA Known Exploited Vulnerabilities catalog. Watch the catalog and patch on a normal cadence; KEV status can change as exploitation evidence emerges.

What is the CVSS score for CVE-2026-31635?

The CVSS base score is 7.5 (High).

What version fixes this?

Upgrade to 6.18.23, 6.19.13, 7.0.

Will a WAF or IDS rule alone close this?

No. Network filters cut down opportunistic scans but they do not remove the flaw. The vendor patch is the only durable fix.

References

*Assembled from the official vendor advisory, the NVD record, and the CISA KEV listing on 2026-05-25. Always confirm against the vendor advisory before applying changes in production.*