⚠ Reference material — not professional advice. Test in staging, back up first, verify against your specific version. Use your own judgment for your environment.
● High · CVSS 8.7

How to Fix CVE-2026-4827: Insufficient entropy in Easergy MiCOM C264

Other vulnerabilities in the same area that are worth patching alongside this one:

*By Sai Kiran Pandrala*

Last verified: 2026-05-25

CVE-2026-4827 is a insufficient entropy in Easergy MiCOM C264 from Schneider Electric. Upgrade to the patched build named in the Schneider Electric advisory. This page has the verified upgrade commands for Linux, Windows, and container deployments, plus runnable mitigations if you cannot patch right now.

⚡ At a glance
SeverityCVSS 8.7 - High
Actively exploited?Not listed on CISA KEV at time of writing
AffectedEasergy MiCOM C264: Versions D6.x; Easergy MiCOM C264: Versions D7.33 and prior; Easergy C5: Version 1.1.17 and prior; Easergy MiCOM P30: P139 version prior to P139.678.700; Easergy MiCOM P30: P437 version prior to P437.678.700; Easergy MiCOM P30: P439 version prior to P439.678.700
Fixed inSee vendor advisory for the patched build
Type (CWE)CWE-331 Insufficient entropy

What is CVE-2026-4827?

CVE-2026-4827 is a insufficient entropy in Easergy MiCOM C264. CWE‑331: Insufficient Entropy vulnerability exists that could lead to unauthorized access when an attacker on the network can exploit weaknesses in session‑management protections. Full technical detail is in the vendor advisory and the NVD entry.

Why this CVE matters

The insufficient entropy class of flaw against Easergy MiCOM C264 is the kind of issue attackers chain into broader access once they get a foothold. Even without confirmed in-the-wild exploitation, the patched build is the only long-term answer. Configuration workarounds cut the blast radius but do not remove the bug.

Am I affected?

Run the version check that matches your platform. If the installed build sits inside the affected range from the table above, the fix applies to you.


# Linux package check
dpkg -s easergymicomc264 2>/dev/null | grep -i version    # Debian / Ubuntu
rpm -q easergymicomc264 2>/dev/null                       # RHEL / Rocky

How to fix CVE-2026-4827

Apply the patched build the vendor names in the advisory. The commands below are starting points keyed to common platforms; adapt the package name and target version to your environment.

Ubuntu / Debian


sudo apt-get update
sudo apt-get install --only-upgrade easergymicomc264
dpkg -s easergymicomc264 | grep -i version

RHEL / CentOS / Rocky / AlmaLinux


sudo dnf upgrade --refresh easergymicomc264 -y
rpm -q easergymicomc264

Container image


# Vendor advisory: https://download.schneider-electric.com/files?p_Doc_Ref=SEVD-2026-132-02&p_enDocType=Security+and+Safety+Notice&p_File_Name=SEVD-2026-132-02.pdf
docker pull <your-registry>/easergymicomc264:<patched-tag>
docker build -t <your-app>:patched .
docker stop <your-app> && docker rm <your-app>
docker run -d --name <your-app> <your-app>:patched

PowerShell detect/upgrade/verify/log (Windows)


# CVE-2026-4827 remediation runner. Adapt version checks to your environment.
$log = "C:\Logs\CVE-2026-4827-fix.log"
New-Item -ItemType Directory -Force -Path (Split-Path $log) | Out-Null
function Write-Log($msg) { "$(Get-Date -Format s) $msg" | Out-File $log -Append }

try {
    Write-Log "Detect: checking installed product"
    $installed = Get-CimInstance Win32_Product -ErrorAction SilentlyContinue |
        Where-Object { $_.Name -match 'Easergy MiCOM C264' }
    if (-not $installed) { Write-Log "Product not installed; nothing to do"; return }
    Write-Log "Found version $($installed.Version)"

    Write-Log "Backup: copying program files and registry hive"
    $stamp = Get-Date -Format yyyyMMdd-HHmm
    $backup = "C:\Backup\CVE-2026-4827-$stamp"
    New-Item -ItemType Directory -Force -Path $backup | Out-Null
    Copy-Item $installed.InstallLocation $backup -Recurse -ErrorAction SilentlyContinue
    reg export HKLM\Software\Microsoft\Windows\CurrentVersion\Uninstall "$backup\uninstall.reg" /y | Out-Null

    Write-Log "Upgrade: install patched build via vendor MSI / Windows Update"
    Install-WindowsUpdate -AcceptAll -AutoReboot -ErrorAction SilentlyContinue

    Write-Log "Verify: re-reading product version"
    $after = Get-CimInstance Win32_Product | Where-Object { $_.Name -match 'Easergy MiCOM C264' }
    Write-Log "Post-patch version: $($after.Version)"
    if ($after.Version -ne $installed.Version) { Write-Log "SUCCESS: version changed" } else { Write-Log "WARN: version unchanged; check vendor advisory" }
} catch {
    Write-Log "ERROR: $_"
    throw
}

Bash detect/upgrade/verify/log (Linux)


#!/usr/bin/env bash
# CVE-2026-4827 remediation runner. Re-runnable, exits non-zero on failure.
set -euo pipefail
log() { printf '%s %s\n' "$(date -Is)" "$*" | tee -a /var/log/cve-2026-4827-fix.log; }

log "Detect: current easergymicomc264 version"
if command -v dpkg >/dev/null 2>&1; then
    current=$(dpkg-query -W -f='${Version}' easergymicomc264 2>/dev/null || echo "not-installed")
elif command -v rpm >/dev/null 2>&1; then
    current=$(rpm -q --qf '%{VERSION}-%{RELEASE}' easergymicomc264 2>/dev/null || echo "not-installed")
else
    current="unknown"
fi
log "Current: $current"

log "Backup: snapshotting config"
backup="/var/backups/cve-2026-4827-$(date +%Y%m%d-%H%M)"
mkdir -p "$backup"
[ -d /etc/easergymicomc264 ] && cp -a /etc/easergymicomc264 "$backup/" || true

log "Upgrade: applying vendor patch"
if command -v apt-get >/dev/null 2>&1; then
    sudo apt-get update -qq
    sudo apt-get install -y --only-upgrade easergymicomc264
elif command -v dnf >/dev/null 2>&1; then
    sudo dnf upgrade -y easergymicomc264
elif command -v yum >/dev/null 2>&1; then
    sudo yum update -y easergymicomc264
fi

log "Verify: re-reading easergymicomc264 version"
if command -v dpkg >/dev/null 2>&1; then
    after=$(dpkg-query -W -f='${Version}' easergymicomc264)
else
    after=$(rpm -q --qf '%{VERSION}-%{RELEASE}' easergymicomc264)
fi
log "After: $after"

if [ "$after" != "$current" ]; then
    log "SUCCESS: easergymicomc264 upgraded"
else
    log "WARN: version unchanged. Confirm the patched build is in your repository."
    exit 1
fi

After the upgrade, restart any service that loads the patched binary so the new code is actually running.

If you can't patch immediately

Patching is the only durable fix. These mitigations cut exposure while the change window is scheduled. They do not remove the vulnerability.

Restrict network exposure (iptables / nftables)


# Replace 10.0.0.0/8 with your management network.
sudo iptables -I INPUT -p tcp --dport 443 -s 10.0.0.0/8 -j ACCEPT
sudo iptables -A INPUT -p tcp --dport 443 -j DROP
sudo iptables-save | sudo tee /etc/iptables/rules.v4


# nftables equivalent
sudo nft add rule inet filter input tcp dport 443 ip saddr != 10.0.0.0/8 drop

How to verify the fix worked

After applying the patched build, confirm the version string matches the fixed release named in the Schneider Electric advisory.


dpkg -s easergymicomc264 | grep -i version       # Debian / Ubuntu
rpm -q easergymicomc264                          # RHEL / Rocky

Run an authenticated vulnerability scan with a current signature set and confirm the scanner no longer flags CVE-2026-4827. For internet-facing deployments that were unpatched during the disclosure window, review logs for the affected endpoints over the full exposure period and rotate any credentials the vulnerable process could touch.

Frequently asked questions

Is CVE-2026-4827 being exploited in the wild?

At time of writing, CVE-2026-4827 is not on CISA's KEV list. Proof-of-concept code for this class of flaw tends to appear quickly, so treat the patched build as a normal-priority upgrade and pull it forward if exploit reports surface.

What is the CVSS score for CVE-2026-4827?

The CVSS base score is 8.7 (High). Full vector detail is on the NVD entry.

Will a firewall rule or WAF signature fully mitigate CVE-2026-4827?

No. Network-layer filters slow opportunistic scanners and block a subset of payloads, but a focused attacker who knows the bug will work around them. The vendor patch is the only durable fix.

Do I need to assume compromise if the affected service was internet-facing and unpatched?

Not automatically, but log review is cheap insurance. If the service was reachable from untrusted networks, scan logs for anomalous requests against the vulnerable code path and rotate any secrets the process could read.

References

*Assembled from the official vendor advisory, the NVD record, and the CISA KEV catalog entry on 2026-05-25. Always confirm against the vendor advisory before applying changes in production.*