Location on Dark Sky Weather, what causes it and how to fix

By Sai Kiran Pandrala · Last verified: 2026-05-31 · Source: community Q&A, Apple Support docs, Apple Communities (discussions.apple.com)

When Location on Dark Sky Weather, what causes it and how to fix bites you on Dark Sky and Apple Weather WeatherKit, the first instinct is to open a ticket. Most of the time you do not have to. The steps below are the ones Apple Support and Apple Business / Enterprise Support would walk you through on the call.

What location on dark sky weather, what causes it and how to fix actually involves on Dark Sky and Apple Weather WeatherKit

The Location error from AWS typically surfaces with the message "services off for Weather". The error code itself is what you grep for in AWS re:Post or in AWS Support cases, not the human-readable line.

On Dark Sky Weather, this most often comes from one of three causes: a missing or restrictive IAM permission, a service-level limit you have hit, or a transient AWS-side capacity issue. The fix path differs by which.

The rest of this page is the structured fix path. Start with diagnose, then remediation, then the automation options so you do not have to do this by hand the next time it surfaces. Verify and safety sections at the end are the discipline that keeps the fix from regressing in production.

Signal review

Look at the Jamf Pro change management entry or Apple Business Manager audit event for the failed call, even if you are not enrolled in macOS unified logging and iOS sysdiagnose Log Router. The basic 90-day event history works for most diagnostic purposes and lives in the console under Jamf Pro change management log and Apple Business Manager audit log > Event history. Filter by event name (the API action) and time range; the event JSON shows the exact user identity, source IP, request parameters, and error code.

Diff against last known good. The last config change you made is the cause about three quarters of the time, even when the change should not have mattered. Use Jamf inventory history and Time Machine snapshots (or your Terraform / Deployment Manager or Terraform drift report) to see the actual delta between the resource state when it worked and when it broke. The change you remember is often not the only change that happened.

Reproduce the failure with the Terminal commands (defaults, plistbuddy, killall, sudo, system_profiler) and Apple Configurator 2 / Jamf APIs / MDM commands in --debug mode. The full SigV4 request payload it emits, plus the exact endpoint URL it resolved to, is what Apple Support and Apple Business / Enterprise Support uses to verify policy, region, or parameter issues without you having to share IAM credentials. Save the debug output to a file with ... --debug 2> debug.log and you can search it for the failed aws.request entry.

Solution-focused remediation path

If the issue points at IAM, do not start by adding * to a policy. Use macOS Console + Jamf Pro logs + Profile Manager check against the failed action to see the minimum scope. Adding * is the fastest way to fail your next Apple Platform Security review, and it usually does not even fix the issue because the explicit deny is often coming from a higher level (Org Policy, RCP, or permission boundary), not a missing allow.

If networking is suspect, use Apple Wireless Diagnostics + Network Utility (or 'networkQuality' on macOS). It is the only tool that simulates the full ENI-to-ENI path including macOS PF firewall, Application Firewall, system extensions, and Content Filter in one call. Manual trace is slower and misses transitive issues. The analyzer charges $0.10 per analysis - cheaper than a 30-minute call with your network team.

If quotas are suspect, the Apple Business Manager Settings > Manage Devices console shows current usage and the active limit side by side. Request increases through Apple Business Manager Settings > Manage Devices, not through Support tickets - quota dashboard requests usually approve faster (often within minutes for soft limits) and they are auditable in Jamf Pro change management log and Apple Business Manager audit log. Set up Apple Business Manager Settings > Manage Devices + Jamf Pro Smart Group + Webhooks at 80 percent usage so you get notified before you hit the wall.

Automate this fix so you do not do it twice

Build a Self Service item with manual approval for risky fixes

For multi-step fixes that include a destructive action (Reset NVRAM, delete keychain, erase user data), publish the fix as a Self Service item in Jamf Pro or Kandji. The user clicks one button, the script runs, a notification confirms success. Couple it with a Jamf Pro approval workflow if your security model requires a second-person sign-off before any destructive step runs. The audit trail lives in the MDM change log with the requester and approver identity attached.

Add a Smart Group + webhook so you catch the next occurrence

The cheapest way to never see the same incident twice is a Jamf Pro Smart Group that watches for the symptom (specific extension attribute value, specific OS version, specific app build) and fires a webhook into Slack, PagerDuty, or a Jamf-API-driven Lambda when the count drifts above your normal baseline. For Dark Sky and Apple Weather WeatherKit, the relevant extension attributes live under script-evaluated checks - defaults read outputs, system_profiler values, or a log show grep against macOS unified logging. Set thresholds against observed normal, not against round numbers.

Automate the fix in Terminal with defaults, plistbuddy, and system_profiler

On macOS, the most reliable repair primitives are the built-in Terminal tools. defaults read reveals the current preference state, defaults write changes it, and killall cfprefsd forces the preferences daemon to flush so the new value actually takes effect. /usr/libexec/PlistBuddy handles structured plist edits when defaults is not enough. For hardware and inventory checks, system_profiler with the right datatype is the canonical read; for example SPHardwareDataType, SPNetworkDataType, or SPInstallHistoryDataType.

# Template - replace with your actual key path
defaults read com.apple.dark 2>/dev/null | head
sudo killall cfprefsd
/usr/libexec/PlistBuddy -c 'Print' ~/Library/Preferences/com.apple.dark.plist
system_profiler SPHardwareDataType -json | head -40

Things that bite

The most common pitfall when fixing this on Dark Sky and Apple Weather WeatherKit is treating it as a one-off rather than as a recurring class of incident. The same misconfiguration tends to happen again after a deployment, a role rotation, or a region migration unless the fix is codified. Add a Apple Configuration Profile restriction payload, Organization Policy condition, or Apple Configuration Profile or MDM restriction payload that prevents the same misconfig from being introduced again. Documentation alone does not survive turnover.

Another common trap: confirming the fix on a single resource and assuming the fleet is healthy. Loop your check across every account, region, and IAM principal that could exhibit the same symptom. If you cannot enumerate the affected scope without a script, you do not yet understand the scope.

Repair sequence

• Watch for 24 to 48 hours. Activity Monitor + macOS unified logging + Jamf inventory reports can mask issues with cached health for 6 to 12 hours, especially Cloud CDN and Cloud DNS.
• Capture the new state in a runbook so the next person on call does not have to rediscover this. Push it to Confluence or your team wiki, not into Slack.

Safety, rollback, blast radius

• Test in a non-production account if your environment has Resource Manager and Organization Policy or Cloud Resource Manager (organizations, folders, projects). The cost of one sandbox account is cheaper than one rollback meeting.
• Export the existing config before changing it. Most Dark Sky and Apple Weather WeatherKit resources support describe + export to JSON via CLI - capture that to source control before you start.
• Maintenance window discipline: if the change touches DNS, certificate rotation, or anything that emits TLS handshakes, line up a window with stakeholder notification, not a heroic mid-day swap.

FAQ

Related fixes

Related guides worth a look while you sort this one out:

• Unable on Dark Sky Weather, what causes it and how to fix
• Weather on Dark Sky Weather: what causes it and how to fix
• Weather app inaccurate temperature for location
• Dark Sky API shut down 2022 migration to WeatherKit
• Hyperlocal precipitation accuracy expectations
• Severe weather alerts missing for region