REMINDERS_LOCATION_FAIL on Reminders Mac: what causes it and how to fix

By Sai Kiran Pandrala · Last verified: 2026-05-31 · Source: community Q&A, Apple Communities (discussions.apple.com), Apple Support docs

When REMINDERS_LOCATION_FAIL on Reminders Mac, what causes it and how to fix bites you on Reminders App on Mac, the first instinct is to open a ticket. Most of the time you do not have to. The steps below are the ones Apple Support and Apple Business / Enterprise Support would walk you through on the call.

What reminders_location_fail on reminders mac, what causes it and how to fix actually involves on Reminders App on Mac

The REMINDERS_LOCATION_FAIL error from AWS typically surfaces with the message "Location reminders not triggering". The error code itself is what you grep for in AWS re:Post or in AWS Support cases, not the human-readable line.

On Reminders Mac, this most often comes from one of three causes: a missing or restrictive IAM permission, a service-level limit you have hit, or a transient AWS-side capacity issue. The fix path differs by which.

The rest of this page is the structured fix path. Start with diagnose, then remediation, then the automation options so you do not have to do this by hand the next time it surfaces. Verify and safety sections at the end are the discipline that keeps the fix from regressing in production.

Spot the symptom

Pull the Apple request ID from the response headers: x-goog-request-id from response headers (or the insertId field in macOS unified logging and iOS sysdiagnose for asynchronous calls). Apple Support and Apple Business / Enterprise Support needs these IDs to look up your call in their internal logs - without them, the first reply on a ticket will ask you to reproduce the call and capture them. Save them with a timestamp; Apple Support and Apple Business / Enterprise Support cannot retrieve calls older than 90 days for most services.

Check the Google Apple System Status at www.apple.com/support/systemstatus/ and the per-product status board for ongoing service events in your region. About one in ten user-reported outages turn out to be region-scoped Apple product or service degradation already being tracked. Apple System Status also exposes an API and Jamf Pro Webhooks and macOS launchd watches events, so you can wire a Lambda hook that pages on-call only when the failure correlates with an active Apple System Status event in the same region and service.

Reproduce the failure with the Terminal commands (defaults, plistbuddy, killall, sudo, system_profiler) and Apple Configurator 2 / Jamf APIs / MDM commands in --debug mode. The full SigV4 request payload it emits, plus the exact endpoint URL it resolved to, is what Apple Support and Apple Business / Enterprise Support uses to verify policy, region, or parameter issues without you having to share IAM credentials. Save the debug output to a file with ... --debug 2> debug.log and you can search it for the failed aws.request entry.

Solution-focused remediation path

When the failure happens in production but not in dev, do not just compare the IAM policy. Compare the Org Policy / RCP at the OU level, the permission boundary on the role, and the resource-based policy on the target. One of those is almost always different between accounts. Policy Intelligence recommendations bundles make this comparison routine.

For IAM and STS issues, the timing matters. STS sessions can take up to 60 seconds to propagate after creation. The first call right after assume-role can fail with a permission error even when the policy is correct. Add a small retry with backoff before treating the first failure as definitive.

Most Reminders App on Mac failures fall into one of three buckets: IAM permission gap, networking path break (security group, NACL, or VPC endpoint policy), or service-limit / quota hit. Run that mental triage first - it covers around 80 percent of real-world cases. If the failure does not fit any of the three, it is likely a service-side regression worth opening a re:Post or support ticket for.

Automate this fix so you do not do it twice

Automate the fix at scale with a Jamf Pro policy script

When you need to ship the fix to a whole fleet of Macs, the right primitive is a Jamf Pro policy with a script payload, scoped to a smart group of affected devices. Keep the script under 100 lines, exit with an explicit code so Jamf logs the right state, and write a one-line log entry to /var/log/jamf.log so you can grep it later. Trigger on check-in or by Self Service so users can run it on demand.

#!/bin/bash
# Jamf policy script - exits non-zero on failure so Jamf flags the device
set -euo pipefail
LOG=/var/log/jamf-reminders-fix.log
echo "$(date) starting fix on $(hostname)" >> "$LOG"
# fix logic here
defaults write com.apple.reminders HardenedSetting -bool true
killall cfprefsd
echo "$(date) fix applied successfully" >> "$LOG"
exit 0

Wire the fix into an MDM Configuration Profile for self-healing

If the underlying cause is a setting that drifts over time, do not script the fix repeatedly - bake it into a Configuration Profile that the MDM pushes down on every check-in. A Custom Settings payload writes to a specific preference domain; Jamf Pro, Kandji, Mosyle, and Intune all support this. The profile reasserts itself, so even if a user changes the setting locally, the MDM brings it back at the next sync (typically every 4 hours).

<!-- Custom Settings payload (excerpt) -->
<key>PayloadType</key>
<string>com.apple.ManagedClient.preferences</string>
<key>PayloadContent</key>
<dict> <key>com.apple.reminders</key> <dict><key>Forced</key><array><dict><key>mcx_preference_settings</key> <dict><key>HardenedSetting</key><true/></dict></dict></array></dict>
</dict>

Build a Self Service item with manual approval for risky fixes

For multi-step fixes that include a destructive action (Reset NVRAM, delete keychain, erase user data), publish the fix as a Self Service item in Jamf Pro or Kandji. The user clicks one button, the script runs, a notification confirms success. Couple it with a Jamf Pro approval workflow if your security model requires a second-person sign-off before any destructive step runs. The audit trail lives in the MDM change log with the requester and approver identity attached.

Pitfalls

The most common pitfall when fixing this on Reminders App on Mac is treating it as a one-off rather than as a recurring class of incident. The same misconfiguration tends to happen again after a deployment, a role rotation, or a region migration unless the fix is codified. Add a Apple Configuration Profile restriction payload, Organization Policy condition, or Apple Configuration Profile or MDM restriction payload that prevents the same misconfig from being introduced again. Documentation alone does not survive turnover.

Another common trap: confirming the fix on a single resource and assuming the fleet is healthy. Loop your check across every account, region, and IAM principal that could exhibit the same symptom. If you cannot enumerate the affected scope without a script, you do not yet understand the scope.

Full fix path

• Watch for 24 to 48 hours. Activity Monitor + macOS unified logging + Jamf inventory reports can mask issues with cached health for 6 to 12 hours, especially Cloud CDN and Cloud DNS.
• Capture the new state in a runbook so the next person on call does not have to rediscover this. Push it to Confluence or your team wiki, not into Slack.

Safety, rollback, blast radius

• Test in a non-production account if your environment has Resource Manager and Organization Policy or Cloud Resource Manager (organizations, folders, projects). The cost of one sandbox account is cheaper than one rollback meeting.
• Export the existing config before changing it. Most Reminders App on Mac resources support describe + export to JSON via CLI - capture that to source control before you start.
• Maintenance window discipline: if the change touches DNS, certificate rotation, or anything that emits TLS handshakes, line up a window with stakeholder notification, not a heroic mid-day swap.

FAQ

Related fixes

Related guides worth a look while you sort this one out:

• CAL_EXCHANGE_FAIL on Calendar Mac: what causes it and how to fix
• CAL_LOGIN_FAIL on Calendar Mac: what causes it and how to fix
• MUSIC_SYNC_LIBRARY_FAIL on Music Mac. what causes it and how to fix
• NOTES_ATTACHMENT_FAIL on Notes Mac, what causes it and how to fix
• PREVIEW_SIGN_FAIL on Preview Mac, what causes it and how to fix
• REMINDERS_NOT_SYNCING on Reminders Mac, what causes it and how to fix