Configure custom error pages so users do not see XML errors

By Sai Kiran Pandrala · Last verified: 2026-05-31 · Source: AWS re:Post, community Q&A, AWS docs

Engineers running Amazon CloudFront hit Configure custom error pages so users do not see XML errors often enough that there is a stable fix pattern. This page captures it in the order AWS support would run it during a real incident.

What configure custom error pages so users do not see xml errors actually involves on Amazon CloudFront

This task on Amazon CloudFront is one of the more searched operational topics on AWS in the last 12 months. The procedure below is the path that works in a current AWS account with default IAM and standard VPC config.

The rest of this page is the structured fix path. Start with diagnose, then remediation, then the automation options so you do not have to do this by hand the next time it surfaces. Verify and safety sections at the end are the discipline that keeps the fix from regressing in production.

What you'll see

Run aws sts get-caller-identity first. About one in five 'why does this not work' tickets are actually 'I am in the wrong account' or 'my session expired and the SDK is using stale creds'. The 5-second sanity check costs nothing and saves real time when the answer is that simple.

Check the AWS Health Dashboard at health.aws.amazon.com for ongoing service events in your region. About one in ten user-reported outages turn out to be region-scoped AWS service degradation already being tracked. AWS Health also exposes an API and EventBridge events, so you can wire a Lambda hook that pages on-call only when the failure correlates with an active AWS Health event in the same region and service.

Diff against last known good. The last config change you made is the cause about three quarters of the time, even when the change should not have mattered. Use AWS Config history (or your Terraform / CloudFormation drift report) to see the actual delta between the resource state when it worked and when it broke. The change you remember is often not the only change that happened.

Solution-focused remediation path

Most Amazon CloudFront failures fall into one of three buckets: IAM permission gap, networking path break (security group, NACL, or VPC endpoint policy), or service-limit / quota hit. Run that mental triage first - it covers around 80 percent of real-world cases. If the failure does not fit any of the three, it is likely a service-side regression worth opening a re:Post or support ticket for.

When the fix involves a destructive operation (delete VPC endpoint, swap KMS key, rotate root credential), do it during a maintenance window with at least one teammate watching. Several Amazon CloudFront operations have implicit dependencies that only show up when traffic starts flowing again. Document the rollback path before you start, not during the incident.

If you cannot reproduce the failure consistently, the cause is probably a race condition or a session-cache issue. Run the call with --profile set to a fresh STS session, in a different region you control, with a single concurrent request. If it works there but fails in your normal setup, the difference is the bug.

Automate this fix so you do not do it twice

Codify the fix in Terraform or CloudFormation

When you reach for the console to fix the same issue twice, the third occurrence should be solved in IaC, not in the console. Terraform's terraform import and CloudFormation's resource importer let you adopt the existing resource into state without recreating it. Lock the corrected attribute behind a variable so the next operator does not have to rediscover the value. Add a moved {} block or CloudFormation resource refactor to keep the diff clean.

Automate the fix with Python and boto3

For anything you do more than twice, write a small Python script. The boto3 pattern below uses paginators (so it does not blow up on accounts with thousands of resources), explicit region binding, and a dry-run flag that defaults to True. Keep the script under 100 lines; if it grows beyond that, you are building a tool and should put it behind a Lambda with proper logging.

import boto3, sys
DRY_RUN = '--apply' not in sys.argv
client = boto3.client('cloudfront', region_name='us-east-1')
paginator = client.get_paginator('describe_...')
for page in paginator.paginate(): for item in page.get('Items', []): if item.get('Status') == 'FAILED': if DRY_RUN: print(f'[dry-run] would fix {item["Id"]}') else: client.modify_...(ResourceId=item['Id']) print(f'fixed {item["Id"]}')

Automate the fix with the AWS CLI

The CLI one-liner pattern for Amazon CloudFront operations is roughly: aws cloudfront describe-... --query ... to read state, aws cloudfront modify-... --no-dry-run to apply the change, and aws cloudfront describe-... --query ... again to verify. Wrap it in a shell script that sets a region variable at the top and exits on first error with set -euo pipefail so a partial run does not leave the account in a half-fixed state.

# Template - replace placeholders with your account specifics
export AWS_REGION=us-east-1
export AWS_PROFILE=prod
aws cloudfront describe-... --query 'Resources[?Status==`FAILED`].[Id,Reason]' --output table
aws cloudfront modify-... --resource-id RESOURCE_ID --no-dry-run
aws cloudfront describe-... --resource-id RESOURCE_ID --query 'Status'

Common traps

The pitfall most teams hit on Amazon CloudFront is moving too fast and skipping the read-only validation step. Before any write, list the current state and save it. AWS APIs are eventually consistent for many resource types, so the validation snapshot is your only reliable reference if you need to undo. Save the output of the describe call to S3, not to your laptop.

Second pitfall: confusing IAM permission errors with networking errors. AccessDenied can be IAM (policy missing), networking (VPC endpoint policy blocking the call), or KMS (key policy missing). The error string looks identical for all three. Distinguish by looking at the CloudTrail event's errorCode and the encoded authorization message; do not assume IAM is the culprit just because the message says AccessDenied.

The repair

• Reproduce the original symptom path. If it still surfaces in any account or region or IAM role, you have not fixed it.
• Watch for 24 to 48 hours. AWS metrics and policy systems can mask issues with cached health for 6 to 12 hours, especially CloudFront and Route 53.
• Run a smoke test under realistic load. Happy-path tests miss race conditions and IAM session-cache issues.
• Capture the new state in a runbook so the next person on call does not have to rediscover this. Push it to Confluence or your team wiki, not into Slack.
• If the fix involved a permission change, run IAM Access Analyzer one more time to confirm you did not open a separate hole while closing this one.

Safety, rollback, blast radius

• Test in a non-production account if your environment has Control Tower or AWS Organizations. The cost of one sandbox account is cheaper than one rollback meeting.
• Export the existing config before changing it. Most Amazon CloudFront resources support describe + export to JSON via CLI - capture that to source control before you start.
• Know your rollback path. Some Amazon CloudFront operations are one-way (region migration, account-level feature opt-in, KMS key deletion past pending window). Confirm reversibility on the AWS doc before you commit.
• Be aware of cross-service impact. IAM role changes ripple to every service trusting that role. KMS key changes break every workload depending on that key. VPC endpoint changes affect every VPC consumer of that endpoint.
• Maintenance window discipline: if the change touches DNS, certificate rotation, or anything that emits TLS handshakes, line up a window with stakeholder notification, not a heroic mid-day swap.

FAQ

Related fixes

Related guides worth a look while you sort this one out:

• CloudFront custom domain CNAMEAlreadyExists across accounts SSL cert verification
• API Gateway custom domain name with ACM in same region
• API Gateway custom request and response transformations using VTL templates
• Bedrock custom model import format unsupported
• ACM certificate not visible in CloudFront dropdown must be in us-east-1
• CloudFront 503 Service Unavailable SSL handshake or origin TLS version mismatch