CloudWatch Container Insights for EKS Fluent Bit

By Sai Kiran Pandrala · Last verified: 2026-05-31 · Source: community Q&A, AWS docs, AWS re:Post

CloudWatch Container Insights for EKS Fluent Bit on Amazon CloudWatch sits in the most-reported issues list across r/aws, AWS re:Post, and StackOverflow. The recovery path is mostly known, the AWS docs just bury it under three layers of conceptual material.

What cloudwatch container insights for eks fluent bit actually involves on Amazon CloudWatch

This task on Amazon CloudWatch is one of the more searched operational topics on AWS in the last 12 months. The procedure below is the path that works in a current AWS account with default IAM and standard VPC config.

The rest of this page is the structured fix path. Start with diagnose, then remediation, then the automation options so you do not have to do this by hand the next time it surfaces. Verify and safety sections at the end are the discipline that keeps the fix from regressing in production.

Signal review

Check CloudWatch Logs for the calling service. Lambda, ECS, EKS, Step Functions, API Gateway, and most managed services write detailed traces to CloudWatch Logs under predictable log group names. Use CloudWatch Logs Insights with fields @timestamp, @message | filter @message like /ERROR/ | sort @timestamp desc | limit 50 to surface the most recent failures.

Reproduce the failure with the AWS CLI in --debug mode. The full SigV4 request payload it emits, plus the exact endpoint URL it resolved to, is what AWS Support uses to verify policy, region, or parameter issues without you having to share IAM credentials. Save the debug output to a file with aws ... --debug 2> debug.log and you can search it for the failed aws.request entry.

Check the AWS Health Dashboard at health.aws.amazon.com for ongoing service events in your region. About one in ten user-reported outages turn out to be region-scoped AWS service degradation already being tracked. AWS Health also exposes an API and EventBridge events, so you can wire a Lambda hook that pages on-call only when the failure correlates with an active AWS Health event in the same region and service.

Solution-focused remediation path

For IAM and STS issues, the timing matters. STS sessions can take up to 60 seconds to propagate after creation. The first call right after assume-role can fail with a permission error even when the policy is correct. Add a small retry with backoff before treating the first failure as definitive.

If the issue points at IAM, do not start by adding * to a policy. Use IAM Access Analyzer (Policy Generator) against the failed action to see the minimum scope. Adding * is the fastest way to fail your next AWS Well-Architected security review, and it usually does not even fix the issue because the explicit deny is often coming from a higher level (SCP, RCP, or permission boundary), not a missing allow.

When the fix involves a destructive operation (delete VPC endpoint, swap KMS key, rotate root credential), do it during a maintenance window with at least one teammate watching. Several Amazon CloudWatch operations have implicit dependencies that only show up when traffic starts flowing again. Document the rollback path before you start, not during the incident.

Automate this fix so you do not do it twice

Automate the fix with Python and boto3

For anything you do more than twice, write a small Python script. The boto3 pattern below uses paginators (so it does not blow up on accounts with thousands of resources), explicit region binding, and a dry-run flag that defaults to True. Keep the script under 100 lines; if it grows beyond that, you are building a tool and should put it behind a Lambda with proper logging.

import boto3, sys
DRY_RUN = '--apply' not in sys.argv
client = boto3.client('cloudwatch', region_name='us-east-1')
paginator = client.get_paginator('describe_...')
for page in paginator.paginate(): for item in page.get('Items', []): if item.get('Status') == 'FAILED': if DRY_RUN: print(f'[dry-run] would fix {item["Id"]}') else: client.modify_...(ResourceId=item['Id']) print(f'fixed {item["Id"]}')

Codify the fix in Terraform or CloudFormation

When you reach for the console to fix the same issue twice, the third occurrence should be solved in IaC, not in the console. Terraform's terraform import and CloudFormation's resource importer let you adopt the existing resource into state without recreating it. Lock the corrected attribute behind a variable so the next operator does not have to rediscover the value. Add a moved {} block or CloudFormation resource refactor to keep the diff clean.

Wire the fix into EventBridge for self-healing

If the failure mode is recurring, automate the remediation instead of the diagnosis. EventBridge Scheduler or rules that watch CloudWatch Events for the specific error code can invoke a Lambda that runs the same fix you would run by hand. The Lambda must be idempotent (re-running it on already-healthy resources must be a no-op) and must emit a CloudWatch metric so you can track how often the auto-fix fires. A spike in auto-fix invocations is itself a signal worth alerting on.

# EventBridge rule pattern (JSON)
{ "source": ["aws.cloudwatch"], "detail-type": ["AWS API Call via CloudTrail"], "detail": { "errorCode": ["AccessDenied", "ThrottlingException"] }
}

Things that bite

The pitfall most teams hit on Amazon CloudWatch is moving too fast and skipping the read-only validation step. Before any write, list the current state and save it. AWS APIs are eventually consistent for many resource types, so the validation snapshot is your only reliable reference if you need to undo. Save the output of the describe call to S3, not to your laptop.

Second pitfall: confusing IAM permission errors with networking errors. AccessDenied can be IAM (policy missing), networking (VPC endpoint policy blocking the call), or KMS (key policy missing). The error string looks identical for all three. Distinguish by looking at the CloudTrail event's errorCode and the encoded authorization message; do not assume IAM is the culprit just because the message says AccessDenied.

Repair sequence

• Reproduce the original symptom path. If it still surfaces in any account or region or IAM role, you have not fixed it.
• Watch for 24 to 48 hours. AWS metrics and policy systems can mask issues with cached health for 6 to 12 hours, especially CloudFront and Route 53.
• Run a smoke test under realistic load. Happy-path tests miss race conditions and IAM session-cache issues.
• Capture the new state in a runbook so the next person on call does not have to rediscover this. Push it to Confluence or your team wiki, not into Slack.
• If the fix involved a permission change, run IAM Access Analyzer one more time to confirm you did not open a separate hole while closing this one.

Safety, rollback, blast radius

• Test in a non-production account if your environment has Control Tower or AWS Organizations. The cost of one sandbox account is cheaper than one rollback meeting.
• Export the existing config before changing it. Most Amazon CloudWatch resources support describe + export to JSON via CLI - capture that to source control before you start.
• Know your rollback path. Some Amazon CloudWatch operations are one-way (region migration, account-level feature opt-in, KMS key deletion past pending window). Confirm reversibility on the AWS doc before you commit.
• Be aware of cross-service impact. IAM role changes ripple to every service trusting that role. KMS key changes break every workload depending on that key. VPC endpoint changes affect every VPC consumer of that endpoint.
• Maintenance window discipline: if the change touches DNS, certificate rotation, or anything that emits TLS handshakes, line up a window with stakeholder notification, not a heroic mid-day swap.

FAQ

Related fixes

Related guides worth a look while you sort this one out:

• How to enable container insights and Prometheus on EKS
• CloudWatch contributor insights rule not matching
• CloudWatch Lambda Insights enhanced monitoring overhead
• CloudWatch Logs Insights query timed out 60 minutes
• DynamoDB hot partition diagnosis with CloudWatch Contributor Insights
• How to enable awslogs driver and view ECS container logs in CloudWatch