CloudWatch Network Monitor probe failed VPC

By Sai Kiran Pandrala · Last verified: 2026-05-31 · Source: AWS re:Post, community Q&A, AWS docs

If you hit CloudWatch Network Monitor probe failed VPC on Amazon CloudWatch in production, the steps below are the path most teams take in 2026. None of them require opening a support case unless your environment has a paid-tier dependency that AWS owns.

What cloudwatch network monitor probe failed vpc actually involves on Amazon CloudWatch

This task on Amazon CloudWatch is one of the more searched operational topics on AWS in the last 12 months. The procedure below is the path that works in a current AWS account with default IAM and standard VPC config.

The rest of this page is the structured fix path. Start with diagnose, then remediation, then the automation options so you do not have to do this by hand the next time it surfaces. Verify and safety sections at the end are the discipline that keeps the fix from regressing in production.

What you'll see

Look at the CloudTrail event for the failed call, even if you are not enrolled in CloudTrail Lake. The basic 90-day event history works for most diagnostic purposes and lives in the console under CloudTrail > Event history. Filter by event name (the API action) and time range; the event JSON shows the exact user identity, source IP, request parameters, and error code.

Diff against last known good. The last config change you made is the cause about three quarters of the time, even when the change should not have mattered. Use AWS Config history (or your Terraform / CloudFormation drift report) to see the actual delta between the resource state when it worked and when it broke. The change you remember is often not the only change that happened.

Check CloudWatch Logs for the calling service. Lambda, ECS, EKS, Step Functions, API Gateway, and most managed services write detailed traces to CloudWatch Logs under predictable log group names. Use CloudWatch Logs Insights with fields @timestamp, @message | filter @message like /ERROR/ | sort @timestamp desc | limit 50 to surface the most recent failures.

Solution-focused remediation path

If networking is suspect, use VPC Reachability Analyzer. It is the only tool that simulates the full ENI-to-ENI path including security groups, NACLs, route tables, and VPC endpoint policies in one call. Manual trace is slower and misses transitive issues. The analyzer charges $0.10 per analysis - cheaper than a 30-minute call with your network team.

If you cannot reproduce the failure consistently, the cause is probably a race condition or a session-cache issue. Run the call with --profile set to a fresh STS session, in a different region you control, with a single concurrent request. If it works there but fails in your normal setup, the difference is the bug.

For IAM and STS issues, the timing matters. STS sessions can take up to 60 seconds to propagate after creation. The first call right after assume-role can fail with a permission error even when the policy is correct. Add a small retry with backoff before treating the first failure as definitive.

Automate this fix so you do not do it twice

Add a Systems Manager Automation runbook

For multi-step fixes that include a manual approval, use SSM Automation. Document the fix as a runbook with aws:approve steps where a human signs off and aws:executeAwsApi steps where the runbook calls the AWS API. Approvers are notified by SNS; the runbook execution shows up in CloudTrail with the approver's identity attached. This makes audit trails easy and stops production fixes from being one-person operations.

Add a CloudWatch alarm so you know next time

The cheapest way to never see the same incident twice is a CloudWatch alarm on the metric that would have warned you. For Amazon CloudWatch, the relevant metrics live under AWS/cloudwatch namespace or under custom metrics published by your Lambda or ECS task. Set thresholds based on observed normal range plus one or two standard deviations, not on round-number guesses. CloudWatch anomaly-detection alarms remove the threshold-guessing problem entirely for metrics with regular seasonality.

Automate the fix with the AWS CLI

The CLI one-liner pattern for Amazon CloudWatch operations is roughly: aws cloudwatch describe-... --query ... to read state, aws cloudwatch modify-... --no-dry-run to apply the change, and aws cloudwatch describe-... --query ... again to verify. Wrap it in a shell script that sets a region variable at the top and exits on first error with set -euo pipefail so a partial run does not leave the account in a half-fixed state.

# Template - replace placeholders with your account specifics
export AWS_REGION=us-east-1
export AWS_PROFILE=prod
aws cloudwatch describe-... --query 'Resources[?Status==`FAILED`].[Id,Reason]' --output table
aws cloudwatch modify-... --resource-id RESOURCE_ID --no-dry-run
aws cloudwatch describe-... --resource-id RESOURCE_ID --query 'Status'

Common traps

The pitfall most teams hit on Amazon CloudWatch is moving too fast and skipping the read-only validation step. Before any write, list the current state and save it. AWS APIs are eventually consistent for many resource types, so the validation snapshot is your only reliable reference if you need to undo. Save the output of the describe call to S3, not to your laptop.

Second pitfall: confusing IAM permission errors with networking errors. AccessDenied can be IAM (policy missing), networking (VPC endpoint policy blocking the call), or KMS (key policy missing). The error string looks identical for all three. Distinguish by looking at the CloudTrail event's errorCode and the encoded authorization message; do not assume IAM is the culprit just because the message says AccessDenied.

The repair

• Reproduce the original symptom path. If it still surfaces in any account or region or IAM role, you have not fixed it.
• Watch for 24 to 48 hours. AWS metrics and policy systems can mask issues with cached health for 6 to 12 hours, especially CloudFront and Route 53.
• Run a smoke test under realistic load. Happy-path tests miss race conditions and IAM session-cache issues.
• Capture the new state in a runbook so the next person on call does not have to rediscover this. Push it to Confluence or your team wiki, not into Slack.
• If the fix involved a permission change, run IAM Access Analyzer one more time to confirm you did not open a separate hole while closing this one.

Safety, rollback, blast radius

• Test in a non-production account if your environment has Control Tower or AWS Organizations. The cost of one sandbox account is cheaper than one rollback meeting.
• Export the existing config before changing it. Most Amazon CloudWatch resources support describe + export to JSON via CLI - capture that to source control before you start.
• Know your rollback path. Some Amazon CloudWatch operations are one-way (region migration, account-level feature opt-in, KMS key deletion past pending window). Confirm reversibility on the AWS doc before you commit.
• Be aware of cross-service impact. IAM role changes ripple to every service trusting that role. KMS key changes break every workload depending on that key. VPC endpoint changes affect every VPC consumer of that endpoint.
• Maintenance window discipline: if the change touches DNS, certificate rotation, or anything that emits TLS handshakes, line up a window with stakeholder notification, not a heroic mid-day swap.

FAQ

Related fixes

Related guides worth a look while you sort this one out:

• CloudWatch Internet Monitor health event scope
• CloudWatch RUM web client failed to send events
• CloudWatch Synthetics canary failed execution role
• How to set up network policies on EKS with Calico or VPC CNI network policies
• How to monitor a Lightsail instance without CloudWatch agent
• SageMaker Studio domain VPC-only mode network unreachable