Cognito hosted UI custom domain with ACM cert in us-east-1

By Sai Kiran Pandrala · Last verified: 2026-05-31 · Source: AWS re:Post, community Q&A, AWS docs

Running into Cognito hosted UI custom domain with ACM cert in us-east-1 on Amazon Cognito is one of the more searched issues on AWS re:Post and StackOverflow in the last 12 months. Here is what actually moves the needle when the AWS docs are too generic.

What cognito hosted ui custom domain with acm cert in us-east-1 actually involves on Amazon Cognito

This task on Amazon Cognito is one of the more searched operational topics on AWS in the last 12 months. The procedure below is the path that works in a current AWS account with default IAM and standard VPC config.

The rest of this page is the structured fix path. Start with diagnose, then remediation, then the automation options so you do not have to do this by hand the next time it surfaces. Verify and safety sections at the end are the discipline that keeps the fix from regressing in production.

What you'll see

Look at the CloudTrail event for the failed call, even if you are not enrolled in CloudTrail Lake. The basic 90-day event history works for most diagnostic purposes and lives in the console under CloudTrail > Event history. Filter by event name (the API action) and time range; the event JSON shows the exact user identity, source IP, request parameters, and error code.

Diff against last known good. The last config change you made is the cause about three quarters of the time, even when the change should not have mattered. Use AWS Config history (or your Terraform / CloudFormation drift report) to see the actual delta between the resource state when it worked and when it broke. The change you remember is often not the only change that happened.

Reproduce the failure with the AWS CLI in --debug mode. The full SigV4 request payload it emits, plus the exact endpoint URL it resolved to, is what AWS Support uses to verify policy, region, or parameter issues without you having to share IAM credentials. Save the debug output to a file with aws ... --debug 2> debug.log and you can search it for the failed aws.request entry.

Solution-focused remediation path

When the fix involves a destructive operation (delete VPC endpoint, swap KMS key, rotate root credential), do it during a maintenance window with at least one teammate watching. Several Amazon Cognito operations have implicit dependencies that only show up when traffic starts flowing again. Document the rollback path before you start, not during the incident.

If the issue points at IAM, do not start by adding * to a policy. Use IAM Access Analyzer (Policy Generator) against the failed action to see the minimum scope. Adding * is the fastest way to fail your next AWS Well-Architected security review, and it usually does not even fix the issue because the explicit deny is often coming from a higher level (SCP, RCP, or permission boundary), not a missing allow.

If you cannot reproduce the failure consistently, the cause is probably a race condition or a session-cache issue. Run the call with --profile set to a fresh STS session, in a different region you control, with a single concurrent request. If it works there but fails in your normal setup, the difference is the bug.

Automate this fix so you do not do it twice

Add a CloudWatch alarm so you know next time

The cheapest way to never see the same incident twice is a CloudWatch alarm on the metric that would have warned you. For Amazon Cognito, the relevant metrics live under AWS/cognito namespace or under custom metrics published by your Lambda or ECS task. Set thresholds based on observed normal range plus one or two standard deviations, not on round-number guesses. CloudWatch anomaly-detection alarms remove the threshold-guessing problem entirely for metrics with regular seasonality.

Add a Systems Manager Automation runbook

For multi-step fixes that include a manual approval, use SSM Automation. Document the fix as a runbook with aws:approve steps where a human signs off and aws:executeAwsApi steps where the runbook calls the AWS API. Approvers are notified by SNS; the runbook execution shows up in CloudTrail with the approver's identity attached. This makes audit trails easy and stops production fixes from being one-person operations.

Automate the fix with the AWS CLI

The CLI one-liner pattern for Amazon Cognito operations is roughly: aws cognito describe-... --query ... to read state, aws cognito modify-... --no-dry-run to apply the change, and aws cognito describe-... --query ... again to verify. Wrap it in a shell script that sets a region variable at the top and exits on first error with set -euo pipefail so a partial run does not leave the account in a half-fixed state.

# Template - replace placeholders with your account specifics
export AWS_REGION=us-east-1
export AWS_PROFILE=prod
aws cognito describe-... --query 'Resources[?Status==`FAILED`].[Id,Reason]' --output table
aws cognito modify-... --resource-id RESOURCE_ID --no-dry-run
aws cognito describe-... --resource-id RESOURCE_ID --query 'Status'

Common traps

A subtle pitfall on Amazon Cognito is that the AWS Console and the SDK can disagree about resource state during a configuration change. Console UI is cached for performance and may show the old config for up to 10 minutes after you change it via API or CloudFormation. Always confirm with describe-* CLI calls during a change window, not with screenshots from the Console.

The other pitfall: assuming that an automated remediation is correct because it succeeded. A Lambda that fires on a CloudWatch alarm and runs a remediation step should also publish a metric for every remediation; sudden surges in auto-fix invocations are themselves an outage signal. Otherwise you can hide a slow-burn regression behind a quiet remediation loop for weeks.

The repair

• Reproduce the original symptom path. If it still surfaces in any account or region or IAM role, you have not fixed it.
• Watch for 24 to 48 hours. AWS metrics and policy systems can mask issues with cached health for 6 to 12 hours, especially CloudFront and Route 53.
• Run a smoke test under realistic load. Happy-path tests miss race conditions and IAM session-cache issues.
• Capture the new state in a runbook so the next person on call does not have to rediscover this. Push it to Confluence or your team wiki, not into Slack.
• If the fix involved a permission change, run IAM Access Analyzer one more time to confirm you did not open a separate hole while closing this one.

Safety, rollback, blast radius

• Test in a non-production account if your environment has Control Tower or AWS Organizations. The cost of one sandbox account is cheaper than one rollback meeting.
• Export the existing config before changing it. Most Amazon Cognito resources support describe + export to JSON via CLI - capture that to source control before you start.
• Know your rollback path. Some Amazon Cognito operations are one-way (region migration, account-level feature opt-in, KMS key deletion past pending window). Confirm reversibility on the AWS doc before you commit.
• Be aware of cross-service impact. IAM role changes ripple to every service trusting that role. KMS key changes break every workload depending on that key. VPC endpoint changes affect every VPC consumer of that endpoint.
• Maintenance window discipline: if the change touches DNS, certificate rotation, or anything that emits TLS handshakes, line up a window with stakeholder notification, not a heroic mid-day swap.

FAQ

Related fixes

Related guides worth a look while you sort this one out:

• API Gateway custom domain name with ACM in same region
• ACM certificate not visible in CloudFront dropdown must be in us-east-1
• CloudFront custom domain CNAMEAlreadyExists across accounts SSL cert verification
• ACM CloudFront requires cert in us-east-1 region trap
• Cognito custom auth Lambda triggers DefineAuthChallenge CreateAuthChallenge
• Cognito pre-token-generation Lambda add custom claims to ID token