Detective Cost saving scoped investigation source accounts

By Sai Kiran Pandrala · Last verified: 2026-05-31 · Source: community Q&A, AWS re:Post, AWS docs

When Detective Cost saving scoped investigation source accounts bites you on Amazon Detective, the first instinct is to open a ticket. Most of the time you do not have to. The steps below are the ones AWS Support would walk you through on the call.

What detective cost saving scoped investigation source accounts actually involves on Amazon Detective

This task on Amazon Detective is one of the more searched operational topics on AWS in the last 12 months. The procedure below is the path that works in a current AWS account with default IAM and standard VPC config.

The rest of this page is the structured fix path. Start with diagnose, then remediation, then the automation options so you do not have to do this by hand the next time it surfaces. Verify and safety sections at the end are the discipline that keeps the fix from regressing in production.

What you'll see

Check the AWS Health Dashboard at health.aws.amazon.com for ongoing service events in your region. About one in ten user-reported outages turn out to be region-scoped AWS service degradation already being tracked. AWS Health also exposes an API and EventBridge events, so you can wire a Lambda hook that pages on-call only when the failure correlates with an active AWS Health event in the same region and service.

Reproduce the failure with the AWS CLI in --debug mode. The full SigV4 request payload it emits, plus the exact endpoint URL it resolved to, is what AWS Support uses to verify policy, region, or parameter issues without you having to share IAM credentials. Save the debug output to a file with aws ... --debug 2> debug.log and you can search it for the failed aws.request entry.

Diff against last known good. The last config change you made is the cause about three quarters of the time, even when the change should not have mattered. Use AWS Config history (or your Terraform / CloudFormation drift report) to see the actual delta between the resource state when it worked and when it broke. The change you remember is often not the only change that happened.

Solution-focused remediation path

If networking is suspect, use VPC Reachability Analyzer. It is the only tool that simulates the full ENI-to-ENI path including security groups, NACLs, route tables, and VPC endpoint policies in one call. Manual trace is slower and misses transitive issues. The analyzer charges $0.10 per analysis - cheaper than a 30-minute call with your network team.

For IAM and STS issues, the timing matters. STS sessions can take up to 60 seconds to propagate after creation. The first call right after assume-role can fail with a permission error even when the policy is correct. Add a small retry with backoff before treating the first failure as definitive.

Most Amazon Detective failures fall into one of three buckets: IAM permission gap, networking path break (security group, NACL, or VPC endpoint policy), or service-limit / quota hit. Run that mental triage first - it covers around 80 percent of real-world cases. If the failure does not fit any of the three, it is likely a service-side regression worth opening a re:Post or support ticket for.

Automate this fix so you do not do it twice

Codify the fix in Terraform or CloudFormation

When you reach for the console to fix the same issue twice, the third occurrence should be solved in IaC, not in the console. Terraform's terraform import and CloudFormation's resource importer let you adopt the existing resource into state without recreating it. Lock the corrected attribute behind a variable so the next operator does not have to rediscover the value. Add a moved {} block or CloudFormation resource refactor to keep the diff clean.

Add a CloudWatch alarm so you know next time

The cheapest way to never see the same incident twice is a CloudWatch alarm on the metric that would have warned you. For Amazon Detective, the relevant metrics live under AWS/detective namespace or under custom metrics published by your Lambda or ECS task. Set thresholds based on observed normal range plus one or two standard deviations, not on round-number guesses. CloudWatch anomaly-detection alarms remove the threshold-guessing problem entirely for metrics with regular seasonality.

Automate the fix with the AWS CLI

The CLI one-liner pattern for Amazon Detective operations is roughly: aws detective describe-... --query ... to read state, aws detective modify-... --no-dry-run to apply the change, and aws detective describe-... --query ... again to verify. Wrap it in a shell script that sets a region variable at the top and exits on first error with set -euo pipefail so a partial run does not leave the account in a half-fixed state.

# Template - replace placeholders with your account specifics
export AWS_REGION=us-east-1
export AWS_PROFILE=prod
aws detective describe-... --query 'Resources[?Status==`FAILED`].[Id,Reason]' --output table
aws detective modify-... --resource-id RESOURCE_ID --no-dry-run
aws detective describe-... --resource-id RESOURCE_ID --query 'Status'

Common traps

The most common pitfall when fixing this on Amazon Detective is treating it as a one-off rather than as a recurring class of incident. The same misconfiguration tends to happen again after a deployment, a role rotation, or a region migration unless the fix is codified. Add a CloudFormation hook, Service Control Policy condition, or AWS Config rule that prevents the same misconfig from being introduced again. Documentation alone does not survive turnover.

Another common trap: confirming the fix on a single resource and assuming the fleet is healthy. Loop your check across every account, region, and IAM principal that could exhibit the same symptom. If you cannot enumerate the affected scope without a script, you do not yet understand the scope.

The repair

• Reproduce the original symptom path. If it still surfaces in any account or region or IAM role, you have not fixed it.
• Watch for 24 to 48 hours. AWS metrics and policy systems can mask issues with cached health for 6 to 12 hours, especially CloudFront and Route 53.
• Run a smoke test under realistic load. Happy-path tests miss race conditions and IAM session-cache issues.
• Capture the new state in a runbook so the next person on call does not have to rediscover this. Push it to Confluence or your team wiki, not into Slack.
• If the fix involved a permission change, run IAM Access Analyzer one more time to confirm you did not open a separate hole while closing this one.

Safety, rollback, blast radius

• Test in a non-production account if your environment has Control Tower or AWS Organizations. The cost of one sandbox account is cheaper than one rollback meeting.
• Export the existing config before changing it. Most Amazon Detective resources support describe + export to JSON via CLI - capture that to source control before you start.
• Know your rollback path. Some Amazon Detective operations are one-way (region migration, account-level feature opt-in, KMS key deletion past pending window). Confirm reversibility on the AWS doc before you commit.
• Be aware of cross-service impact. IAM role changes ripple to every service trusting that role. KMS key changes break every workload depending on that key. VPC endpoint changes affect every VPC consumer of that endpoint.
• Maintenance window discipline: if the change touches DNS, certificate rotation, or anything that emits TLS handshakes, line up a window with stakeholder notification, not a heroic mid-day swap.

FAQ

Related fixes

Related guides worth a look while you sort this one out:

• Detective cost per-GB of data ingested per account per month
• Detective Disable cleanly across all member accounts
• Detective EKS investigation detect compromised pod path
• Detective Investigation graph trace lateral movement after GuardDuty finding
• Detective with Security Hub pivot to investigation from finding
• Athena query cost above expected partition pruning failure