Inspector CVE filtering by severity in findings

By Sai Kiran Pandrala · Last verified: 2026-05-31 · Source: community Q&A, AWS re:Post, AWS docs

Running into Inspector CVE filtering by severity in findings on Amazon Inspector is one of the more searched issues on AWS re:Post and StackOverflow in the last 12 months. Here is what actually moves the needle when the AWS docs are too generic.

What inspector cve filtering by severity in findings actually involves on Amazon Inspector

This task on Amazon Inspector is one of the more searched operational topics on AWS in the last 12 months. The procedure below is the path that works in a current AWS account with default IAM and standard VPC config.

The rest of this page is the structured fix path. Start with diagnose, then remediation, then the automation options so you do not have to do this by hand the next time it surfaces. Verify and safety sections at the end are the discipline that keeps the fix from regressing in production.

Spot the symptom

Diff against last known good. The last config change you made is the cause about three quarters of the time, even when the change should not have mattered. Use AWS Config history (or your Terraform / CloudFormation drift report) to see the actual delta between the resource state when it worked and when it broke. The change you remember is often not the only change that happened.

Look at the CloudTrail event for the failed call, even if you are not enrolled in CloudTrail Lake. The basic 90-day event history works for most diagnostic purposes and lives in the console under CloudTrail > Event history. Filter by event name (the API action) and time range; the event JSON shows the exact user identity, source IP, request parameters, and error code.

Run aws sts get-caller-identity first. About one in five 'why does this not work' tickets are actually 'I am in the wrong account' or 'my session expired and the SDK is using stale creds'. The 5-second sanity check costs nothing and saves real time when the answer is that simple.

Solution-focused remediation path

When the failure happens in production but not in dev, do not just compare the IAM policy. Compare the SCP / RCP at the OU level, the permission boundary on the role, and the resource-based policy on the target. One of those is almost always different between accounts. AWS Config conformance packs make this comparison routine.

If you cannot reproduce the failure consistently, the cause is probably a race condition or a session-cache issue. Run the call with --profile set to a fresh STS session, in a different region you control, with a single concurrent request. If it works there but fails in your normal setup, the difference is the bug.

If the issue points at IAM, do not start by adding * to a policy. Use IAM Access Analyzer (Policy Generator) against the failed action to see the minimum scope. Adding * is the fastest way to fail your next AWS Well-Architected security review, and it usually does not even fix the issue because the explicit deny is often coming from a higher level (SCP, RCP, or permission boundary), not a missing allow.

Automate this fix so you do not do it twice

Wire the fix into EventBridge for self-healing

If the failure mode is recurring, automate the remediation instead of the diagnosis. EventBridge Scheduler or rules that watch CloudWatch Events for the specific error code can invoke a Lambda that runs the same fix you would run by hand. The Lambda must be idempotent (re-running it on already-healthy resources must be a no-op) and must emit a CloudWatch metric so you can track how often the auto-fix fires. A spike in auto-fix invocations is itself a signal worth alerting on.

# EventBridge rule pattern (JSON)
{ "source": ["aws.inspector"], "detail-type": ["AWS API Call via CloudTrail"], "detail": { "errorCode": ["AccessDenied", "ThrottlingException"] }
}

Automate the fix with the AWS CLI

The CLI one-liner pattern for Amazon Inspector operations is roughly: aws inspector describe-... --query ... to read state, aws inspector modify-... --no-dry-run to apply the change, and aws inspector describe-... --query ... again to verify. Wrap it in a shell script that sets a region variable at the top and exits on first error with set -euo pipefail so a partial run does not leave the account in a half-fixed state.

# Template - replace placeholders with your account specifics
export AWS_REGION=us-east-1
export AWS_PROFILE=prod
aws inspector describe-... --query 'Resources[?Status==`FAILED`].[Id,Reason]' --output table
aws inspector modify-... --resource-id RESOURCE_ID --no-dry-run
aws inspector describe-... --resource-id RESOURCE_ID --query 'Status'

Codify the fix in Terraform or CloudFormation

When you reach for the console to fix the same issue twice, the third occurrence should be solved in IaC, not in the console. Terraform's terraform import and CloudFormation's resource importer let you adopt the existing resource into state without recreating it. Lock the corrected attribute behind a variable so the next operator does not have to rediscover the value. Add a moved {} block or CloudFormation resource refactor to keep the diff clean.

Pitfalls

A subtle pitfall on Amazon Inspector is that the AWS Console and the SDK can disagree about resource state during a configuration change. Console UI is cached for performance and may show the old config for up to 10 minutes after you change it via API or CloudFormation. Always confirm with describe-* CLI calls during a change window, not with screenshots from the Console.

The other pitfall: assuming that an automated remediation is correct because it succeeded. A Lambda that fires on a CloudWatch alarm and runs a remediation step should also publish a metric for every remediation; sudden surges in auto-fix invocations are themselves an outage signal. Otherwise you can hide a slow-burn regression behind a quiet remediation loop for weeks.

Full fix path

• Reproduce the original symptom path. If it still surfaces in any account or region or IAM role, you have not fixed it.
• Watch for 24 to 48 hours. AWS metrics and policy systems can mask issues with cached health for 6 to 12 hours, especially CloudFront and Route 53.
• Run a smoke test under realistic load. Happy-path tests miss race conditions and IAM session-cache issues.
• Capture the new state in a runbook so the next person on call does not have to rediscover this. Push it to Confluence or your team wiki, not into Slack.
• If the fix involved a permission change, run IAM Access Analyzer one more time to confirm you did not open a separate hole while closing this one.

Safety, rollback, blast radius

• Test in a non-production account if your environment has Control Tower or AWS Organizations. The cost of one sandbox account is cheaper than one rollback meeting.
• Export the existing config before changing it. Most Amazon Inspector resources support describe + export to JSON via CLI - capture that to source control before you start.
• Know your rollback path. Some Amazon Inspector operations are one-way (region migration, account-level feature opt-in, KMS key deletion past pending window). Confirm reversibility on the AWS doc before you commit.
• Be aware of cross-service impact. IAM role changes ripple to every service trusting that role. KMS key changes break every workload depending on that key. VPC endpoint changes affect every VPC consumer of that endpoint.
• Maintenance window discipline: if the change touches DNS, certificate rotation, or anything that emits TLS handshakes, line up a window with stakeholder notification, not a heroic mid-day swap.

FAQ

Related fixes

Related guides worth a look while you sort this one out:

• Inspector Vulnerability findings export to S3 with KMS
• Cognito user pool delete in use by identity pool error
• Encrypt unencrypted EBS volume by snapshot-copy-restore loop
• How to fix CrashLoopBackOff in EKS pods step by step
• GuardDuty Disable cleanly archive findings detach delegated admin
• GuardDuty Findings export to S3 with KMS for SIEM ingest