Kendra access control list ACL principal mapping

By Sai Kiran Pandrala · Last verified: 2026-05-31 · Source: AWS re:Post, community Q&A, AWS docs

When Kendra access control list ACL principal mapping bites you on Amazon Kendra, the first instinct is to open a ticket. Most of the time you do not have to. The steps below are the ones AWS Support would walk you through on the call.

What kendra access control list acl principal mapping actually involves on Amazon Kendra

This task on Amazon Kendra is one of the more searched operational topics on AWS in the last 12 months. The procedure below is the path that works in a current AWS account with default IAM and standard VPC config.

The rest of this page is the structured fix path. Start with diagnose, then remediation, then the automation options so you do not have to do this by hand the next time it surfaces. Verify and safety sections at the end are the discipline that keeps the fix from regressing in production.

Spot the symptom

Look at the CloudTrail event for the failed call, even if you are not enrolled in CloudTrail Lake. The basic 90-day event history works for most diagnostic purposes and lives in the console under CloudTrail > Event history. Filter by event name (the API action) and time range; the event JSON shows the exact user identity, source IP, request parameters, and error code.

Reproduce the failure with the AWS CLI in --debug mode. The full SigV4 request payload it emits, plus the exact endpoint URL it resolved to, is what AWS Support uses to verify policy, region, or parameter issues without you having to share IAM credentials. Save the debug output to a file with aws ... --debug 2> debug.log and you can search it for the failed aws.request entry.

Diff against last known good. The last config change you made is the cause about three quarters of the time, even when the change should not have mattered. Use AWS Config history (or your Terraform / CloudFormation drift report) to see the actual delta between the resource state when it worked and when it broke. The change you remember is often not the only change that happened.

Solution-focused remediation path

If networking is suspect, use VPC Reachability Analyzer. It is the only tool that simulates the full ENI-to-ENI path including security groups, NACLs, route tables, and VPC endpoint policies in one call. Manual trace is slower and misses transitive issues. The analyzer charges $0.10 per analysis - cheaper than a 30-minute call with your network team.

When the failure happens in production but not in dev, do not just compare the IAM policy. Compare the SCP / RCP at the OU level, the permission boundary on the role, and the resource-based policy on the target. One of those is almost always different between accounts. AWS Config conformance packs make this comparison routine.

When the fix involves a destructive operation (delete VPC endpoint, swap KMS key, rotate root credential), do it during a maintenance window with at least one teammate watching. Several Amazon Kendra operations have implicit dependencies that only show up when traffic starts flowing again. Document the rollback path before you start, not during the incident.

Automate this fix so you do not do it twice

Automate the fix with Python and boto3

For anything you do more than twice, write a small Python script. The boto3 pattern below uses paginators (so it does not blow up on accounts with thousands of resources), explicit region binding, and a dry-run flag that defaults to True. Keep the script under 100 lines; if it grows beyond that, you are building a tool and should put it behind a Lambda with proper logging.

import boto3, sys
DRY_RUN = '--apply' not in sys.argv
client = boto3.client('kendra', region_name='us-east-1')
paginator = client.get_paginator('describe_...')
for page in paginator.paginate(): for item in page.get('Items', []): if item.get('Status') == 'FAILED': if DRY_RUN: print(f'[dry-run] would fix {item["Id"]}') else: client.modify_...(ResourceId=item['Id']) print(f'fixed {item["Id"]}')

Wire the fix into EventBridge for self-healing

If the failure mode is recurring, automate the remediation instead of the diagnosis. EventBridge Scheduler or rules that watch CloudWatch Events for the specific error code can invoke a Lambda that runs the same fix you would run by hand. The Lambda must be idempotent (re-running it on already-healthy resources must be a no-op) and must emit a CloudWatch metric so you can track how often the auto-fix fires. A spike in auto-fix invocations is itself a signal worth alerting on.

# EventBridge rule pattern (JSON)
{ "source": ["aws.kendra"], "detail-type": ["AWS API Call via CloudTrail"], "detail": { "errorCode": ["AccessDenied", "ThrottlingException"] }
}

Automate the fix with the AWS CLI

The CLI one-liner pattern for Amazon Kendra operations is roughly: aws kendra describe-... --query ... to read state, aws kendra modify-... --no-dry-run to apply the change, and aws kendra describe-... --query ... again to verify. Wrap it in a shell script that sets a region variable at the top and exits on first error with set -euo pipefail so a partial run does not leave the account in a half-fixed state.

# Template - replace placeholders with your account specifics
export AWS_REGION=us-east-1
export AWS_PROFILE=prod
aws kendra describe-... --query 'Resources[?Status==`FAILED`].[Id,Reason]' --output table
aws kendra modify-... --resource-id RESOURCE_ID --no-dry-run
aws kendra describe-... --resource-id RESOURCE_ID --query 'Status'

Pitfalls

The pitfall most teams hit on Amazon Kendra is moving too fast and skipping the read-only validation step. Before any write, list the current state and save it. AWS APIs are eventually consistent for many resource types, so the validation snapshot is your only reliable reference if you need to undo. Save the output of the describe call to S3, not to your laptop.

Second pitfall: confusing IAM permission errors with networking errors. AccessDenied can be IAM (policy missing), networking (VPC endpoint policy blocking the call), or KMS (key policy missing). The error string looks identical for all three. Distinguish by looking at the CloudTrail event's errorCode and the encoded authorization message; do not assume IAM is the culprit just because the message says AccessDenied.

Full fix path

• Reproduce the original symptom path. If it still surfaces in any account or region or IAM role, you have not fixed it.
• Watch for 24 to 48 hours. AWS metrics and policy systems can mask issues with cached health for 6 to 12 hours, especially CloudFront and Route 53.
• Run a smoke test under realistic load. Happy-path tests miss race conditions and IAM session-cache issues.
• Capture the new state in a runbook so the next person on call does not have to rediscover this. Push it to Confluence or your team wiki, not into Slack.
• If the fix involved a permission change, run IAM Access Analyzer one more time to confirm you did not open a separate hole while closing this one.

Safety, rollback, blast radius

• Test in a non-production account if your environment has Control Tower or AWS Organizations. The cost of one sandbox account is cheaper than one rollback meeting.
• Export the existing config before changing it. Most Amazon Kendra resources support describe + export to JSON via CLI - capture that to source control before you start.
• Know your rollback path. Some Amazon Kendra operations are one-way (region migration, account-level feature opt-in, KMS key deletion past pending window). Confirm reversibility on the AWS doc before you commit.
• Be aware of cross-service impact. IAM role changes ripple to every service trusting that role. KMS key changes break every workload depending on that key. VPC endpoint changes affect every VPC consumer of that endpoint.
• Maintenance window discipline: if the change touches DNS, certificate rotation, or anything that emits TLS handshakes, line up a window with stakeholder notification, not a heroic mid-day swap.

FAQ

Related fixes

Related guides worth a look while you sort this one out:

• OpenSearch fine-grained access control role mapping
• Migrate from OAI Origin Access Identity to OAC Origin Access Control
• Bedrock model access request pending approval delay
• CloudFront Cache-Control headers ignored behavior min default max TTL precedence
• Fix CloudFront 403 Access Denied with S3 origin and OAC
• Cognito SAML attribute mapping Email and custom attributes