Lex Connect integration call transferred no response

By Sai Kiran Pandrala · Last verified: 2026-05-31 · Source: community Q&A, AWS docs, AWS re:Post

Engineers running Amazon Lex hit Lex Connect integration call transferred no response often enough that there is a stable fix pattern. This page captures it in the order AWS support would run it during a real incident.

What lex connect integration call transferred no response actually involves on Amazon Lex

This task on Amazon Lex is one of the more searched operational topics on AWS in the last 12 months. The procedure below is the path that works in a current AWS account with default IAM and standard VPC config.

The rest of this page is the structured fix path. Start with diagnose, then remediation, then the automation options so you do not have to do this by hand the next time it surfaces. Verify and safety sections at the end are the discipline that keeps the fix from regressing in production.

Signal review

Look at the CloudTrail event for the failed call, even if you are not enrolled in CloudTrail Lake. The basic 90-day event history works for most diagnostic purposes and lives in the console under CloudTrail > Event history. Filter by event name (the API action) and time range; the event JSON shows the exact user identity, source IP, request parameters, and error code.

Reproduce the failure with the AWS CLI in --debug mode. The full SigV4 request payload it emits, plus the exact endpoint URL it resolved to, is what AWS Support uses to verify policy, region, or parameter issues without you having to share IAM credentials. Save the debug output to a file with aws ... --debug 2> debug.log and you can search it for the failed aws.request entry.

Diff against last known good. The last config change you made is the cause about three quarters of the time, even when the change should not have mattered. Use AWS Config history (or your Terraform / CloudFormation drift report) to see the actual delta between the resource state when it worked and when it broke. The change you remember is often not the only change that happened.

Solution-focused remediation path

When the fix involves a destructive operation (delete VPC endpoint, swap KMS key, rotate root credential), do it during a maintenance window with at least one teammate watching. Several Amazon Lex operations have implicit dependencies that only show up when traffic starts flowing again. Document the rollback path before you start, not during the incident.

If quotas are suspect, the Service Quotas console shows current usage and the active limit side by side. Request increases through Service Quotas, not through Support tickets - quota dashboard requests usually approve faster (often within minutes for soft limits) and they are auditable in CloudTrail. Set up Service Quotas + CloudWatch alarms at 80 percent usage so you get notified before you hit the wall.

Most Amazon Lex failures fall into one of three buckets: IAM permission gap, networking path break (security group, NACL, or VPC endpoint policy), or service-limit / quota hit. Run that mental triage first - it covers around 80 percent of real-world cases. If the failure does not fit any of the three, it is likely a service-side regression worth opening a re:Post or support ticket for.

Automate this fix so you do not do it twice

Wire the fix into EventBridge for self-healing

If the failure mode is recurring, automate the remediation instead of the diagnosis. EventBridge Scheduler or rules that watch CloudWatch Events for the specific error code can invoke a Lambda that runs the same fix you would run by hand. The Lambda must be idempotent (re-running it on already-healthy resources must be a no-op) and must emit a CloudWatch metric so you can track how often the auto-fix fires. A spike in auto-fix invocations is itself a signal worth alerting on.

# EventBridge rule pattern (JSON)
{ "source": ["aws.lex"], "detail-type": ["AWS API Call via CloudTrail"], "detail": { "errorCode": ["AccessDenied", "ThrottlingException"] }
}

Add a CloudWatch alarm so you know next time

The cheapest way to never see the same incident twice is a CloudWatch alarm on the metric that would have warned you. For Amazon Lex, the relevant metrics live under AWS/lex namespace or under custom metrics published by your Lambda or ECS task. Set thresholds based on observed normal range plus one or two standard deviations, not on round-number guesses. CloudWatch anomaly-detection alarms remove the threshold-guessing problem entirely for metrics with regular seasonality.

Automate the fix with the AWS CLI

The CLI one-liner pattern for Amazon Lex operations is roughly: aws lex describe-... --query ... to read state, aws lex modify-... --no-dry-run to apply the change, and aws lex describe-... --query ... again to verify. Wrap it in a shell script that sets a region variable at the top and exits on first error with set -euo pipefail so a partial run does not leave the account in a half-fixed state.

# Template - replace placeholders with your account specifics
export AWS_REGION=us-east-1
export AWS_PROFILE=prod
aws lex describe-... --query 'Resources[?Status==`FAILED`].[Id,Reason]' --output table
aws lex modify-... --resource-id RESOURCE_ID --no-dry-run
aws lex describe-... --resource-id RESOURCE_ID --query 'Status'

Things that bite

The pitfall most teams hit on Amazon Lex is moving too fast and skipping the read-only validation step. Before any write, list the current state and save it. AWS APIs are eventually consistent for many resource types, so the validation snapshot is your only reliable reference if you need to undo. Save the output of the describe call to S3, not to your laptop.

Second pitfall: confusing IAM permission errors with networking errors. AccessDenied can be IAM (policy missing), networking (VPC endpoint policy blocking the call), or KMS (key policy missing). The error string looks identical for all three. Distinguish by looking at the CloudTrail event's errorCode and the encoded authorization message; do not assume IAM is the culprit just because the message says AccessDenied.

Repair sequence

• Reproduce the original symptom path. If it still surfaces in any account or region or IAM role, you have not fixed it.
• Watch for 24 to 48 hours. AWS metrics and policy systems can mask issues with cached health for 6 to 12 hours, especially CloudFront and Route 53.
• Run a smoke test under realistic load. Happy-path tests miss race conditions and IAM session-cache issues.
• Capture the new state in a runbook so the next person on call does not have to rediscover this. Push it to Confluence or your team wiki, not into Slack.
• If the fix involved a permission change, run IAM Access Analyzer one more time to confirm you did not open a separate hole while closing this one.

Safety, rollback, blast radius

• Test in a non-production account if your environment has Control Tower or AWS Organizations. The cost of one sandbox account is cheaper than one rollback meeting.
• Export the existing config before changing it. Most Amazon Lex resources support describe + export to JSON via CLI - capture that to source control before you start.
• Know your rollback path. Some Amazon Lex operations are one-way (region migration, account-level feature opt-in, KMS key deletion past pending window). Confirm reversibility on the AWS doc before you commit.
• Be aware of cross-service impact. IAM role changes ripple to every service trusting that role. KMS key changes break every workload depending on that key. VPC endpoint changes affect every VPC consumer of that endpoint.
• Maintenance window discipline: if the change touches DNS, certificate rotation, or anything that emits TLS handshakes, line up a window with stakeholder notification, not a heroic mid-day swap.

FAQ

Related fixes

Related guides worth a look while you sort this one out:

• API Gateway CORS preflight 403 on OPTIONS mock integration setup
• API Gateway custom request and response transformations using VTL templates
• API Gateway WebSocket connect route returns 502 Lambda permission missing
• Aurora zero-ETL integration with Redshift and DynamoDB
• Bedrock Agents Lambda response format invalid
• Bedrock Knowledge Base initial sync no error message