Rekognition InvalidS3ObjectException permission denied

By Sai Kiran Pandrala · Last verified: 2026-05-31 · Source: community Q&A, AWS docs, AWS re:Post

Rekognition InvalidS3ObjectException permission denied on Amazon Rekognition sits in the most-reported issues list across r/aws, AWS re:Post, and StackOverflow. The recovery path is mostly known, the AWS docs just bury it under three layers of conceptual material.

What rekognition invalids3objectexception permission denied actually involves on Amazon Rekognition

This task on Amazon Rekognition is one of the more searched operational topics on AWS in the last 12 months. The procedure below is the path that works in a current AWS account with default IAM and standard VPC config.

The rest of this page is the structured fix path. Start with diagnose, then remediation, then the automation options so you do not have to do this by hand the next time it surfaces. Verify and safety sections at the end are the discipline that keeps the fix from regressing in production.

Spot the symptom

Check the AWS Health Dashboard at health.aws.amazon.com for ongoing service events in your region. About one in ten user-reported outages turn out to be region-scoped AWS service degradation already being tracked. AWS Health also exposes an API and EventBridge events, so you can wire a Lambda hook that pages on-call only when the failure correlates with an active AWS Health event in the same region and service.

Reproduce the failure with the AWS CLI in --debug mode. The full SigV4 request payload it emits, plus the exact endpoint URL it resolved to, is what AWS Support uses to verify policy, region, or parameter issues without you having to share IAM credentials. Save the debug output to a file with aws ... --debug 2> debug.log and you can search it for the failed aws.request entry.

Look at the CloudTrail event for the failed call, even if you are not enrolled in CloudTrail Lake. The basic 90-day event history works for most diagnostic purposes and lives in the console under CloudTrail > Event history. Filter by event name (the API action) and time range; the event JSON shows the exact user identity, source IP, request parameters, and error code.

Solution-focused remediation path

When the failure happens in production but not in dev, do not just compare the IAM policy. Compare the SCP / RCP at the OU level, the permission boundary on the role, and the resource-based policy on the target. One of those is almost always different between accounts. AWS Config conformance packs make this comparison routine.

Most Amazon Rekognition failures fall into one of three buckets: IAM permission gap, networking path break (security group, NACL, or VPC endpoint policy), or service-limit / quota hit. Run that mental triage first - it covers around 80 percent of real-world cases. If the failure does not fit any of the three, it is likely a service-side regression worth opening a re:Post or support ticket for.

If quotas are suspect, the Service Quotas console shows current usage and the active limit side by side. Request increases through Service Quotas, not through Support tickets - quota dashboard requests usually approve faster (often within minutes for soft limits) and they are auditable in CloudTrail. Set up Service Quotas + CloudWatch alarms at 80 percent usage so you get notified before you hit the wall.

Automate this fix so you do not do it twice

Automate the fix with Python and boto3

For anything you do more than twice, write a small Python script. The boto3 pattern below uses paginators (so it does not blow up on accounts with thousands of resources), explicit region binding, and a dry-run flag that defaults to True. Keep the script under 100 lines; if it grows beyond that, you are building a tool and should put it behind a Lambda with proper logging.

import boto3, sys
DRY_RUN = '--apply' not in sys.argv
client = boto3.client('rekognition', region_name='us-east-1')
paginator = client.get_paginator('describe_...')
for page in paginator.paginate(): for item in page.get('Items', []): if item.get('Status') == 'FAILED': if DRY_RUN: print(f'[dry-run] would fix {item["Id"]}') else: client.modify_...(ResourceId=item['Id']) print(f'fixed {item["Id"]}')

Codify the fix in Terraform or CloudFormation

When you reach for the console to fix the same issue twice, the third occurrence should be solved in IaC, not in the console. Terraform's terraform import and CloudFormation's resource importer let you adopt the existing resource into state without recreating it. Lock the corrected attribute behind a variable so the next operator does not have to rediscover the value. Add a moved {} block or CloudFormation resource refactor to keep the diff clean.

Automate the fix with the AWS CLI

The CLI one-liner pattern for Amazon Rekognition operations is roughly: aws rekognition describe-... --query ... to read state, aws rekognition modify-... --no-dry-run to apply the change, and aws rekognition describe-... --query ... again to verify. Wrap it in a shell script that sets a region variable at the top and exits on first error with set -euo pipefail so a partial run does not leave the account in a half-fixed state.

# Template - replace placeholders with your account specifics
export AWS_REGION=us-east-1
export AWS_PROFILE=prod
aws rekognition describe-... --query 'Resources[?Status==`FAILED`].[Id,Reason]' --output table
aws rekognition modify-... --resource-id RESOURCE_ID --no-dry-run
aws rekognition describe-... --resource-id RESOURCE_ID --query 'Status'

Pitfalls

The pitfall most teams hit on Amazon Rekognition is moving too fast and skipping the read-only validation step. Before any write, list the current state and save it. AWS APIs are eventually consistent for many resource types, so the validation snapshot is your only reliable reference if you need to undo. Save the output of the describe call to S3, not to your laptop.

Second pitfall: confusing IAM permission errors with networking errors. AccessDenied can be IAM (policy missing), networking (VPC endpoint policy blocking the call), or KMS (key policy missing). The error string looks identical for all three. Distinguish by looking at the CloudTrail event's errorCode and the encoded authorization message; do not assume IAM is the culprit just because the message says AccessDenied.

Full fix path

• Reproduce the original symptom path. If it still surfaces in any account or region or IAM role, you have not fixed it.
• Watch for 24 to 48 hours. AWS metrics and policy systems can mask issues with cached health for 6 to 12 hours, especially CloudFront and Route 53.
• Run a smoke test under realistic load. Happy-path tests miss race conditions and IAM session-cache issues.
• Capture the new state in a runbook so the next person on call does not have to rediscover this. Push it to Confluence or your team wiki, not into Slack.
• If the fix involved a permission change, run IAM Access Analyzer one more time to confirm you did not open a separate hole while closing this one.

Safety, rollback, blast radius

• Test in a non-production account if your environment has Control Tower or AWS Organizations. The cost of one sandbox account is cheaper than one rollback meeting.
• Export the existing config before changing it. Most Amazon Rekognition resources support describe + export to JSON via CLI - capture that to source control before you start.
• Know your rollback path. Some Amazon Rekognition operations are one-way (region migration, account-level feature opt-in, KMS key deletion past pending window). Confirm reversibility on the AWS doc before you commit.
• Be aware of cross-service impact. IAM role changes ripple to every service trusting that role. KMS key changes break every workload depending on that key. VPC endpoint changes affect every VPC consumer of that endpoint.
• Maintenance window discipline: if the change touches DNS, certificate rotation, or anything that emits TLS handshakes, line up a window with stakeholder notification, not a heroic mid-day swap.

FAQ

Related fixes

Related guides worth a look while you sort this one out:

• How to fix Permission denied (publickey) when SSHing to EC2
• How to fix ECS task IAM role permission denied for S3 or DynamoDB
• EventBridge cross-account event bus permission denied
• Polly output S3 bucket key prefix permission denied
• QuickSight Author user role permission denied
• QuickSight SPICE refresh failed PERMISSION_DENIED IAM role