S3 fixing CORS errors when uploading from React or Vite browser app

By Sai Kiran Pandrala · Last verified: 2026-05-31 · Source: community Q&A, AWS docs, AWS re:Post

S3 fixing CORS errors when uploading from React or Vite browser app on Amazon S3 sits in the most-reported issues list across r/aws, AWS re:Post, and StackOverflow. The recovery path is mostly known, the AWS docs just bury it under three layers of conceptual material.

What s3 fixing cors errors when uploading from react or vite browser app actually involves on Amazon S3

This task on Amazon S3 is one of the more searched operational topics on AWS in the last 12 months. The procedure below is the path that works in a current AWS account with default IAM and standard VPC config.

The rest of this page is the structured fix path. Start with diagnose, then remediation, then the automation options so you do not have to do this by hand the next time it surfaces. Verify and safety sections at the end are the discipline that keeps the fix from regressing in production.

What you'll see

Pull the AWS request ID from the response headers: x-amz-request-id for most services, x-amzn-RequestId for API Gateway, both x-amz-request-id and x-amz-id-2 for S3. AWS Support needs these IDs to look up your call in their internal logs - without them, the first reply on a ticket will ask you to reproduce the call and capture them. Save them with a timestamp; AWS Support cannot retrieve calls older than 90 days for most services.

Look at the CloudTrail event for the failed call, even if you are not enrolled in CloudTrail Lake. The basic 90-day event history works for most diagnostic purposes and lives in the console under CloudTrail > Event history. Filter by event name (the API action) and time range; the event JSON shows the exact user identity, source IP, request parameters, and error code.

Diff against last known good. The last config change you made is the cause about three quarters of the time, even when the change should not have mattered. Use AWS Config history (or your Terraform / CloudFormation drift report) to see the actual delta between the resource state when it worked and when it broke. The change you remember is often not the only change that happened.

Solution-focused remediation path

If networking is suspect, use VPC Reachability Analyzer. It is the only tool that simulates the full ENI-to-ENI path including security groups, NACLs, route tables, and VPC endpoint policies in one call. Manual trace is slower and misses transitive issues. The analyzer charges $0.10 per analysis - cheaper than a 30-minute call with your network team.

If you cannot reproduce the failure consistently, the cause is probably a race condition or a session-cache issue. Run the call with --profile set to a fresh STS session, in a different region you control, with a single concurrent request. If it works there but fails in your normal setup, the difference is the bug.

When the fix involves a destructive operation (delete VPC endpoint, swap KMS key, rotate root credential), do it during a maintenance window with at least one teammate watching. Several Amazon S3 operations have implicit dependencies that only show up when traffic starts flowing again. Document the rollback path before you start, not during the incident.

Automate this fix so you do not do it twice

Automate the fix with Python and boto3

For anything you do more than twice, write a small Python script. The boto3 pattern below uses paginators (so it does not blow up on accounts with thousands of resources), explicit region binding, and a dry-run flag that defaults to True. Keep the script under 100 lines; if it grows beyond that, you are building a tool and should put it behind a Lambda with proper logging.

import boto3, sys
DRY_RUN = '--apply' not in sys.argv
client = boto3.client('s3', region_name='us-east-1')
paginator = client.get_paginator('describe_...')
for page in paginator.paginate(): for item in page.get('Items', []): if item.get('Status') == 'FAILED': if DRY_RUN: print(f'[dry-run] would fix {item["Id"]}') else: client.modify_...(ResourceId=item['Id']) print(f'fixed {item["Id"]}')

Wire the fix into EventBridge for self-healing

If the failure mode is recurring, automate the remediation instead of the diagnosis. EventBridge Scheduler or rules that watch CloudWatch Events for the specific error code can invoke a Lambda that runs the same fix you would run by hand. The Lambda must be idempotent (re-running it on already-healthy resources must be a no-op) and must emit a CloudWatch metric so you can track how often the auto-fix fires. A spike in auto-fix invocations is itself a signal worth alerting on.

# EventBridge rule pattern (JSON)
{ "source": ["aws.s3"], "detail-type": ["AWS API Call via CloudTrail"], "detail": { "errorCode": ["AccessDenied", "ThrottlingException"] }
}

Add a Systems Manager Automation runbook

For multi-step fixes that include a manual approval, use SSM Automation. Document the fix as a runbook with aws:approve steps where a human signs off and aws:executeAwsApi steps where the runbook calls the AWS API. Approvers are notified by SNS; the runbook execution shows up in CloudTrail with the approver's identity attached. This makes audit trails easy and stops production fixes from being one-person operations.

Common traps

The most common pitfall when fixing this on Amazon S3 is treating it as a one-off rather than as a recurring class of incident. The same misconfiguration tends to happen again after a deployment, a role rotation, or a region migration unless the fix is codified. Add a CloudFormation hook, Service Control Policy condition, or AWS Config rule that prevents the same misconfig from being introduced again. Documentation alone does not survive turnover.

Another common trap: confirming the fix on a single resource and assuming the fleet is healthy. Loop your check across every account, region, and IAM principal that could exhibit the same symptom. If you cannot enumerate the affected scope without a script, you do not yet understand the scope.

The repair

• Reproduce the original symptom path. If it still surfaces in any account or region or IAM role, you have not fixed it.
• Watch for 24 to 48 hours. AWS metrics and policy systems can mask issues with cached health for 6 to 12 hours, especially CloudFront and Route 53.
• Run a smoke test under realistic load. Happy-path tests miss race conditions and IAM session-cache issues.
• Capture the new state in a runbook so the next person on call does not have to rediscover this. Push it to Confluence or your team wiki, not into Slack.
• If the fix involved a permission change, run IAM Access Analyzer one more time to confirm you did not open a separate hole while closing this one.

Safety, rollback, blast radius

• Test in a non-production account if your environment has Control Tower or AWS Organizations. The cost of one sandbox account is cheaper than one rollback meeting.
• Export the existing config before changing it. Most Amazon S3 resources support describe + export to JSON via CLI - capture that to source control before you start.
• Know your rollback path. Some Amazon S3 operations are one-way (region migration, account-level feature opt-in, KMS key deletion past pending window). Confirm reversibility on the AWS doc before you commit.
• Be aware of cross-service impact. IAM role changes ripple to every service trusting that role. KMS key changes break every workload depending on that key. VPC endpoint changes affect every VPC consumer of that endpoint.
• Maintenance window discipline: if the change touches DNS, certificate rotation, or anything that emits TLS handshakes, line up a window with stakeholder notification, not a heroic mid-day swap.

FAQ

Related fixes

Related guides worth a look while you sort this one out:

• API Gateway CORS preflight 403 on OPTIONS mock integration setup
• API Gateway mTLS on REST API truststore S3 bucket and client cert
• Bedrock Knowledge Base sync failed S3 data source
• Fix CloudFront 403 Access Denied with S3 origin and OAC
• Comprehend PII redaction job S3 output access denied
• Comprehend training data S3 bucket cross-region access denied