How to use Compute Optimizer recommendations for EBS gp2 to gp3 migration

By Sai Kiran Pandrala · Last verified: 2026-05-31 · Source: community Q&A, AWS docs, AWS re:Post

Running into How to use Compute Optimizer recommendations for EBS gp2 to gp3 migration on AWS Compute Optimizer is one of the more searched issues on AWS re:Post and StackOverflow in the last 12 months. Here is what actually moves the needle when the AWS docs are too generic.

What how to use compute optimizer recommendations for ebs gp2 to gp3 migration actually involves on AWS Compute Optimizer

This task on Compute Optimizer is one of the more searched operational topics on AWS in the last 12 months. The procedure below is the path that works in a current AWS account with default IAM and standard VPC config.

The rest of this page is the structured fix path. Start with diagnose, then remediation, then the automation options so you do not have to do this by hand the next time it surfaces. Verify and safety sections at the end are the discipline that keeps the fix from regressing in production.

Diagnose first, fix second

Diff against last known good. The last config change you made is the cause about three quarters of the time, even when the change should not have mattered. Use AWS Config history (or your Terraform / CloudFormation drift report) to see the actual delta between the resource state when it worked and when it broke. The change you remember is often not the only change that happened.

Run aws sts get-caller-identity first. About one in five 'why does this not work' tickets are actually 'I am in the wrong account' or 'my session expired and the SDK is using stale creds'. The 5-second sanity check costs nothing and saves real time when the answer is that simple.

Check the AWS Health Dashboard at health.aws.amazon.com for ongoing service events in your region. About one in ten user-reported outages turn out to be region-scoped AWS service degradation already being tracked. AWS Health also exposes an API and EventBridge events, so you can wire a Lambda hook that pages on-call only when the failure correlates with an active AWS Health event in the same region and service.

Solution-focused remediation path

If networking is suspect, use VPC Reachability Analyzer. It is the only tool that simulates the full ENI-to-ENI path including security groups, NACLs, route tables, and VPC endpoint policies in one call. Manual trace is slower and misses transitive issues. The analyzer charges $0.10 per analysis - cheaper than a 30-minute call with your network team.

When the failure happens in production but not in dev, do not just compare the IAM policy. Compare the SCP / RCP at the OU level, the permission boundary on the role, and the resource-based policy on the target. One of those is almost always different between accounts. AWS Config conformance packs make this comparison routine.

If you cannot reproduce the failure consistently, the cause is probably a race condition or a session-cache issue. Run the call with --profile set to a fresh STS session, in a different region you control, with a single concurrent request. If it works there but fails in your normal setup, the difference is the bug.

Automate this fix so you do not do it twice

Automate the fix with the AWS CLI

The CLI one-liner pattern for AWS Compute Optimizer operations is roughly: aws compute describe-... --query ... to read state, aws compute modify-... --no-dry-run to apply the change, and aws compute describe-... --query ... again to verify. Wrap it in a shell script that sets a region variable at the top and exits on first error with set -euo pipefail so a partial run does not leave the account in a half-fixed state.

# Template - replace placeholders with your account specifics
export AWS_REGION=us-east-1
export AWS_PROFILE=prod
aws compute describe-... --query 'Resources[?Status==`FAILED`].[Id,Reason]' --output table
aws compute modify-... --resource-id RESOURCE_ID --no-dry-run
aws compute describe-... --resource-id RESOURCE_ID --query 'Status'

Automate the fix with Python and boto3

For anything you do more than twice, write a small Python script. The boto3 pattern below uses paginators (so it does not blow up on accounts with thousands of resources), explicit region binding, and a dry-run flag that defaults to True. Keep the script under 100 lines; if it grows beyond that, you are building a tool and should put it behind a Lambda with proper logging.

import boto3, sys
DRY_RUN = '--apply' not in sys.argv
client = boto3.client('compute', region_name='us-east-1')
paginator = client.get_paginator('describe_...')
for page in paginator.paginate(): for item in page.get('Items', []): if item.get('Status') == 'FAILED': if DRY_RUN: print(f'[dry-run] would fix {item["Id"]}') else: client.modify_...(ResourceId=item['Id']) print(f'fixed {item["Id"]}')

Add a Systems Manager Automation runbook

For multi-step fixes that include a manual approval, use SSM Automation. Document the fix as a runbook with aws:approve steps where a human signs off and aws:executeAwsApi steps where the runbook calls the AWS API. Approvers are notified by SNS; the runbook execution shows up in CloudTrail with the approver's identity attached. This makes audit trails easy and stops production fixes from being one-person operations.

Common pitfalls and what to watch for

A subtle pitfall on AWS Compute Optimizer is that the AWS Console and the SDK can disagree about resource state during a configuration change. Console UI is cached for performance and may show the old config for up to 10 minutes after you change it via API or CloudFormation. Always confirm with describe-* CLI calls during a change window, not with screenshots from the Console.

The other pitfall: assuming that an automated remediation is correct because it succeeded. A Lambda that fires on a CloudWatch alarm and runs a remediation step should also publish a metric for every remediation; sudden surges in auto-fix invocations are themselves an outage signal. Otherwise you can hide a slow-burn regression behind a quiet remediation loop for weeks.

Verify the fix worked

• Reproduce the original symptom path. If it still surfaces in any account or region or IAM role, you have not fixed it.
• Watch for 24 to 48 hours. AWS metrics and policy systems can mask issues with cached health for 6 to 12 hours, especially CloudFront and Route 53.
• Run a smoke test under realistic load. Happy-path tests miss race conditions and IAM session-cache issues.
• Capture the new state in a runbook so the next person on call does not have to rediscover this. Push it to Confluence or your team wiki, not into Slack.
• If the fix involved a permission change, run IAM Access Analyzer one more time to confirm you did not open a separate hole while closing this one.

Safety, rollback, blast radius

• Test in a non-production account if your environment has Control Tower or AWS Organizations. The cost of one sandbox account is cheaper than one rollback meeting.
• Export the existing config before changing it. Most AWS Compute Optimizer resources support describe + export to JSON via CLI - capture that to source control before you start.
• Know your rollback path. Some AWS Compute Optimizer operations are one-way (region migration, account-level feature opt-in, KMS key deletion past pending window). Confirm reversibility on the AWS doc before you commit.
• Be aware of cross-service impact. IAM role changes ripple to every service trusting that role. KMS key changes break every workload depending on that key. VPC endpoint changes affect every VPC consumer of that endpoint.
• Maintenance window discipline: if the change touches DNS, certificate rotation, or anything that emits TLS handshakes, line up a window with stakeholder notification, not a heroic mid-day swap.

FAQ

Related fixes

Related guides worth a look while you sort this one out:

• How to use Compute Optimizer for RDS instance recommendations
• How to export Compute Optimizer recommendations to S3 and Athena
• How to fix Insufficient data Compute Optimizer recommendations
• How to ignore Compute Optimizer recommendations that do not make sense
• How to use Compute Optimizer for Auto Scaling Groups
• How to use Compute Optimizer for ECS services on Fargate