Check Point: How to collect tech-support / diagnostic bundle

By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30

What this guide covers

How to collect tech-support / diagnostic bundle in the Check Point support ecosystem.

Full fix path

1. Run cpinfo -z -o /var/log/cpinfo.tgz.
2. Save output off the device via SCP / SFTP / TFTP.
3. Compress before uploading to support.
4. Attach to the case along with a clear symptom statement.

Useful URLs

• Support portal: https://support.checkpoint.com
• Open a case: https://supportcenter.checkpoint.com/supportcenter/portal/role/supportcenterUser/page/default.psml/media-type/html?action=portlets.WizardAction&new=true
• Bug / advisory search: https://supportcenter.checkpoint.com
• Knowledge base: https://support.checkpoint.com/results
• Security advisories (PSIRT): https://www.checkpoint.com/support-services/security-advisories/
• Warranty lookup: https://support.checkpoint.com

Frequently asked questions

Will this work on my specific Gaia OS / SmartConsole version?

The procedure reflects current Gaia OS / SmartConsole behaviour. Older releases may need minor syntax adjustments: use the CLI help (? or tab-completion) to verify.

Should I open a Check Point TAC case immediately?

Open one if you suspect hardware failure or the symptom persists after a maintenance-window reload. Make sure your support entitlement is active first.

Where can I find the Check Point official documentation?

https://support.checkpoint.com/results, search the product family + feature name.

Is this procedure safe in production?

Test in a lab or maintenance window first. Capture pre-change state so you can roll back.

Related guides

• All Check Point fix guides → /checkpoint/
• All vendor guides → /vendors/

References

• Check Point support portal: https://support.checkpoint.com
• Check Point knowledge base: https://support.checkpoint.com/results
• Check Point security advisories: https://www.checkpoint.com/support-services/security-advisories/
• Open a case: https://supportcenter.checkpoint.com/supportcenter/portal/role/supportcenterUser/page/default.psml/media-type/html?action=portlets.WizardAction&new=true

Reference material, not professional advice. Validate against your specific Gaia OS / SmartConsole version and test in a non-production environment before applying.

Why this matters for your day-to-day

A Check device that's misbehaving costs more than the fix itself: lost productivity, missed calls, security risk, even safety risk in some categories. Treating the symptom quickly with a documented procedure is cheaper than letting it persist. The steps above are written to get you back to working in under an hour where possible, and to flag clearly when escalation is the right call.

Safety + preconditions

Before any work on a Check device:

• Unplug from mains for any internal-access procedure.
• Discharge stored energy (capacitors in PSUs, residual battery charge) per manufacturer guidance.
• Use ESD-safe handling for boards and modules. no carpet, no wool sleeves.
• Avoid moisture; never apply liquids near vents or connectors.
• If you smell smoke, see scorch marks, or feel uneven heat, stop and escalate.

Confirm it stuck

On a Check device, the test is rarely "reboot and see". Use this list:

• Active reproduction: trigger the original failure path on purpose.
• Indirect reproduction: do an activity that would expose the same subsystem.
• Status indicator review: every LED / display / app status should be green.
• 24-hour soak: leave the device under normal load overnight; check the next morning.
• Telemetry check: review the device or app's diagnostic log for new error entries.

Escalation guide

For a Check device, the right escalation depends on impact:

• Cosmetic / minor: log a ticket via the Check app or web portal. Response 1-3 business days.
• Mid-impact: phone support. Have your serial number ready.
• Critical (production down, safety issue): in-person dealer / TAC visit. Bring proof of purchase.
• Out of warranty: third-party repair shop with manufacturer-certified technicians.

More frequently asked questions

Is it safe to apply during business hours?

If the device is in production use, apply during a scheduled maintenance window. Most procedures need 2-15 minutes of downtime. Capture pre-change state so you can roll back if needed.

How long does this fix usually take?

Most users complete the steps in 20-45 minutes the first time, and 5-10 minutes on subsequent runs once the menu paths are familiar.

Are there safer alternatives for non-technical users?

Yes, the manufacturer's self-service troubleshooter (HP Smart, LG ThinQ, Samsung Members, similar) usually walks through the same steps in a guided UI. Use that first if you're not comfortable with menu paths.

What if my model isn't exactly the same revision?

Cross-check the model code on the rating plate against the manufacturer support page. Major firmware generations sometimes shift the menu path; the option is usually under a similarly-named section.

How often should I run preventive checks?

Quarterly for most consumer devices; monthly for production / commercial devices. Set a calendar reminder so the device stays healthy between issues.

Field notes from real incidents on Check Point

When I work on Check Point: How to collect tech-support / diagnostic bundle the rhythm I lean on is the one I have built over years of these tickets, not a stack of generic advice. I never push a config change without a rollback timer; commit confirmed on Junos, archive on IOS, or a scripted timeout on EOS. Most spanning-tree storms I have walked into started with a user-side switch that nobody documented; topology audits pay off the day the loop forms.

Half the BGP weirdness I have triaged was a route-map that someone copied from a template without reading what it actually filtered. Counters lie if you do not clear them; clear counters, reproduce, and read the deltas, not the cumulative numbers. Show tech-support is the artifact TAC will ask for first: capture it before you change anything so the pre-change state is preserved.

Tools I actually reach for

For Check Point: How to collect tech-support / diagnostic bundle on Check Point the cheapest signal I can land usually comes from a known order of operations, not a kitchen-sink approach. I start with show platform hardware capacity because it is the lowest-friction way to confirm the failure is real and reproducible. If that returns ambiguous data, I escalate to show logging last 200, ping vrf <vrf> <target>, show running-config | include <feature>, and finally to show tech-support (capture for TAC) only when the cheaper tools cannot reach the layer the failure lives in. That ordering matches the failure surfaces I have actually seen on Check Point units over the last few years, not an abstract taxonomy. The cheap signals gate the expensive ones so the investigation does not balloon into a multi-hour exercise.

Verification I run before I close the ticket

Before I mark Check Point: How to collect tech-support / diagnostic bundle resolved on a Check Point unit, the verification loop below is what I actually run. Each step proves a different layer is green, and the order matters - the cheap checks gate the more expensive ones so I never burn an hour on a deep test that a shallow one would have failed in seconds.

show spanning-tree summary  # confirm topology stability

If that one comes back clean, move to the next check. If it does not, stop and dig in there before layering more verification on top of a red signal.

show interfaces <int> | include errors|drops|CRC

If that one comes back clean, move to the next check. If it does not, stop and dig in there before layering more verification on top of a red signal.

show bgp summary  # confirm session state after route changes

If that one comes back clean, move to the next check. If it does not, stop and dig in there before layering more verification on top of a red signal.

show ip route <prefix>  # confirm best path post-change

Only when every line above runs clean do I close the ticket and update the runbook with the timestamps. A green verification that nobody can reproduce is not a fix, it is luck waiting to regress.

Where I check first when the docs disagree

When two sources contradict each other on a Check Point detail, the disambiguation order I lean on is stable across products and across years. vendor TAC knowledge base is where I start for the ground-truth view. vendor official command reference (Cisco DocCD, Arista EOS Central, Juniper TechLibrary, etc.) is where I start for the ground-truth view. vendor release notes for the running software version is where I start for the ground-truth view. Random blog posts and reseller wikis are signal, not ground truth, and I treat them as such until the references above either confirm or contradict the claim. The cost of trusting an unauthoritative source on Check Point: How to collect tech-support / diagnostic bundle is rarely worth the time it saved.

Pitfalls I have walked into on this exact path

The shortcuts that look smart on Check Point: How to collect tech-support / diagnostic bundle have a habit of biting back. The pitfalls below are the ones I have personally walked into on a Check Point unit, not things I read about. Most spanning-tree storms I have walked into started with a user-side switch that nobody documented; topology audits pay off the day the loop forms. Half the BGP weirdness I have triaged was a route-map that someone copied from a template without reading what it actually filtered. Counters lie if you do not clear them; clear counters, reproduce, and read the deltas, not the cumulative numbers. When in doubt I revert to the slower path that the manual prescribes - the time I save by skipping it is always smaller than the time I spend cleaning up afterwards.

What I tell the next on-call

When I hand Check Point: How to collect tech-support / diagnostic bundle off to the next person on rotation, the three lines I leave in the runbook are these. First, the symptom signature on Check Point - not a paraphrase, the exact string that surfaces in logs or on the screen. Second, the diagnostic that gave the highest signal in the least time. Third, the exact verification command whose green output justified closing the ticket. That trio is what turns a one-off fix into a runbook entry the next engineer can use without paging me at three in the morning.

I also add a one-line note on the cost of getting this wrong. For Check Point: How to collect tech-support / diagnostic bundle on a Check Point unit, the cost is rarely the replacement part or the patch itself. It is the downtime, the second site visit, and the trust deficit you spend with whoever owns the asset when the fix does not hold. That framing keeps the next on-call from choosing the cheap-looking shortcut that ends up costing the most in elapsed hours and goodwill.

Related fixes

Related guides worth a look while you sort this one out:

• Check Point: How to check device end-of-life / end-of-support date
• Check Point: How to check warranty / support contract status
• Check Point: How to open a support case
• Check Point: How to renew support contract
• Check Point: How to transfer support to a new owner
• Best Check Point firewall for branch office