Dell: OSPF MTU mismatch

By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30

What this guide covers

Diagnose and fix OSPF MTU mismatch on a Dell device (Dell OS10 / SmartFabric OS).

Most likely cause + fix

Both routers must have identical MTU on the OSPF interface. Match them explicitly.

Diagnostic CLI

show interface status
# Use the Dell OS10 / SmartFabric OS equivalents of:
#   show ip route / show route
#   show ip bgp summary / show bgp summary
#   show ip ospf neighbor / show ospf neighbor
#   show log | include BGP|OSPF

When the issue persists

• Capture show tech-support | save tftp://10.10.1.100/tech.txt and open a Dell ProSupport case.
• Cross-reference https://www.dell.com/support/manuals/ for known issues in your release.

Frequently asked questions

Will this work on my specific Dell OS10 / SmartFabric OS version?

The procedure reflects current Dell OS10 / SmartFabric OS behaviour. Older releases may need minor syntax adjustments. use the CLI help (? or tab-completion) to verify.

Should I open a Dell ProSupport case immediately?

Open one if you suspect hardware failure or the symptom persists after a maintenance-window reload. Make sure your support entitlement is active first.

Where can I find the Dell official documentation?

https://www.dell.com/support/kbdoc, search the product family + feature name.

Is this procedure safe in production?

Test in a lab or maintenance window first. Capture pre-change state so you can roll back.

Related guides

• All Dell fix guides → /dell/
• All vendor guides → /vendors/

Related fixes

Related guides worth a look while you sort this one out:

• Dell: OSPF duplicate router-id
• Dell: OSPF neighbor stuck ExStart
• Dell Switch Port auto-negotiation mismatch (speed / duplex): How to Fix
• Best Dell switch for branch office
• Best Dell switch for enterprise data centre
• Best Dell switch for retail store

References

• Dell support portal: https://www.dell.com/support
• Dell knowledge base: https://www.dell.com/support/kbdoc
• Dell security advisories: https://www.dell.com/support/security
• Open a case: https://www.dell.com/support/incidents-online

Reference material, not professional advice. Validate against your specific Dell OS10 / SmartFabric OS version and test in a non-production environment before applying.

What changed recently?

Fault diagnosis on a Dell: device goes faster when you map the symptom to a recent change:

• Did firmware update in the last 7 days?
• Did the network (router, ISP, VPN) change?
• Was the device moved physically?
• Did paired devices (phone, hub, app) update?
• Were any accessories swapped in or out?

The answer narrows the root cause to a manageable subset.

Safety + preconditions

Before any work on a Dell: device:

• Unplug from mains for any internal-access procedure.
• Discharge stored energy (capacitors in PSUs, residual battery charge) per manufacturer guidance.
• Use ESD-safe handling for boards and modules: no carpet, no wool sleeves.
• Avoid moisture; never apply liquids near vents or connectors.
• If you smell smoke, see scorch marks, or feel uneven heat, stop and escalate.

How to confirm it's actually fixed

On a Dell: device, the test is rarely "reboot and see". Use this list:

• Active reproduction: trigger the original failure path on purpose.
• Indirect reproduction: do an activity that would expose the same subsystem.
• Status indicator review: every LED / display / app status should be green.
• 24-hour soak: leave the device under normal load overnight; check the next morning.
• Telemetry check: review the device or app's diagnostic log for new error entries.

When to call Dell: support instead

Escalate if:

• The same symptom returns within 24 hours of a clean fix.
• You see physical damage (burn marks, swollen battery, cracked PCB).
• The device is in warranty and a hardware replacement is the cheaper outcome.
• Repair requires specialised tools you don't own (alignment jigs, calibration software).
• Following the official path keeps the warranty intact, which matters more than the time spent.

More frequently asked questions

Can I roll this back if something breaks?

Yes for software-level changes (firmware rollback, config rollback). Hardware changes are usually one-way. Always back up settings before starting.

Will this void my warranty?

Applying official firmware updates and following the user manual will not affect warranty. Opening sealed components, jumping safety circuits, or using third-party parts can void warranty in most jurisdictions.

What if my model isn't exactly the same revision?

Cross-check the model code on the rating plate against the manufacturer support page. Major firmware generations sometimes shift the menu path; the option is usually under a similarly-named section.

Is it safe to apply during business hours?

If the device is in production use, apply during a scheduled maintenance window. Most procedures need 2-15 minutes of downtime. Capture pre-change state so you can roll back if needed.

Why is this happening on a brand-new unit?

Out-of-box defects do occur. If you've owned the device under 30 days and the symptom persists after a factory reset, escalate to the seller for replacement under DOA terms before opening a manufacturer support case.