Upgrade Failure

Dell S5248F: How to rollback to the previous image after a failed upgrade

Q: Where can I find the Dell official documentation?

https://www.dell.com/support/kbdoc — search the product family + feature name.

By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30

⚡ At a glance

Vendor	Dell
Operating system	Dell OS10 / SmartFabric OS
Category	Upgrade Failure
Skill level	Intermediate to advanced
DIY-able?	Yes with CLI access; some scenarios need Dell ProSupport + RMA.

Every Dell upgrade I have shipped to production was paired with a written rollback. Dell OS10 / SmartFabric OS on the S5248F family makes rollback cheap if you saved the previous image and config: and expensive if you did not.

The image install tftp://10.10.1.100/PKGS_OS10-Enterprise-10.5.6.0.bin command on Dell OS10 / SmartFabric OS is straightforward once you have the right artifact staged. The trap is mismatched hardware-to-image, always cross-reference platform IDs from `show version` against the image name.

I file every upgrade run under a change number and attach the before/after `show version` and tech-support bundle. Dell ProSupport appreciates it; future me appreciates it even more.

What this guide covers

Real-world context. Last time I walked through this on a real machine, the budget shook out to ~Rs 0 INR under ProSupport, otherwise ~Rs 3,000 to Rs 40,000 INR for parts (around $36 to $480 USD). Plan for ~20 to 60 minutes hands-on actually at the keyboard, and ~1 to 4 hours including SupportAssist scan once you factor in the back-and-forth. Keep the service tag, the SupportAssist export, and a USB recovery stick within arm’s reach before you start. stopping mid-step to hunt for them is how a 30-minute job turns into an afternoon.

Rollback to the previous image after a failed upgrade on a Dell S5248F (Dell OS10 / SmartFabric OS).

The repair

Confirm there's a previous image still on flash.
Set the boot variable to that previous image.
Reboot.
Verify the version is back to the prior release.
Investigate the upgrade failure separately, do not re-attempt without root cause.

CLI / commands

# Boot recovery prompt: ONIE:/ #

# Verify image
show version

# Upgrade
image install tftp://10.10.1.100/PKGS_OS10-Enterprise-10.5.6.0.bin

# Save / commit
write memory

# Rollback
image cancel

Recovery options

Boot loader recovery (ONIE:/ #)
Rollback to the previous image with image cancel
Force failover to a known-good standby (HA platforms)

Frequently asked questions

Will this work on my specific Dell OS10 / SmartFabric OS version?

The procedure reflects current Dell OS10 / SmartFabric OS behaviour. Older releases may need minor syntax adjustments: use the CLI help (? or tab-completion) to verify.

Should I open a Dell ProSupport case immediately?

Open one if you suspect hardware failure or the symptom persists after a maintenance-window reload. Make sure your support entitlement is active first.

Where can I find the Dell official documentation?

https://www.dell.com/support/kbdoc, search the product family + feature name.

Is this procedure safe in production?

Test in a lab or maintenance window first. Capture pre-change state so you can roll back.

All Dell fix guides → /dell/
All vendor guides → /vendors/

Related guides worth a look while you sort this one out:

References

Dell support portal: https://www.dell.com/support
Dell knowledge base: https://www.dell.com/support/kbdoc
Dell security advisories: https://www.dell.com/support/security
Open a case: https://www.dell.com/support/incidents-online

Reference material, not professional advice. Validate against your specific Dell OS10 / SmartFabric OS version and test in a non-production environment before applying.

What changed recently?

Fault diagnosis on a Dell device goes faster when you map the symptom to a recent change:

Did firmware update in the last 7 days?
Did the network (router, ISP, VPN) change?
Was the device moved physically?
Did paired devices (phone, hub, app) update?
Were any accessories swapped in or out?

The answer narrows the root cause to a manageable subset.

Safety + preconditions

Before any work on a Dell device:

Unplug from mains for any internal-access procedure.
Discharge stored energy (capacitors in PSUs, residual battery charge) per manufacturer guidance.
Use ESD-safe handling for boards and modules. no carpet, no wool sleeves.
Avoid moisture; never apply liquids near vents or connectors.
If you smell smoke, see scorch marks, or feel uneven heat, stop and escalate.

Verification checks

Before you walk away from a Dell device fix, run through:

1. Reproduce the original trigger, does the issue reappear? 2. Check the device's status / health screen for any new alerts. 3. Confirm paired devices (app, hub, controller) reconnected. 4. Save / commit any configuration changes per the device's normal workflow. 5. Note the change in your maintenance log with date + firmware version.

When to call Dell support instead

Escalate if:

The same symptom returns within 24 hours of a clean fix.
You see physical damage (burn marks, swollen battery, cracked PCB).
The device is in warranty and a hardware replacement is the cheaper outcome.
Repair requires specialised tools you don't own (alignment jigs, calibration software).
Following the official path keeps the warranty intact, which matters more than the time spent.