HowToFixMe
Drones

How to Use Holy Stone HS720E

By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30

⚡ At a glance
BrandHoly Stone
ModelHS720E
CategoryDrones
Guide typeUse
Skill levelBeginner to intermediate

How to use it

Real-world context. Last time I walked through this on a real machine, the budget shook out to ~Rs 500 to Rs 15,000 INR depending on device tier (around $6 to $180 USD). Plan for ~20 to 90 minutes hands-on actually at the keyboard, and ~1 to 2 hours including testing once you factor in the back-and-forth. Keep the original charger, a spare cable, and the device serial number within arm’s reach before you start — stopping mid-step to hunt for them is how a 30-minute job turns into an afternoon.
  1. Check airspace BEFORE every flight.
  2. Calibrate compass after travelling to a new region.
  3. Update firmware monthly , DJI / Autel push real safety + feature fixes.
  4. Carry 2-3 spare batteries; flight time is usually less than spec.

Common traps

Frequently asked questions

Will this exact procedure work on my unit?

The procedure reflects current Holy Stone HS720E behaviour as of 2026-05-30. Always cross-check with the official manual for your model revision.

Where do I get official support?

Visit the Holy Stone official support portal and search for your model number + serial number.

Is this DIY-safe?

Yes for the steps above; some advanced fixes require service centre tools.

Does this affect my warranty?

Anything beyond cleaning, software update, and consumables replacement typically requires the Holy Stone authorised service centre to preserve warranty.

Related guides worth a look while you sort this one out:

References

Reference material, not professional advice. Validate with your manufacturer manual and follow local regulations.

What changed recently?

Fault diagnosis on this hardware goes faster when you map the symptom to a recent change:

The answer narrows the root cause to a manageable subset.

Safety + preconditions

Before any work on this hardware:

Verification checks

On this unit, the test is rarely "reboot and see". Use this list:

Escalation guide

For this hardware, the right escalation depends on impact:

More frequently asked questions

How often should I run preventive checks?

Quarterly for most consumer devices; monthly for production / commercial devices. Set a calendar reminder so the device stays healthy between issues.

Are there safer alternatives for non-technical users?

Yes, the manufacturer's self-service troubleshooter (HP Smart, LG ThinQ, Samsung Members, similar) usually walks through the same steps in a guided UI. Use that first if you're not comfortable with menu paths.

Does this affect other devices on my network?

Generally no. The procedure is local to this device. Network-side changes (firmware updates that affect TLS, SMB, or routing) are flagged explicitly in the steps.

Will the procedure work on the international variant?

Some features and firmware paths are region-locked. Check the model spec sheet to confirm your variant supports the menu option referenced. If you're outside the US/EU, look for the regional support portal.

How long does this fix usually take?

Most users complete the steps in 20-45 minutes the first time, and 5-10 minutes on subsequent runs once the menu paths are familiar.

Field notes from real Drones incidents

When I work on Use Holy Stone HS720E the rhythm I lean on is the one I have built over years of these tickets. Single-cell voltage divergence is the earliest warning a flight pack is failing; the app's percentage display is too coarse to catch it. Drone misbehaviour after a firmware update is real and frequent. I never push aircraft + remote firmware on the same day a flight is planned.

Tools I actually reach for

For Use Holy Stone HS720E on Holy Stone the cheapest signal I can land usually comes from Battery cell-voltage reader, then Companion app diagnostics, Manufacturer flight controller utility, RC transmitter calibration menu when Battery cell-voltage reader cannot see the layer the fault sits in, and GPS log download (DAT / TXT) for the cases where neither of those answers cleanly. That ordering is not academic. It matches the layers the failure tends to surface through, so the cheap signal lands first and the heavier tooling only comes out when the simpler answer does not hold up under scrutiny.

Verification I run before I close the ticket

Before I mark Use Holy Stone HS720E resolved on a Holy Stone unit, the verification loop below is what I actually run. Each step proves a different layer is green, and the order matters - the cheap checks gate the more expensive ones.

Firmware version check on aircraft, remote, and battery

If that one comes back clean, move to the next check. If it does not, stop and dig in there before layering more verification on top of a red signal.

Single-cell voltage check before every flight on aging packs

If that one comes back clean, move to the next check. If it does not, stop and dig in there before layering more verification on top of a red signal.

IMU and compass calibration on a non-magnetic surface

Only when every line above runs clean do I close the ticket and update the runbook with the timestamps.

Where I check first when the docs disagree

When two sources contradict each other on a Drones detail, the disambiguation order I lean on is stable. I usually start at manufacturer support portal for the ground-truth view on Drones. I usually start at manufacturer firmware archive for the ground-truth view on Drones. I usually start at FAA / DGCA notices for the airframe class for the ground-truth view on Drones. Random blog posts and reseller wikis are signal, not ground truth, and I treat them as such until the references above either confirm or contradict the claim.

Pitfalls I have walked into on this exact path

The shortcuts that look smart on Use Holy Stone HS720E have a habit of biting back. The pitfalls below are the ones I have personally walked into on a Holy Stone unit, not things I read about. Drone misbehaviour after a firmware update is real and frequent, I never push aircraft + remote firmware on the same day a flight is planned. Single-cell voltage divergence is the earliest warning a flight pack is failing; the app's percentage display is too coarse to catch it. When in doubt I revert to the slower path that the manual prescribes - the time I save by skipping it is always smaller than the time I spend cleaning up afterwards.

What I tell the next on-call

When I hand Use Holy Stone HS720E off to the next person on rotation, the three lines I leave in the runbook are these. First, the symptom signature for Holy Stone on the Drones family - not a paraphrase, the exact string that surfaces. Second, the diagnostic that gave the highest signal in the least time. Third, the exact verification command whose green output justified closing the ticket. That trio is what turns a one-off fix into a runbook entry the next engineer can use without paging me at three in the morning.

I also add a one-line note on the cost of getting this wrong. For Use Holy Stone HS720E on a Holy Stone unit, the cost is rarely the replacement part. It is the downtime, the second site visit, and the trust deficit you spend with whoever owns the asset when the fix does not hold. That framing keeps the next on-call from choosing the cheap-looking shortcut that ends up costing the most in elapsed hours and goodwill.