Routing Issues

Extreme Networks: BGP neighbor stuck Active

Q: Where can I find the Extreme Networks official documentation?

https://extremeportal.force.com/ExtrArticleLanding — search the product family + feature name.

By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30

⚡ At a glance

Vendor	Extreme Networks
Operating system	EXOS / Switch Engine / VOSS
Category	Routing Issues
Skill level	Intermediate to advanced
DIY-able?	Yes with CLI access; some scenarios need Extreme GTAC + RMA.

What this guide covers

Real-world context. Cost envelope: ~Rs 0 INR under Extreme support, otherwise ~Rs 5,000 to Rs 80,000 INR for parts (around $60 to $960 USD). Time at the keyboard: ~20 to 60 minutes triage. Time end-to-end including verification: ~1 to 4 hours including failback. Have the switch serial, an EXOS config backup, and console access staged before the first command so you do not stall on missing inputs.

Diagnose and fix BGP neighbor stuck Active on a Extreme Networks device (EXOS / Switch Engine / VOSS).

Most likely cause + fix

TCP SYN sent, no SYN-ACK back. Firewall blocking TCP 179, BGP not configured on the remote side, or wrong source IP.

Diagnostic CLI

show ports info
# Use the EXOS / Switch Engine / VOSS equivalents of:
#   show ip route / show route
#   show ip bgp summary / show bgp summary
#   show ip ospf neighbor / show ospf neighbor
#   show log | include BGP|OSPF

When the issue persists

Capture show tech-support and open a Extreme GTAC case.
Cross-reference https://gtacknowledge.extremenetworks.com/ for known issues in your release.

Frequently asked questions

Will this work on my specific EXOS / Switch Engine / VOSS version?

The procedure reflects current EXOS / Switch Engine / VOSS behaviour. Older releases may need minor syntax adjustments, use the CLI help (? or tab-completion) to verify.

Should I open a Extreme GTAC case immediately?

Open one if you suspect hardware failure or the symptom persists after a maintenance-window reload. Make sure your support entitlement is active first.

Where can I find the Extreme Networks official documentation?

https://extremeportal.force.com/ExtrArticleLanding: search the product family + feature name.

Is this procedure safe in production?

Test in a lab or maintenance window first. Capture pre-change state so you can roll back.

All Extreme Networks fix guides → /extreme/
All vendor guides → /vendors/

Related guides worth a look while you sort this one out:

References

Extreme Networks support portal: https://www.extremenetworks.com/support/
Extreme Networks knowledge base: https://extremeportal.force.com/ExtrArticleLanding
Extreme Networks security advisories: https://www.extremenetworks.com/support/policies/product-security
Open a case: https://extr.co/3ZxQDt9

Reference material, not professional advice. Validate against your specific EXOS / Switch Engine / VOSS version and test in a non-production environment before applying.

What changed recently?

Fault diagnosis on a Extreme device goes faster when you map the symptom to a recent change:

Did firmware update in the last 7 days?
Did the network (router, ISP, VPN) change?
Was the device moved physically?
Did paired devices (phone, hub, app) update?
Were any accessories swapped in or out?

The answer narrows the root cause to a manageable subset.

Before you start

A few things to confirm so the Extreme device fix goes cleanly:

Latest firmware downloaded if you're going to update.
Warranty + support contract status checked, opening sealed parts may void it.
Backup of current configuration (where applicable) taken.
Spare parts on hand if you anticipate replacement.
Adequate workspace, lighting, and time. rushing causes regressions.

How to confirm it's actually fixed

On a Extreme device, the test is rarely "reboot and see". Use this list:

Active reproduction: trigger the original failure path on purpose.
Indirect reproduction: do an activity that would expose the same subsystem.
Status indicator review: every LED / display / app status should be green.
24-hour soak: leave the device under normal load overnight; check the next morning.
Telemetry check: review the device or app's diagnostic log for new error entries.

When to call Extreme support instead

Escalate if:

The same symptom returns within 24 hours of a clean fix.
You see physical damage (burn marks, swollen battery, cracked PCB).
The device is in warranty and a hardware replacement is the cheaper outcome.
Repair requires specialised tools you don't own (alignment jigs, calibration software).
Following the official path keeps the warranty intact, which matters more than the time spent.