HowToFixMe
IP / Network Issue

Extreme Networks switch: DHCP relay not forwarding

By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30

⚡ At a glance
VendorExtreme Networks
Operating systemEXOS / Switch Engine / VOSS
CategoryIP / Network Issue
Skill levelIntermediate to advanced
DIY-able?Yes with CLI access; some scenarios need Extreme GTAC + RMA.

What this guide covers

Real-world context. Budget honestly for ~Rs 0 INR under Extreme support, otherwise ~Rs 5,000 to Rs 80,000 INR for parts (around $60 to $960 USD), because the cheap path looks tempting until a part shows up wrong. You will burn ~20 to 60 minutes triage hands-on and roughly ~1 to 4 hours including failback once verification is done. Before you touch anything, line up the switch serial, an EXOS config backup, and console access, those three are what saves you when the first attempt does not stick.

Fix DHCP relay not forwarding on a Extreme Networks switch.

Step-by-step

  1. Confirm the helper-address / relay-IP is configured.
  2. Ensure the DHCP server IS reachable from the relay.
  3. Verify no ACL is blocking UDP 67/68.
  4. Capture relay traffic to confirm where it stops.

CLI / commands

show ports info
show ports 1 description
show slot

When the issue persists

Frequently asked questions

Will this work on my specific EXOS / Switch Engine / VOSS version?

The procedure reflects current EXOS / Switch Engine / VOSS behaviour. Older releases may need minor syntax adjustments. use the CLI help (? or tab-completion) to verify.

Should I open a Extreme GTAC case immediately?

Open one if you suspect hardware failure or the symptom persists after a maintenance-window reload. Make sure your support entitlement is active first.

Where can I find the Extreme Networks official documentation?

https://extremeportal.force.com/ExtrArticleLanding, search the product family + feature name.

Is this procedure safe in production?

Test in a lab or maintenance window first. Capture pre-change state so you can roll back.

Related guides worth a look while you sort this one out:

References

Reference material, not professional advice. Validate against your specific EXOS / Switch Engine / VOSS version and test in a non-production environment before applying.

What changed recently?

Fault diagnosis on a Extreme device goes faster when you map the symptom to a recent change:

The answer narrows the root cause to a manageable subset.

Before you start

A few things to confirm so the Extreme device fix goes cleanly:

Verification checklist

After applying the fix on your Extreme device, confirm:

When to call Extreme support instead

Escalate if:

More frequently asked questions

Can I roll this back if something breaks?

Yes for software-level changes (firmware rollback, config rollback). Hardware changes are usually one-way. Always back up settings before starting.

Will this void my warranty?

Applying official firmware updates and following the user manual will not affect warranty. Opening sealed components, jumping safety circuits, or using third-party parts can void warranty in most jurisdictions.

Does this affect other devices on my network?

Generally no. The procedure is local to this device. Network-side changes (firmware updates that affect TLS, SMB, or routing) are flagged explicitly in the steps.

Will the procedure work on the international variant?

Some features and firmware paths are region-locked. Check the model spec sheet to confirm your variant supports the menu option referenced. If you're outside the US/EU, look for the regional support portal.

Why is this happening on a brand-new unit?

Out-of-box defects do occur. If you've owned the device under 30 days and the symptom persists after a factory reset, escalate to the seller for replacement under DOA terms before opening a manufacturer support case.