IP / Network Issue

Forcepoint firewall: asymmetric routing detected

Q: Where can I find the Forcepoint official documentation?

https://support.forcepoint.com — search the product family + feature name.

By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30

⚡ At a glance

Vendor	Forcepoint
Operating system	Forcepoint NGFW / Security Manager Console
Category	IP / Network Issue
Skill level	Intermediate to advanced
DIY-able?	Yes with CLI access; some scenarios need Forcepoint Customer Hub + RMA.

What this guide covers

Real-world context. Cost envelope: ~Rs 0 INR under Forcepoint support, otherwise ~Rs 5,000 to Rs 80,000 INR for parts (around $60 to $960 USD). Time at the keyboard: ~20 to 60 minutes triage. Time end-to-end including verification: ~1 to 4 hours including failback. Have the appliance serial, a config backup, and admin access staged before the first command so you do not stall on missing inputs.

Fix asymmetric routing detected on a Forcepoint firewall.

Step-by-step

Stateful firewall sees TCP packets in only one direction.
Identify the asymmetric leg via traceroute from each direction.
Fix with policy-based routing or by collapsing to a single egress.

CLI / commands

SMC → Engine → Interfaces
SMC → Engine → Tools → Show Interface
SMC → Diagnostic

When the issue persists

Open a Forcepoint Customer Hub case with the tech-support bundle.
Provide the timeline + recent changes.

Frequently asked questions

Will this work on my specific Forcepoint NGFW / Security Manager Console version?

The procedure reflects current Forcepoint NGFW / Security Manager Console behaviour. Older releases may need minor syntax adjustments. use the CLI help (? or tab-completion) to verify.

Should I open a Forcepoint Customer Hub case immediately?

Open one if you suspect hardware failure or the symptom persists after a maintenance-window reload. Make sure your support entitlement is active first.

Where can I find the Forcepoint official documentation?

https://support.forcepoint.com, search the product family + feature name.

Is this procedure safe in production?

Test in a lab or maintenance window first. Capture pre-change state so you can roll back.

All Forcepoint fix guides → /forcepoint/
All vendor guides → /vendors/

Related guides worth a look while you sort this one out:

References

Forcepoint support portal: https://support.forcepoint.com
Forcepoint knowledge base: https://support.forcepoint.com
Forcepoint security advisories: https://www.forcepoint.com/trust/security-advisories
Open a case: https://support.forcepoint.com

Reference material, not professional advice. Validate against your specific Forcepoint NGFW / Security Manager Console version and test in a non-production environment before applying.

Why this matters for your day-to-day

A Forcepoint device that's misbehaving costs more than the fix itself: lost productivity, missed calls, security risk, even safety risk in some categories. Treating the symptom quickly with a documented procedure is cheaper than letting it persist. The steps above are written to get you back to working in under an hour where possible, and to flag clearly when escalation is the right call.

Safety + preconditions

Before any work on a Forcepoint device:

Unplug from mains for any internal-access procedure.
Discharge stored energy (capacitors in PSUs, residual battery charge) per manufacturer guidance.
Use ESD-safe handling for boards and modules: no carpet, no wool sleeves.
Avoid moisture; never apply liquids near vents or connectors.
If you smell smoke, see scorch marks, or feel uneven heat, stop and escalate.

Verification checklist

After applying the fix on your Forcepoint device, confirm:

The original symptom is no longer reproducible.
Related features (status LEDs, app sync, paired accessories) still work.
The device responds to a soft reboot without the fault returning.
Any error codes that were on display have cleared.
Documentation (your service log, the brand companion app) reflects the change.

When to call Forcepoint support instead

Escalate if:

The same symptom returns within 24 hours of a clean fix.
You see physical damage (burn marks, swollen battery, cracked PCB).
The device is in warranty and a hardware replacement is the cheaper outcome.
Repair requires specialised tools you don't own (alignment jigs, calibration software).
Following the official path keeps the warranty intact, which matters more than the time spent.