Forcepoint NGFW N350 vs Check Point: How to Choose
By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30
| Vendor | Forcepoint |
|---|---|
| Operating system | Forcepoint NGFW / Security Manager Console |
| Category | Alternatives |
| Skill level | Intermediate to advanced |
| DIY-able? | Yes with CLI access; some scenarios need Forcepoint Customer Hub + RMA. |
Quick comparison
Compare Forcepoint NGFW N350 against Check Point on price, ecosystem, support tier, and your existing team skill set.
Decision criteria
| Criterion | Why it matters |
|---|---|
| Existing skills | Your team's training is a sunk cost; switching vendors carries a re-training tax. |
| TCO over 5 years | Hardware + licenses + support + training + power. |
| Ecosystem fit | Controllers, cloud management, APIs: does it integrate with what you already run? |
| Support / RMA | Tier-1 vendors have predictable 24x7 TAC; smaller vendors vary by region. |
| Compliance | If your regulator names a specific vendor, comparison ends there. |
| Feature parity | Some vendor-specific features (SDN fabric, telemetry) don't have direct equivalents. |
When to stay with Forcepoint
- Standardisation across enterprise.
- Forcepoint Customer Hub + RMA matters for your SLAs.
- Existing investment in Forcepoint management / fabric.
When to switch to Check Point
- Forcepoint refresh quote is 2-3x the alternative for the same use case.
- Your team is already strong on the alternative vendor.
- The alternative's cloud-managed / SaaS architecture is the goal.
Frequently asked questions
Will this work on my specific Forcepoint NGFW / Security Manager Console version?
The procedure reflects current Forcepoint NGFW / Security Manager Console behaviour. Older releases may need minor syntax adjustments, use the CLI help (? or tab-completion) to verify.
Should I open a Forcepoint Customer Hub case immediately?
Open one if you suspect hardware failure or the symptom persists after a maintenance-window reload. Make sure your support entitlement is active first.
Where can I find the Forcepoint official documentation?
https://support.forcepoint.com. search the product family + feature name.
Is this procedure safe in production?
Test in a lab or maintenance window first. Capture pre-change state so you can roll back.
Related guides
- All Forcepoint fix guides → /forcepoint/
- All vendor guides → /vendors/
Related fixes
Related guides worth a look while you sort this one out:
- Forcepoint NGFW N1100 vs Check Point: How to Choose
- Forcepoint NGFW N120 vs Check Point: How to Choose
- Forcepoint NGFW N2100 vs Check Point: How to Choose
- Forcepoint NGFW N350 all ports dead: Diagnose & Fix
- Forcepoint NGFW N350: How to back up configs nightly to a Git repo
- Forcepoint NGFW N350: How to deploy with a Python script (paramiko / netmiko / native API)
References
- Forcepoint support portal: https://support.forcepoint.com
- Forcepoint knowledge base: https://support.forcepoint.com
- Forcepoint security advisories: https://www.forcepoint.com/trust/security-advisories
- Open a case: https://support.forcepoint.com
Reference material, not professional advice. Validate against your specific Forcepoint NGFW / Security Manager Console version and test in a non-production environment before applying.
What changed recently?
Fault diagnosis on a Forcepoint device goes faster when you map the symptom to a recent change:
- Did firmware update in the last 7 days?
- Did the network (router, ISP, VPN) change?
- Was the device moved physically?
- Did paired devices (phone, hub, app) update?
- Were any accessories swapped in or out?
The answer narrows the root cause to a manageable subset.
Safety + preconditions
Before any work on a Forcepoint device:
- Unplug from mains for any internal-access procedure.
- Discharge stored energy (capacitors in PSUs, residual battery charge) per manufacturer guidance.
- Use ESD-safe handling for boards and modules, no carpet, no wool sleeves.
- Avoid moisture; never apply liquids near vents or connectors.
- If you smell smoke, see scorch marks, or feel uneven heat, stop and escalate.
Verification checklist
After applying the fix on your Forcepoint device, confirm:
- The original symptom is no longer reproducible.
- Related features (status LEDs, app sync, paired accessories) still work.
- The device responds to a soft reboot without the fault returning.
- Any error codes that were on display have cleared.
- Documentation (your service log, the brand companion app) reflects the change.
Escalation guide
For a Forcepoint device, the right escalation depends on impact:
- Cosmetic / minor: log a ticket via the Forcepoint app or web portal. Response 1-3 business days.
- Mid-impact: phone support. Have your serial number ready.
- Critical (production down, safety issue): in-person dealer / TAC visit. Bring proof of purchase.
- Out of warranty: third-party repair shop with manufacturer-certified technicians.
More frequently asked questions
How long does this fix usually take?
Most users complete the steps in 20-45 minutes the first time, and 5-10 minutes on subsequent runs once the menu paths are familiar.
Why is this happening on a brand-new unit?
Out-of-box defects do occur. If you've owned the device under 30 days and the symptom persists after a factory reset, escalate to the seller for replacement under DOA terms before opening a manufacturer support case.
Does this affect other devices on my network?
Generally no. The procedure is local to this device. Network-side changes (firmware updates that affect TLS, SMB, or routing) are flagged explicitly in the steps.
Is it safe to apply during business hours?
If the device is in production use, apply during a scheduled maintenance window. Most procedures need 2-15 minutes of downtime. Capture pre-change state so you can roll back if needed.
How often should I run preventive checks?
Quarterly for most consumer devices; monthly for production / commercial devices. Set a calendar reminder so the device stays healthy between issues.