Forcepoint: How to enable NETCONF or vendor API over SSH
By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30
| Vendor | Forcepoint |
|---|---|
| Operating system | Forcepoint NGFW / Security Manager Console |
| Category | Hardening & Safe Protocols |
| Skill level | Intermediate to advanced |
| DIY-able? | Yes with CLI access; some scenarios need Forcepoint Customer Hub + RMA. |
What this guide covers
How to enable NETCONF or vendor API over SSH on Forcepoint devices (Forcepoint NGFW / Security Manager Console).
Recommendation
Modern automation needs API access. Enable NETCONF / vendor API only over SSH or TLS.
CLI / commands
# Entered from: SMC engine config
SMC → Edit Engine → Interfaces → IP
# Save / commit
SMC: Save & Refresh policy
Verify
- Test from a non-admin workstation.
- Confirm fallback works if AAA or external service is down.
- Document the change in your CMDB / change-control.
Frequently asked questions
Will this work on my specific Forcepoint NGFW / Security Manager Console version?
The procedure reflects current Forcepoint NGFW / Security Manager Console behaviour. Older releases may need minor syntax adjustments. use the CLI help (? or tab-completion) to verify.
Should I open a Forcepoint Customer Hub case immediately?
Open one if you suspect hardware failure or the symptom persists after a maintenance-window reload. Make sure your support entitlement is active first.
Where can I find the Forcepoint official documentation?
https://support.forcepoint.com, search the product family + feature name.
Is this procedure safe in production?
Test in a lab or maintenance window first. Capture pre-change state so you can roll back.
Related guides
- All Forcepoint fix guides → /forcepoint/
- All vendor guides → /vendors/
Related fixes
Related guides worth a look while you sort this one out:
- Forcepoint: How to enable control-plane policing / rate-limiting
- Forcepoint: How to enable HTTPS-only management
- Forcepoint: How to enable management ACL to lock down access
- Forcepoint: How to replace Telnet with SSH
- Forcepoint NGFW N1100: How to deploy with a Python script (paramiko / netmiko / native API)
- Forcepoint NGFW N120: How to deploy with a Python script (paramiko / netmiko / native API)
References
- Forcepoint support portal: https://support.forcepoint.com
- Forcepoint knowledge base: https://support.forcepoint.com
- Forcepoint security advisories: https://www.forcepoint.com/trust/security-advisories
- Open a case: https://support.forcepoint.com
Reference material, not professional advice. Validate against your specific Forcepoint NGFW / Security Manager Console version and test in a non-production environment before applying.
Why this matters for your day-to-day
A Forcepoint: device that's misbehaving costs more than the fix itself: lost productivity, missed calls, security risk, even safety risk in some categories. Treating the symptom quickly with a documented procedure is cheaper than letting it persist. The steps above are written to get you back to working in under an hour where possible, and to flag clearly when escalation is the right call.
Safety + preconditions
Before any work on a Forcepoint: device:
- Unplug from mains for any internal-access procedure.
- Discharge stored energy (capacitors in PSUs, residual battery charge) per manufacturer guidance.
- Use ESD-safe handling for boards and modules: no carpet, no wool sleeves.
- Avoid moisture; never apply liquids near vents or connectors.
- If you smell smoke, see scorch marks, or feel uneven heat, stop and escalate.
Quick verification
Before you walk away from a Forcepoint: device fix, run through:
1. Reproduce the original trigger, does the issue reappear? 2. Check the device's status / health screen for any new alerts. 3. Confirm paired devices (app, hub, controller) reconnected. 4. Save / commit any configuration changes per the device's normal workflow. 5. Note the change in your maintenance log with date + firmware version.
Escalation guide
For a Forcepoint: device, the right escalation depends on impact:
- Cosmetic / minor: log a ticket via the Forcepoint: app or web portal. Response 1-3 business days.
- Mid-impact: phone support. Have your serial number ready.
- Critical (production down, safety issue): in-person dealer / TAC visit. Bring proof of purchase.
- Out of warranty: third-party repair shop with manufacturer-certified technicians.
More frequently asked questions
Is it safe to apply during business hours?
If the device is in production use, apply during a scheduled maintenance window. Most procedures need 2-15 minutes of downtime. Capture pre-change state so you can roll back if needed.
Can I roll this back if something breaks?
Yes for software-level changes (firmware rollback, config rollback). Hardware changes are usually one-way. Always back up settings before starting.
Will this void my warranty?
Applying official firmware updates and following the user manual will not affect warranty. Opening sealed components, jumping safety circuits, or using third-party parts can void warranty in most jurisdictions.
What if my model isn't exactly the same revision?
Cross-check the model code on the rating plate against the manufacturer support page. Major firmware generations sometimes shift the menu path; the option is usually under a similarly-named section.
Will the procedure work on the international variant?
Some features and firmware paths are region-locked. Check the model spec sheet to confirm your variant supports the menu option referenced. If you're outside the US/EU, look for the regional support portal.