INVALID_ID_TOKEN on Identity Platform, what causes it and how to fix

By Sai Kiran Pandrala · Last verified: 2026-05-31 · Source: Google Cloud Community, community Q&A, Google Cloud docs

INVALID_ID_TOKEN on Identity Platform, what causes it and how to fix on Google Identity Platform sits in the most-reported issues list across r/aws, Google Cloud Community, and StackOverflow. The recovery path is mostly known, the Google Cloud docs just bury it under three layers of conceptual material.

What invalid_id_token on identity platform, what causes it and how to fix actually involves on Google Identity Platform

The INVALID_ID_TOKEN error from AWS typically surfaces with the message "INVALID_ID_TOKEN". The error code itself is what you grep for in AWS re:Post or in AWS Support cases, not the human-readable line.

On Identity Platform, this most often comes from one of three causes: a missing or restrictive IAM permission, a service-level limit you have hit, or a transient AWS-side capacity issue. The fix path differs by which.

The rest of this page is the structured fix path. Start with diagnose, then remediation, then the automation options so you do not have to do this by hand the next time it surfaces. Verify and safety sections at the end are the discipline that keeps the fix from regressing in production.

Diagnose first, fix second

Check the Google Cloud Service Health at status.cloud.google.com and the per-product status board for ongoing service events in your region. About one in ten user-reported outages turn out to be region-scoped Google Cloud service degradation already being tracked. Cloud Service Health also exposes an API and Eventarc events, so you can wire a Lambda hook that pages on-call only when the failure correlates with an active Cloud Service Health event in the same region and service.

Diff against last known good. The last config change you made is the cause about three quarters of the time, even when the change should not have mattered. Use Asset Inventory snapshot history (or your Terraform / Deployment Manager or Terraform drift report) to see the actual delta between the resource state when it worked and when it broke. The change you remember is often not the only change that happened.

Reproduce the failure with the gcloud CLI in --debug mode. The full SigV4 request payload it emits, plus the exact endpoint URL it resolved to, is what Google Cloud Support uses to verify policy, region, or parameter issues without you having to share IAM credentials. Save the debug output to a file with gcloud ... --debug 2> debug.log and you can search it for the failed aws.request entry.

Solution-focused remediation path

When the failure happens in production but not in dev, do not just compare the IAM policy. Compare the Org Policy / RCP at the OU level, the permission boundary on the role, and the resource-based policy on the target. One of those is almost always different between accounts. Policy Intelligence recommendations bundles make this comparison routine.

Most Google Identity Platform failures fall into one of three buckets: IAM permission gap, networking path break (security group, NACL, or VPC endpoint policy), or service-limit / quota hit. Run that mental triage first - it covers around 80 percent of real-world cases. If the failure does not fit any of the three, it is likely a service-side regression worth opening a re:Post or support ticket for.

If networking is suspect, use Network Intelligence Connectivity Tests. It is the only tool that simulates the full ENI-to-ENI path including firewall rules, hierarchical firewall policies, routes, and VPC Service Controls perimeters in one call. Manual trace is slower and misses transitive issues. The analyzer charges $0.10 per analysis - cheaper than a 30-minute call with your network team.

Automate this fix so you do not do it twice

Automate the fix with Python and boto3

For anything you do more than twice, write a small Python script. The boto3 pattern below uses paginators (so it does not blow up on accounts with thousands of resources), explicit region binding, and a dry-run flag that defaults to True. Keep the script under 100 lines; if it grows beyond that, you are building a tool and should put it behind a Lambda with proper logging.

import boto3, sys
DRY_RUN = '--apply' not in sys.argv
client = boto3.client('google', region_name='us-east-1')
paginator = client.get_paginator('describe_...')
for page in paginator.paginate(): for item in page.get('Items', []): if item.get('Status') == 'FAILED': if DRY_RUN: print(f'[dry-run] would fix {item["Id"]}') else: client.modify_...(ResourceId=item['Id']) print(f'fixed {item["Id"]}')

Wire the fix into Eventarc for self-healing

If the failure mode is recurring, automate the remediation instead of the diagnosis. Eventarc Scheduler or rules that watch Cloud Logging events for the specific error code can invoke a Lambda that runs the same fix you would run by hand. The Lambda must be idempotent (re-running it on already-healthy resources must be a no-op) and must emit a Cloud Monitoring metric so you can track how often the auto-fix fires. A spike in auto-fix invocations is itself a signal worth alerting on.

# Eventarc rule pattern (JSON)
{ "source": ["aws.google"], "detail-type": ["Google Cloud API Call via Cloud Audit Logs"], "detail": { "errorCode": ["AccessDenied", "ThrottlingException"] }
}

Automate the fix with the gcloud CLI

The CLI one-liner pattern for Google Identity Platform operations is roughly: gcloud google describe RESOURCE --format=json --filter ... to read state, gcloud google update RESOURCE --quiet to apply the change, and gcloud google describe RESOURCE --format=json --filter ... again to verify. Wrap it in a shell script that sets a region variable at the top and exits on first error with set -euo pipefail so a partial run does not leave the account in a half-fixed state.

# Template - replace placeholders with your account specifics
export GOOGLE_CLOUD_REGION=us-central1
export GOOGLE_CLOUD_PROJECT=prod-project
gcloud google describe RESOURCE --format=json --filter 'Resources[?Status==`FAILED`].[Id,Reason]' --output table
gcloud google modify-... --resource-id RESOURCE_ID --no-dry-run
gcloud google describe RESOURCE_ID --query 'Status'

Common pitfalls and what to watch for

A subtle pitfall on Google Identity Platform is that the Cloud Console and the SDK can disagree about resource state during a configuration change. Console UI is cached for performance and may show the old config for up to 10 minutes after you change it via API or Deployment Manager or Terraform. Always confirm with describe-* CLI calls during a change window, not with screenshots from the Console.

The other pitfall: assuming that an automated remediation is correct because it succeeded. A Lambda that fires on a Cloud Monitoring alert policy and runs a remediation step should also publish a metric for every remediation; sudden surges in auto-fix invocations are themselves an outage signal. Otherwise you can hide a slow-burn regression behind a quiet remediation loop for weeks.

Verify the fix worked

• Reproduce the original symptom path. If it still surfaces in any account or region or IAM role or service account, you have not fixed it.
• Watch for 24 to 48 hours. Cloud Monitoring metrics and Cloud Asset Inventory can mask issues with cached health for 6 to 12 hours, especially Cloud CDN and Cloud DNS.
• Run a smoke test under realistic load. Happy-path tests miss race conditions and IAM session-cache issues.
• Capture the new state in a runbook so the next person on call does not have to rediscover this. Push it to Confluence or your team wiki, not into Slack.
• If the fix involved a permission change, run IAM Access Analyzer one more time to confirm you did not open a separate hole while closing this one.

Safety, rollback, blast radius

• Test in a non-production account if your environment has Resource Manager and Organization Policy or Cloud Resource Manager (organizations, folders, projects). The cost of one sandbox account is cheaper than one rollback meeting.
• Export the existing config before changing it. Most Google Identity Platform resources support describe + export to JSON via CLI - capture that to source control before you start.
• Know your rollback path. Some Google Identity Platform operations are one-way (region migration, account-level feature opt-in, Cloud KMS key deletion past pending window). Confirm reversibility on the Google Cloud doc before you commit.
• Be aware of cross-service impact. IAM role or service account changes ripple to every service trusting that role. Cloud KMS key changes break every workload depending on that key. VPC endpoint changes affect every VPC consumer of that endpoint.
• Maintenance window discipline: if the change touches DNS, certificate rotation, or anything that emits TLS handshakes, line up a window with stakeholder notification, not a heroic mid-day swap.

FAQ

Related fixes

Related guides worth a look while you sort this one out:

• EMAIL_EXISTS on Identity Platform. what causes it and how to fix
• TENANT_NOT_FOUND on Identity Platform, what causes it and how to fix
• TOO_MANY_ATTEMPTS_TRY_LATER on Identity Platform. what causes it and how to fix
• USER_DISABLED on Identity Platform, what causes it and how to fix
• Invalid on Access Context Manager: what causes it and how to fix
• CONFIG_INVALID_APP_YAML on App Engine: what causes it and how to fix