NOT_FOUND on Vertex AI Agent Builder. what causes it and how to fix

By Sai Kiran Pandrala · Last verified: 2026-05-31 · Source: Google Cloud Community, community Q&A, Google Cloud docs

Engineers running Vertex AI Agent Builder hit NOT_FOUND on Vertex AI Agent Builder, what causes it and how to fix often enough that there is a stable fix pattern. This page captures it in the order Google Cloud support would run it during a real incident.

What not_found on vertex ai agent builder, what causes it and how to fix actually involves on Vertex AI Agent Builder

The NOT_FOUND error from AWS typically surfaces with the message "Engine does not exist". The error code itself is what you grep for in AWS re:Post or in AWS Support cases, not the human-readable line.

On Vertex AI Agent Builder, this most often comes from one of three causes: a missing or restrictive IAM permission, a service-level limit you have hit, or a transient AWS-side capacity issue. The fix path differs by which.

The rest of this page is the structured fix path. Start with diagnose, then remediation, then the automation options so you do not have to do this by hand the next time it surfaces. Verify and safety sections at the end are the discipline that keeps the fix from regressing in production.

Diagnose first, fix second

Diff against last known good. The last config change you made is the cause about three quarters of the time, even when the change should not have mattered. Use Asset Inventory snapshot history (or your Terraform / Deployment Manager or Terraform drift report) to see the actual delta between the resource state when it worked and when it broke. The change you remember is often not the only change that happened.

Check the Google Cloud Service Health at status.cloud.google.com and the per-product status board for ongoing service events in your region. About one in ten user-reported outages turn out to be region-scoped Google Cloud service degradation already being tracked. Cloud Service Health also exposes an API and Eventarc events, so you can wire a Lambda hook that pages on-call only when the failure correlates with an active Cloud Service Health event in the same region and service.

Reproduce the failure with the gcloud CLI in --debug mode. The full SigV4 request payload it emits, plus the exact endpoint URL it resolved to, is what Google Cloud Support uses to verify policy, region, or parameter issues without you having to share IAM credentials. Save the debug output to a file with gcloud ... --debug 2> debug.log and you can search it for the failed aws.request entry.

Solution-focused remediation path

For IAM and STS issues, the timing matters. STS sessions can take up to 60 seconds to propagate after creation. The first call right after assume-role can fail with a permission error even when the policy is correct. Add a small retry with backoff before treating the first failure as definitive.

If the issue points at IAM, do not start by adding * to a policy. Use IAM Policy Troubleshooter and IAM Recommender against the failed action to see the minimum scope. Adding * is the fastest way to fail your next Google Cloud Architecture Framework security review, and it usually does not even fix the issue because the explicit deny is often coming from a higher level (Org Policy, RCP, or permission boundary), not a missing allow.

When the failure happens in production but not in dev, do not just compare the IAM policy. Compare the Org Policy / RCP at the OU level, the permission boundary on the role, and the resource-based policy on the target. One of those is almost always different between accounts. Policy Intelligence recommendations bundles make this comparison routine.

Automate this fix so you do not do it twice

Automate the fix with the gcloud CLI

The CLI one-liner pattern for Vertex AI Agent Builder operations is roughly: gcloud vertex describe RESOURCE --format=json --filter ... to read state, gcloud vertex update RESOURCE --quiet to apply the change, and gcloud vertex describe RESOURCE --format=json --filter ... again to verify. Wrap it in a shell script that sets a region variable at the top and exits on first error with set -euo pipefail so a partial run does not leave the account in a half-fixed state.

# Template - replace placeholders with your account specifics
export GOOGLE_CLOUD_REGION=us-central1
export GOOGLE_CLOUD_PROJECT=prod-project
gcloud vertex describe RESOURCE --format=json --filter 'Resources[?Status==`FAILED`].[Id,Reason]' --output table
gcloud vertex modify-... --resource-id RESOURCE_ID --no-dry-run
gcloud vertex describe RESOURCE_ID --query 'Status'

Add a Workflows or Cloud Tasks Automation runbook

For multi-step fixes that include a manual approval, use Workflows runbook. Document the fix as a runbook with workflows.executions.approve steps where a human signs off and workflows.steps.callApi steps where the runbook calls the Google Cloud API. Approvers are notified by SNS; the runbook execution shows up in Cloud Audit Logs with the approver's identity attached. This makes audit trails easy and stops production fixes from being one-person operations.

Wire the fix into Eventarc for self-healing

If the failure mode is recurring, automate the remediation instead of the diagnosis. Eventarc Scheduler or rules that watch Cloud Logging events for the specific error code can invoke a Lambda that runs the same fix you would run by hand. The Lambda must be idempotent (re-running it on already-healthy resources must be a no-op) and must emit a Cloud Monitoring metric so you can track how often the auto-fix fires. A spike in auto-fix invocations is itself a signal worth alerting on.

# Eventarc rule pattern (JSON)
{ "source": ["aws.vertex"], "detail-type": ["Google Cloud API Call via Cloud Audit Logs"], "detail": { "errorCode": ["AccessDenied", "ThrottlingException"] }
}

Common pitfalls and what to watch for

A subtle pitfall on Vertex AI Agent Builder is that the Cloud Console and the SDK can disagree about resource state during a configuration change. Console UI is cached for performance and may show the old config for up to 10 minutes after you change it via API or Deployment Manager or Terraform. Always confirm with describe-* CLI calls during a change window, not with screenshots from the Console.

The other pitfall: assuming that an automated remediation is correct because it succeeded. A Lambda that fires on a Cloud Monitoring alert policy and runs a remediation step should also publish a metric for every remediation; sudden surges in auto-fix invocations are themselves an outage signal. Otherwise you can hide a slow-burn regression behind a quiet remediation loop for weeks.

Verify the fix worked

• Reproduce the original symptom path. If it still surfaces in any account or region or IAM role or service account, you have not fixed it.
• Watch for 24 to 48 hours. Cloud Monitoring metrics and Cloud Asset Inventory can mask issues with cached health for 6 to 12 hours, especially Cloud CDN and Cloud DNS.
• Run a smoke test under realistic load. Happy-path tests miss race conditions and IAM session-cache issues.
• Capture the new state in a runbook so the next person on call does not have to rediscover this. Push it to Confluence or your team wiki, not into Slack.
• If the fix involved a permission change, run IAM Access Analyzer one more time to confirm you did not open a separate hole while closing this one.

Safety, rollback, blast radius

• Test in a non-production account if your environment has Resource Manager and Organization Policy or Cloud Resource Manager (organizations, folders, projects). The cost of one sandbox account is cheaper than one rollback meeting.
• Export the existing config before changing it. Most Vertex AI Agent Builder resources support describe + export to JSON via CLI - capture that to source control before you start.
• Know your rollback path. Some Vertex AI Agent Builder operations are one-way (region migration, account-level feature opt-in, Cloud KMS key deletion past pending window). Confirm reversibility on the Google Cloud doc before you commit.
• Be aware of cross-service impact. IAM role or service account changes ripple to every service trusting that role. Cloud KMS key changes break every workload depending on that key. VPC endpoint changes affect every VPC consumer of that endpoint.
• Maintenance window discipline: if the change touches DNS, certificate rotation, or anything that emits TLS handshakes, line up a window with stakeholder notification, not a heroic mid-day swap.

FAQ

Related fixes

Related guides worth a look while you sort this one out:

• FAILED_PRECONDITION on Vertex AI Agent Builder. what causes it and how to fix
• INVALID_ARGUMENT on Vertex AI Agent Builder: what causes it and how to fix
• PERMISSION_DENIED on Vertex AI Agent Builder, what causes it and how to fix
• RESOURCE_EXHAUSTED on Vertex AI Agent Builder, what causes it and how to fix
• NOT_FOUND on Vertex AI Feature Store, what causes it and how to fix
• NOT_FOUND on Vertex AI Model Garden, what causes it and how to fix