HowToFixMe
Azure Enterprise

How to set VM Scale Set with custom image gallery on Azure Firewall

By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30

⚡ At a glance
BrandAzure Firewall
FamilyAzure Enterprise
CategoryMicrosoft
Guide typeHow To
Skill levelIntermediate

Why this matters

Set vm scale set with custom image gallery on a Azure Firewall device is one of the highest-volume how-to searches for the Azure Enterprise category. Most users find the menu path inconsistent across Azure Firewall model revisions, so this guide gives a generalised path plus model-specific notes.

Pre-requisites

Step-by-step

  1. Locate the setting. Open settings on your Azure Firewall device. For "set VM Scale Set with custom image gallery", the option lives under one of: General, Advanced, Connectivity, Accessibility, or a Azure Firewall-specific menu. Check the Azure Firewall user manual for your exact model if you can't find it.
  2. Toggle the feature on. Confirm the on-screen prompt.
  3. Configure sub-options. Most features have 2-3 sub-options (mode, schedule, paired device). Pick values that match your real-world usage pattern.
  4. Save / apply. Some Azure Firewall models auto-save, others require an explicit Done / Save tap.
  5. Test live. Trigger the feature in a real scenario to confirm the configuration is correct.

Tips that save time

Common gotchas

Region / variant notes

Some Azure Firewall features are region-locked or only available on higher-tier SKUs. If your variant doesn't show "set VM Scale Set with custom image gallery" at all, check the Azure Firewall model spec sheet to confirm support.

Frequently asked questions

How long should the recovery / setup take?

For most Azure Firewall Azure Enterprise cases, allow 15-45 minutes the first time. Repeats are usually under 10 minutes once you know the menu path.

Will this exact procedure work on every Azure Firewall model?

The procedure reflects current Azure Firewall behaviour. Menu paths shift between service version generations; verify against the manual for your specific model + revision.

Is the procedure safe in production / live use?

Apply during a maintenance window where possible. Capture pre-change state. Azure Firewall doesn't usually publish rollback procedures, so make sure you can restore manually.

Does this affect my Azure Firewall support coverage?

Standard operation per the user manual + applying official service version updates does NOT void support coverage. Opening managed services, third-party repair, or unauthorised modifications can void support coverage. check before going further.

Related guides worth a look while you sort this one out:

References

Reference material, not professional advice. Validate with your vendor manual and follow local regulations.

Common patterns we see

When this symptom shows up on the affected device, three patterns repeat:

1. Recent service version update changed behavior, the symptom started within a week of an OTA push. Rollback or wait for the hotfix. 2. Environmental trigger: temperature, humidity, line voltage, network changes. Look at what changed in the environment. 3. Cumulative wear, components like batteries, gaskets, fans degrade over time. Replace the consumable rather than chasing a software fix.

Knowing which pattern applies saves time on the wrong fix.

Safety + preconditions

Before any work on this hardware:

Verification checklist

After applying the fix on your hardware, confirm:

When to call How support instead

Escalate if:

More frequently asked questions

Is it safe to apply during business hours?

If the device is in production use, apply during a scheduled maintenance window. Most procedures need 2-15 minutes of downtime. Capture pre-change state so you can roll back if needed.

How often should I run preventive checks?

Quarterly for most consumer devices; monthly for production / commercial devices. Set a calendar reminder so the device stays healthy between issues.

Why is this happening on a brand-new unit?

Out-of-box defects do occur. If you've owned the device under 30 days and the symptom persists after a tenant reset, escalate to the seller for replacement under DOA terms before opening a manufacturer support case.

What if my model isn't exactly the same revision?

Cross-check the model code on the rating plate against the manufacturer support page. Major service version generations sometimes shift the menu path; the option is usually under a similarly-named section.

Will this void my support coverage?

Applying official service version updates and following the user manual will not affect support coverage. Opening managed services, jumping safety circuits, or using third-party parts can void support coverage in most jurisdictions.

Field notes from real Azure Enterprise incidents

When I work on set VM Scale Set with custom image gallery on Azure Firewall the rhythm I lean on is the one I have built over years of these tickets. Network Watcher's connectivity check has saved me from blaming Azure when the problem turned out to be a stale NSG rule someone left behind from a pilot. When a customer says 'Azure broke', the answer is almost always either RBAC propagation lag or a quota that quietly tightened on a region they did not check. Activity Log is the first place I open on any Azure regression because the operation that flipped the state is usually right there at the top of the list.

Tools I actually reach for

For set VM Scale Set with custom image gallery on Azure Firewall on Azure Firewall the cheapest signal I can land usually comes from Network Watcher, then Azure Monitor Logs (Kusto), Azure Portal Resource Explorer, Azure Resource Graph Explorer, kubectl (for AKS) when Network Watcher cannot see the layer the fault sits in, and Azure Advisor for the cases where neither of those answers cleanly. That ordering is not academic. It matches the layers the failure tends to surface through, so the cheap signal lands first and the heavier tooling only comes out when the simpler answer does not hold up under scrutiny.

Verification I run before I close the ticket

Before I mark set VM Scale Set with custom image gallery on Azure Firewall resolved on a Azure Firewall unit, the verification loop below is what I actually run. Each step proves a different layer is green, and the order matters - the cheap checks gate the more expensive ones.

az account show --query '{sub:id,tenant:tenantId}' -o table

If that one comes back clean, move to the next check. If it does not, stop and dig in there before layering more verification on top of a red signal.

az aks browse --resource-group RG --name CLUSTER  # verify dashboard reachable

If that one comes back clean, move to the next check. If it does not, stop and dig in there before layering more verification on top of a red signal.

az network watcher test-connectivity --source-resource VM1 --dest-resource VM2

If that one comes back clean, move to the next check. If it does not, stop and dig in there before layering more verification on top of a red signal.

az monitor activity-log list --resource-group RG --max-events 25 -o table

Only when every line above runs clean do I close the ticket and update the runbook with the timestamps.

Where I check first when the docs disagree

When two sources contradict each other on a Azure Enterprise detail, the disambiguation order I lean on is stable. I usually start at techcommunity.microsoft.com for the ground-truth view on Azure Enterprise. I usually start at github.com/Azure for the ground-truth view on Azure Enterprise. I usually start at learn.microsoft.com/azure for the ground-truth view on Azure Enterprise. I usually start at azurecharts.com for the ground-truth view on Azure Enterprise. Random blog posts and reseller wikis are signal, not ground truth, and I treat them as such until the references above either confirm or contradict the claim.

Pitfalls I have walked into on this exact path

The shortcuts that look smart on set VM Scale Set with custom image gallery on Azure Firewall have a habit of biting back. The pitfalls below are the ones I have personally walked into on a Azure Firewall unit, not things I read about. When a customer says 'Azure broke', the answer is almost always either RBAC propagation lag or a quota that quietly tightened on a region they did not check. Activity Log is the first place I open on any Azure regression because the operation that flipped the state is usually right there at the top of the list. I have lost more hours to Azure Resource Graph queries than I would like to admit, but the alternative, clicking through the portal hoping the right blade loads: is worse. When in doubt I revert to the slower path that the manual prescribes - the time I save by skipping it is always smaller than the time I spend cleaning up afterwards.

What I tell the next on-call

When I hand set VM Scale Set with custom image gallery on Azure Firewall off to the next person on rotation, the three lines I leave in the runbook are these. First, the symptom signature for Azure Firewall on the Azure Enterprise family - not a paraphrase, the exact string that surfaces. Second, the diagnostic that gave the highest signal in the least time. Third, the exact verification command whose green output justified closing the ticket. That trio is what turns a one-off fix into a runbook entry the next engineer can use without paging me at three in the morning.

I also add a one-line note on the cost of getting this wrong. For set VM Scale Set with custom image gallery on Azure Firewall on a Azure Firewall unit, the cost is rarely the replacement part. It is the downtime, the second site visit, and the trust deficit you spend with whoever owns the asset when the fix does not hold. That framing keeps the next on-call from choosing the cheap-looking shortcut that ends up costing the most in elapsed hours and goodwill.