Does this affect my Entra Identity Protection warranty?

Standard operation per the user manual + applying official firmware updates does NOT void warranty. Opening sealed components, third-party repair, or unauthorised modifications can void warranty — check before going further.

Entra Identity

Entra Identity Protection sign in error AADSTS50105 not assigned to role: Fix

By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30

⚡ At a glance

Brand	Entra Identity Protection
Family	Entra Identity
Category	Microsoft
Guide type	Problem Fix
Skill level	Intermediate

What's happening on your Entra Identity Protection

You hit sign in error AADSTS50105 not assigned to role on a Entra Identity Protection device in the Entra Identity family. This sits in the most-reported issue list for Entra Identity Protection in 2026 across community forums and vendor support: meaning the recovery path is mostly known.

Fast triage (5 minutes)

service restart: stop the resource cleanly for 60 seconds, then power on. About 30% of Entra Identity Protection "sign in error AADSTS50105 not assigned to role" reports clear here.
Check status: any indicator service health indicators, dashboard alerts, or display codes on the Entra Identity Protection unit right now? Note them, they decide which branch to take below.
Check release notes: is this device on the latest service version / OS update from Entra Identity Protection? An advisory for "sign in error AADSTS50105 not assigned to role" may already be published.
Try a clean test: a known-good cable / network / account isolates the device from external causes.
Capture the exact symptom string. vendor TAC will ask for it verbatim.

Confirm scope. Is this only on the one device, or fleet-wide? If fleet-wide, treat as a release / config / network issue, not a hardware fault.
Apply the safe fix first.

- On Entra Identity Protection for "sign in error AADSTS50105 not assigned to role", that usually means: soft reset → service version update from the Entra Identity Protection official portal → re-pair the device with its management tool / app.

Targeted diagnostics. Use the Entra Identity Protection-specific diagnostic mode (most Entra Identity Protection Entra Identity devices have one). It surfaces the exact subsystem reporting the fault, which speeds up parts ordering or escalation.
Controlled hard reset (only if soft fix fails). Back up settings + data first. Then tenant reset following the Entra Identity Protection user manual for your model. Re-enrol from scratch.
Validate. Reproduce the original trigger to confirm the fix held.
Document. Log what worked. If it returns, you've got a faster path next time.

Escalation path for Entra Identity Protection

Entra Identity Protection support / TAC with the symptom string + your serial number.
Community forums for Entra Identity Protection Entra Identity, most "sign in error AADSTS50105 not assigned to role" issues have an active thread.
If under support coverage, raise a service request before opening the device.

Avoid recurrence

Keep service version on the latest stable channel published by Entra Identity Protection.
Use spike-protected power (especially for India + locations with line-voltage swings).
Avoid uncertified third-party accessories on Entra Identity Protection Entra Identity devices.
Schedule the periodic maintenance interval that Entra Identity Protection recommends for your specific model.

Frequently asked questions

How long should the recovery / setup take?

For most Entra Identity Protection Entra Identity cases, allow 15-45 minutes the first time. Repeats are usually under 10 minutes once you know the menu path.

Will this exact procedure work on every Entra Identity Protection model?

The procedure reflects current Entra Identity Protection behaviour. Menu paths shift between service version generations; verify against the manual for your specific model + revision.

Is the procedure safe in production / live use?

Apply during a maintenance window where possible. Capture pre-change state. Entra Identity Protection doesn't usually publish rollback procedures, so make sure you can restore manually.

Does this affect my Entra Identity Protection support coverage?

Standard operation per the user manual + applying official service version updates does NOT void support coverage. Opening managed services, third-party repair, or unauthorised modifications can void support coverage: check before going further.

All Entra Identity guides → /microsoft/section/entra_identity.html
All Microsoft guides → /microsoft/

Related guides worth a look while you sort this one out:

References

Entra Identity Protection official support portal for your model.
Entra Identity Protection community forum + Reddit threads.
Vendor PSIRT / advisory page (where applicable).

Reference material, not professional advice. Validate with your vendor manual and follow local regulations.

What changed recently?

Fault diagnosis on a Entra device goes faster when you map the symptom to a recent change:

Did service version update in the last 7 days?
Did the network (router, ISP, VPN) change?
Was the device moved physically?
Did paired devices (phone, hub, app) update?
Were any accessories swapped in or out?

The answer narrows the root cause to a manageable subset.

Safety + preconditions

Before any work on a Entra device:

Unplug from mains for any internal-access procedure.
flush cached state (circuit breakers in PSUs, residual battery charge) per manufacturer guidance.
Use ESD-safe handling for boards and modules, no carpet, no wool sleeves.
Avoid moisture; never apply liquids near vents or connectors.
If you smell smoke, see scorch marks, or feel uneven heat, stop and escalate.

Quick verification

Before you walk away from a Entra device fix, run through:

1. Reproduce the original trigger. does the issue reappear? 2. Check the device's status / health screen for any new alerts. 3. Confirm paired devices (app, hub, controller) reconnected. 4. Save / commit any configuration changes per the device's normal workflow. 5. Note the change in your maintenance log with date + service version version.

When to call Entra support instead

Escalate if:

The same symptom returns within 24 hours of a clean fix.
You see physical damage (burn marks, swollen battery, cracked PCB).
The device is in support coverage and a hardware replacement is the cheaper outcome.
Repair requires specialised tools you don't own (alignment jigs, calibration software).
Following the official path keeps the support coverage intact, which matters more than the time spent.

Field notes from real Entra Identity incidents

When I work on Entra Identity Protection sign in error AADSTS50105 not assigned to role: Fix the rhythm I lean on is the one I have built over years of these tickets. The Microsoft Graph PowerShell SDK is the path forward for Entra automation; the legacy AzureAD module is on a timer. Conditional Access What-If is the only safe way to test a policy change; deploying first and watching the support queue light up is the dangerous way. Sign-in logs are the single highest-signal Entra surface: every failure has a specific status code and the doc page for that code is one search away.

Tools I actually reach for

For Entra Identity Protection sign in error AADSTS50105 not assigned to role: Fix on Entra Identity Protection the cheapest signal I can land usually comes from Entra ID Diagnostics & Logs, then Sign-in logs, Audit logs when Entra ID Diagnostics & Logs cannot see the layer the fault sits in, and AzureAD module (legacy, deprecation pending) for the cases where neither of those answers cleanly. That ordering is not academic. It matches the layers the failure tends to surface through, so the cheap signal lands first and the heavier tooling only comes out when the simpler answer does not hold up under scrutiny.

Verification I run before I close the ticket

Before I mark Entra Identity Protection sign in error AADSTS50105 not assigned to role: Fix resolved on a Entra Identity Protection unit, the verification loop below is what I actually run. Each step proves a different layer is green, and the order matters - the cheap checks gate the more expensive ones.

Entra > Diagnose and solve problems > run the relevant playbook

If that one comes back clean, move to the next check. If it does not, stop and dig in there before layering more verification on top of a red signal.

Get-MgConditionalAccessPolicy | Select-Object DisplayName,State

If that one comes back clean, move to the next check. If it does not, stop and dig in there before layering more verification on top of a red signal.

Connect-MgGraph -Scopes 'AuditLog.Read.All','Directory.Read.All'

Only when every line above runs clean do I close the ticket and update the runbook with the timestamps.

Where I check first when the docs disagree

When two sources contradict each other on a Entra Identity detail, the disambiguation order I lean on is stable. I usually start at techcommunity.microsoft.com/category/azure-active-directory for the ground-truth view on Entra Identity. I usually start at azure.microsoft.com/updates for the ground-truth view on Entra Identity. I usually start at learn.microsoft.com/entra for the ground-truth view on Entra Identity. Random blog posts and reseller wikis are signal, not ground truth, and I treat them as such until the references above either confirm or contradict the claim.

Pitfalls I have walked into on this exact path

The shortcuts that look smart on Entra Identity Protection sign in error AADSTS50105 not assigned to role: Fix have a habit of biting back. The pitfalls below are the ones I have personally walked into on a Entra Identity Protection unit, not things I read about. Sign-in logs are the single highest-signal Entra surface, every failure has a specific status code and the doc page for that code is one search away. Conditional Access What-If is the only safe way to test a policy change; deploying first and watching the support queue light up is the dangerous way. The Microsoft Graph PowerShell SDK is the path forward for Entra automation; the legacy AzureAD module is on a timer. When in doubt I revert to the slower path that the manual prescribes - the time I save by skipping it is always smaller than the time I spend cleaning up afterwards.

What I tell the next on-call

When I hand Entra Identity Protection sign in error AADSTS50105 not assigned to role: Fix off to the next person on rotation, the three lines I leave in the runbook are these. First, the symptom signature for Entra Identity Protection on the Entra Identity family - not a paraphrase, the exact string that surfaces. Second, the diagnostic that gave the highest signal in the least time. Third, the exact verification command whose green output justified closing the ticket. That trio is what turns a one-off fix into a runbook entry the next engineer can use without paging me at three in the morning.

I also add a one-line note on the cost of getting this wrong. For Entra Identity Protection sign in error AADSTS50105 not assigned to role: Fix on a Entra Identity Protection unit, the cost is rarely the replacement part. It is the downtime, the second site visit, and the trust deficit you spend with whoever owns the asset when the fix does not hold. That framing keeps the next on-call from choosing the cheap-looking shortcut that ends up costing the most in elapsed hours and goodwill.