HowToFixMe
Entra Identity

Global Secure Access Workload Identities license required: Fix

By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30

⚡ At a glance
BrandGlobal Secure Access
FamilyEntra Identity
CategoryMicrosoft
Guide typeProblem Fix
Skill levelIntermediate

What's happening on your Global Secure Access

You hit Workload Identities license required on a Global Secure Access device in the Entra Identity family. This sits in the most-reported issue list for Global Secure Access in 2026 across community forums and vendor support, meaning the recovery path is mostly known.

Fast triage (5 minutes)

  1. service restart: stop the resource cleanly for 60 seconds, then power on. About 30% of Global Secure Access "Workload Identities license required" reports clear here.
  2. Check status: any indicator service health indicators, dashboard alerts, or display codes on the Global Secure Access unit right now? Note them: they decide which branch to take below.
  3. Check release notes: is this device on the latest service version / OS update from Global Secure Access? An advisory for "Workload Identities license required" may already be published.
  4. Try a clean test: a known-good cable / network / account isolates the device from external causes.
  5. Capture the exact symptom string, vendor TAC will ask for it verbatim.

Step-by-step fix for Global Secure Access Workload Identities license required

  1. Confirm scope. Is this only on the one device, or fleet-wide? If fleet-wide, treat as a release / config / network issue, not a hardware fault.
  2. Apply the safe fix first.

- On Global Secure Access for "Workload Identities license required", that usually means: soft reset → service version update from the Global Secure Access official portal → re-pair the device with its management tool / app.

  1. Targeted diagnostics. Use the Global Secure Access-specific diagnostic mode (most Global Secure Access Entra Identity devices have one). It surfaces the exact subsystem reporting the fault, which speeds up parts ordering or escalation.
  2. Controlled hard reset (only if soft fix fails). Back up settings + data first. Then tenant reset following the Global Secure Access user manual for your model. Re-enrol from scratch.
  3. Validate. Reproduce the original trigger to confirm the fix held.
  4. Document. Log what worked. If it returns, you've got a faster path next time.

Escalation path for Global Secure Access

Avoid recurrence

Frequently asked questions

How long should the recovery / setup take?

For most Global Secure Access Entra Identity cases, allow 15-45 minutes the first time. Repeats are usually under 10 minutes once you know the menu path.

Will this exact procedure work on every Global Secure Access model?

The procedure reflects current Global Secure Access behaviour. Menu paths shift between service version generations; verify against the manual for your specific model + revision.

Is the procedure safe in production / live use?

Apply during a maintenance window where possible. Capture pre-change state. Global Secure Access doesn't usually publish rollback procedures, so make sure you can restore manually.

Does this affect my Global Secure Access support coverage?

Standard operation per the user manual + applying official service version updates does NOT void support coverage. Opening managed services, third-party repair, or unauthorised modifications can void support coverage, check before going further.

Related guides worth a look while you sort this one out:

References

Reference material, not professional advice. Validate with your vendor manual and follow local regulations.

What changed recently?

Fault diagnosis on a Global device goes faster when you map the symptom to a recent change:

The answer narrows the root cause to a manageable subset.

Before you start

A few things to confirm so the Global device fix goes cleanly:

Verification checklist

After applying the fix on your Global device, confirm:

Escalation guide

For a Global device, the right escalation depends on impact:

More frequently asked questions

How often should I run preventive checks?

Quarterly for most consumer devices; monthly for production / commercial devices. Set a calendar reminder so the device stays healthy between issues.

Will this void my support coverage?

Applying official service version updates and following the user manual will not affect support coverage. Opening managed services, jumping safety circuits, or using third-party parts can void support coverage in most jurisdictions.

Should I update service version first or last?

Update service version first if a release note specifically mentions your symptom. Otherwise, finish the troubleshooting flow first, then update; that way you can isolate whether the update or the underlying fix solved it.

What if the fix returns after a reboot?

Persistent fault returns mean either: a hardware fault (escalate), a configuration that's being overwritten by a sync source (check cloud profiles), or a regression in a recent service version update (rollback).

How long does this fix usually take?

Most users complete the steps in 20-45 minutes the first time, and 5-10 minutes on subsequent runs once the menu paths are familiar.

Field notes from real Entra Identity incidents

When I work on Global Secure Access Workload Identities license required: Fix the rhythm I lean on is the one I have built over years of these tickets. The Microsoft Graph PowerShell SDK is the path forward for Entra automation; the legacy AzureAD module is on a timer. Conditional Access What-If is the only safe way to test a policy change; deploying first and watching the support queue light up is the dangerous way. Sign-in logs are the single highest-signal Entra surface. every failure has a specific status code and the doc page for that code is one search away.

Tools I actually reach for

For Global Secure Access Workload Identities license required: Fix on Global Secure Access the cheapest signal I can land usually comes from Entra ID Diagnostics & Logs, then Entra admin center, Microsoft Graph PowerShell SDK when Entra ID Diagnostics & Logs cannot see the layer the fault sits in, and Conditional Access What-If tool for the cases where neither of those answers cleanly. That ordering is not academic. It matches the layers the failure tends to surface through, so the cheap signal lands first and the heavier tooling only comes out when the simpler answer does not hold up under scrutiny.

Verification I run before I close the ticket

Before I mark Global Secure Access Workload Identities license required: Fix resolved on a Global Secure Access unit, the verification loop below is what I actually run. Each step proves a different layer is green, and the order matters - the cheap checks gate the more expensive ones.

Get-MgConditionalAccessPolicy | Select-Object DisplayName,State

If that one comes back clean, move to the next check. If it does not, stop and dig in there before layering more verification on top of a red signal.

Entra > Diagnose and solve problems > run the relevant playbook

If that one comes back clean, move to the next check. If it does not, stop and dig in there before layering more verification on top of a red signal.

Get-MgAuditLogSignIn -Top 25 -Filter "createdDateTime gt 2026-05-01T00:00:00Z"

If that one comes back clean, move to the next check. If it does not, stop and dig in there before layering more verification on top of a red signal.

Connect-MgGraph -Scopes 'AuditLog.Read.All','Directory.Read.All'

Only when every line above runs clean do I close the ticket and update the runbook with the timestamps.

Where I check first when the docs disagree

When two sources contradict each other on a Entra Identity detail, the disambiguation order I lean on is stable. I usually start at azure.microsoft.com/updates for the ground-truth view on Entra Identity. I usually start at learn.microsoft.com/entra for the ground-truth view on Entra Identity. I usually start at techcommunity.microsoft.com/category/azure-active-directory for the ground-truth view on Entra Identity. Random blog posts and reseller wikis are signal, not ground truth, and I treat them as such until the references above either confirm or contradict the claim.

Pitfalls I have walked into on this exact path

The shortcuts that look smart on Global Secure Access Workload Identities license required: Fix have a habit of biting back. The pitfalls below are the ones I have personally walked into on a Global Secure Access unit, not things I read about. Conditional Access What-If is the only safe way to test a policy change; deploying first and watching the support queue light up is the dangerous way. The Microsoft Graph PowerShell SDK is the path forward for Entra automation; the legacy AzureAD module is on a timer. When in doubt I revert to the slower path that the manual prescribes - the time I save by skipping it is always smaller than the time I spend cleaning up afterwards.

What I tell the next on-call

When I hand Global Secure Access Workload Identities license required: Fix off to the next person on rotation, the three lines I leave in the runbook are these. First, the symptom signature for Global Secure Access on the Entra Identity family - not a paraphrase, the exact string that surfaces. Second, the diagnostic that gave the highest signal in the least time. Third, the exact verification command whose green output justified closing the ticket. That trio is what turns a one-off fix into a runbook entry the next engineer can use without paging me at three in the morning.

I also add a one-line note on the cost of getting this wrong. For Global Secure Access Workload Identities license required: Fix on a Global Secure Access unit, the cost is rarely the replacement part. It is the downtime, the second site visit, and the trust deficit you spend with whoever owns the asset when the fix does not hold. That framing keeps the next on-call from choosing the cheap-looking shortcut that ends up costing the most in elapsed hours and goodwill.