How to set up Azure DNS Private Resolver on Site Recovery

By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30

Why this matters

Set up azure dns private resolver on a Site Recovery device is one of the highest-volume how-to searches for the Azure Enterprise category. Most users find the menu path inconsistent across Site Recovery model revisions, so this guide gives a generalised path plus model-specific notes.

Pre-requisites

• A Site Recovery device that's powered on and on the latest stable service version / OS.
• The Site Recovery companion app or management tool installed and signed in.
• 5-15 minutes uninterrupted.

Step-by-step

1. Locate the setting. Open settings on your Site Recovery device. For "set up Azure DNS Private Resolver", the option lives under one of: General, Advanced, Connectivity, Accessibility, or a Site Recovery-specific menu. Check the Site Recovery user manual for your exact model if you can't find it.
2. Toggle the feature on. Confirm the on-screen prompt.
3. Configure sub-options. Most features have 2-3 sub-options (mode, schedule, paired device). Pick values that match your real-world usage pattern.
4. Save / apply. Some Site Recovery models auto-save, others require an explicit Done / Save tap.
5. Test live. Trigger the feature in a real scenario to confirm the configuration is correct.

Tips that save time

• Pair this feature with a Site Recovery automation / routine if the device supports it.
• If the feature relies on cloud sync, give it 1-2 minutes after enabling to propagate.
• For multi-user households / multi-admin teams, set per-user profiles so each user sees their preferred state.

Common gotchas

• Feature greyed out: usually service version too old. Update + retry.
• Feature works once then stops, battery saver / power saver mode is killing the Site Recovery app process. Whitelist it.
• Feature works but with delay. usually cloud-sync latency; check internet speed and Site Recovery service status.

Region / variant notes

Some Site Recovery features are region-locked or only available on higher-tier SKUs. If your variant doesn't show "set up Azure DNS Private Resolver" at all, check the Site Recovery model spec sheet to confirm support.

Frequently asked questions

How long should the recovery / setup take?

For most Site Recovery Azure Enterprise cases, allow 15-45 minutes the first time. Repeats are usually under 10 minutes once you know the menu path.

Will this exact procedure work on every Site Recovery model?

The procedure reflects current Site Recovery behaviour. Menu paths shift between service version generations; verify against the manual for your specific model + revision.

Is the procedure safe in production / live use?

Apply during a maintenance window where possible. Capture pre-change state. Site Recovery doesn't usually publish rollback procedures, so make sure you can restore manually.

Does this affect my Site Recovery support coverage?

Standard operation per the user manual + applying official service version updates does NOT void support coverage. Opening managed services, third-party repair, or unauthorised modifications can void support coverage, check before going further.

Related guides

• All Azure Enterprise guides → /microsoft/section/azure_enterprise.html
• All Microsoft guides → /microsoft/

Related fixes

Related guides worth a look while you sort this one out:

• How to set up Azure DNS Private Resolver on AKS
• How to set up Azure DNS Private Resolver on Application Gateway
• How to set up Azure DNS Private Resolver on Azure AI Search
• How to set up Azure DNS Private Resolver on Azure Arc
• How to set up Azure DNS Private Resolver on Azure Backup
• How to set up Azure DNS Private Resolver on Azure Firewall

References

• Site Recovery official support portal for your model.
• Site Recovery community forum + Reddit threads.
• Vendor PSIRT / advisory page (where applicable).

Reference material, not professional advice. Validate with your vendor manual and follow local regulations.

Common patterns we see

When this symptom shows up on this device, three patterns repeat:

1. Recent service version update changed behavior: the symptom started within a week of an OTA push. Rollback or wait for the hotfix. 2. Environmental trigger, temperature, humidity, line voltage, network changes. Look at what changed in the environment. 3. Cumulative wear. components like batteries, gaskets, fans degrade over time. Replace the consumable rather than chasing a software fix.

Knowing which pattern applies saves time on the wrong fix.

Before you start

A few things to confirm so the hardware fix goes cleanly:

• Latest service version downloaded if you're going to update.
• support coverage + support contract status checked, opening managed parts may void it.
• Backup of current configuration (where applicable) taken.
• Spare parts on hand if you anticipate replacement.
• Adequate workspace, lighting, and time: rushing causes regressions.

Quick verification

Before you walk away from the affected device fix, run through:

1. Reproduce the original trigger, does the issue reappear? 2. Check the device's status / health screen for any new alerts. 3. Confirm paired devices (app, hub, controller) reconnected. 4. Save / commit any configuration changes per the device's normal workflow. 5. Note the change in your maintenance log with date + service version version.

Escalation guide

For this hardware, the right escalation depends on impact:

• Cosmetic / minor: log a ticket via the How app or web portal. Response 1-3 business days.
• Mid-impact: phone support. Have your serial number ready.
• Critical (production down, safety issue): in-person dealer / TAC visit. Bring proof of purchase.
• Out of support coverage: third-party repair shop with manufacturer-certified technicians.

More frequently asked questions

Why is this happening on a brand-new unit?

Out-of-box defects do occur. If you've owned the device under 30 days and the symptom persists after a tenant reset, escalate to the seller for replacement under DOA terms before opening a manufacturer support case.

Does this affect other devices on my network?

Generally no. The procedure is local to this device. Network-side changes (service version updates that affect TLS, SMB, or routing) are flagged explicitly in the steps.

Is it safe to apply during business hours?

If the device is in production use, apply during a scheduled maintenance window. Most procedures need 2-15 minutes of downtime. Capture pre-change state so you can roll back if needed.

How long does this fix usually take?

Most users complete the steps in 20-45 minutes the first time, and 5-10 minutes on subsequent runs once the menu paths are familiar.

Will this void my support coverage?

Applying official service version updates and following the user manual will not affect support coverage. Opening managed services, jumping safety circuits, or using third-party parts can void support coverage in most jurisdictions.

Field notes from real Azure Enterprise incidents

When I work on set up Azure DNS Private Resolver on Site Recovery the rhythm I lean on is the one I have built over years of these tickets. Network Watcher's connectivity check has saved me from blaming Azure when the problem turned out to be a stale NSG rule someone left behind from a pilot. When a customer says 'Azure broke', the answer is almost always either RBAC propagation lag or a quota that quietly tightened on a region they did not check. I have lost more hours to Azure Resource Graph queries than I would like to admit, but the alternative. clicking through the portal hoping the right blade loads, is worse.

Tools I actually reach for

For set up Azure DNS Private Resolver on Site Recovery on Site Recovery the cheapest signal I can land usually comes from kubectl (for AKS), then Network Watcher, Azure Activity Log, Azure Advisor, Azure Monitor Logs (Kusto) when kubectl (for AKS) cannot see the layer the fault sits in, and Azure Resource Graph Explorer for the cases where neither of those answers cleanly. That ordering is not academic. It matches the layers the failure tends to surface through, so the cheap signal lands first and the heavier tooling only comes out when the simpler answer does not hold up under scrutiny.

Verification I run before I close the ticket

Before I mark set up Azure DNS Private Resolver on Site Recovery resolved on a Site Recovery unit, the verification loop below is what I actually run. Each step proves a different layer is green, and the order matters - the cheap checks gate the more expensive ones.

az network watcher test-connectivity --source-resource VM1 --dest-resource VM2

If that one comes back clean, move to the next check. If it does not, stop and dig in there before layering more verification on top of a red signal.

az account show --query '{sub:id,tenant:tenantId}' -o table

If that one comes back clean, move to the next check. If it does not, stop and dig in there before layering more verification on top of a red signal.

az monitor activity-log list --resource-group RG --max-events 25 -o table

If that one comes back clean, move to the next check. If it does not, stop and dig in there before layering more verification on top of a red signal.

az aks browse --resource-group RG --name CLUSTER  # verify dashboard reachable

Only when every line above runs clean do I close the ticket and update the runbook with the timestamps.

Where I check first when the docs disagree

When two sources contradict each other on a Azure Enterprise detail, the disambiguation order I lean on is stable. I usually start at azurecharts.com for the ground-truth view on Azure Enterprise. I usually start at azure.microsoft.com/updates for the ground-truth view on Azure Enterprise. I usually start at github.com/Azure for the ground-truth view on Azure Enterprise. Random blog posts and reseller wikis are signal, not ground truth, and I treat them as such until the references above either confirm or contradict the claim.

Pitfalls I have walked into on this exact path

The shortcuts that look smart on set up Azure DNS Private Resolver on Site Recovery have a habit of biting back. The pitfalls below are the ones I have personally walked into on a Site Recovery unit, not things I read about. When a customer says 'Azure broke', the answer is almost always either RBAC propagation lag or a quota that quietly tightened on a region they did not check. I have lost more hours to Azure Resource Graph queries than I would like to admit, but the alternative: clicking through the portal hoping the right blade loads, is worse. Activity Log is the first place I open on any Azure regression because the operation that flipped the state is usually right there at the top of the list. When in doubt I revert to the slower path that the manual prescribes - the time I save by skipping it is always smaller than the time I spend cleaning up afterwards.

What I tell the next on-call

When I hand set up Azure DNS Private Resolver on Site Recovery off to the next person on rotation, the three lines I leave in the runbook are these. First, the symptom signature for Site Recovery on the Azure Enterprise family - not a paraphrase, the exact string that surfaces. Second, the diagnostic that gave the highest signal in the least time. Third, the exact verification command whose green output justified closing the ticket. That trio is what turns a one-off fix into a runbook entry the next engineer can use without paging me at three in the morning.

I also add a one-line note on the cost of getting this wrong. For set up Azure DNS Private Resolver on Site Recovery on a Site Recovery unit, the cost is rarely the replacement part. It is the downtime, the second site visit, and the trust deficit you spend with whoever owns the asset when the fix does not hold. That framing keeps the next on-call from choosing the cheap-looking shortcut that ends up costing the most in elapsed hours and goodwill.