Deployment Automation

Nokia 7250 IXR-S: How to deploy with a Python script (paramiko / netmiko / native API)

Q: Where can I find the Nokia official documentation?

https://documentation.nokia.com — search the product family + feature name.

By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30

⚡ At a glance

Vendor	Nokia
Operating system	SR OS / SR Linux
Category	Deployment Automation
Skill level	Intermediate to advanced
DIY-able?	Yes with CLI access; some scenarios need Nokia Customer Care + RMA.

Fleet automation on Nokia works best when you treat SR OS / SR Linux as immutable infra: declare desired state, push, verify, rollback on drift. The 7250 IXR-R6 family is well-suited to this because the config model is consistent across software trains.

Use admin save explicitly: relying on auto-persist is one of those things that works fine until it does not, usually during a reload at the worst possible time.

The runbook below is the same shape I use in production. Read it once end-to-end before adapting; do not cherry-pick steps.

What this guide covers

How to deploy with a Python script (paramiko / netmiko / native API) for Nokia 7250 IXR-S (SR OS / SR Linux).

Step-by-step

Choose the automation surface: vendor controller, API, or CLI scripting.
Verify reachability + credentials from your automation host.
Test the change on a single device + maintenance window.
Roll out in waves of 10-20 devices to limit blast radius.
Pre-collect baseline, push the change, post-collect; diff.
Roll back any device whose post-check fails.

Sample CLI invocation

# Manual baseline
show version
show chassis
show port

# Push change (via vendor CLI)
configure
/configure router interface to-customer address 10.0.0.1/24
commit
admin save

# Verify
show port

Best practices

Always test on a single device or sandbox before fleet rollout.
Keep configurations in version control (Git).
Use AAA + RBAC for the automation account; never embed credentials in code.
Build pre/post-change validation into your pipeline.

Frequently asked questions

Will this work on my specific SR OS / SR Linux version?

The procedure reflects current SR OS / SR Linux behaviour. Older releases may need minor syntax adjustments, use the CLI help (? or tab-completion) to verify.

Should I open a Nokia Customer Care case immediately?

Open one if you suspect hardware failure or the symptom persists after a maintenance-window reload. Make sure your support entitlement is active first.

Where can I find the Nokia official documentation?

https://documentation.nokia.com. search the product family + feature name.

Is this procedure safe in production?

Test in a lab or maintenance window first. Capture pre-change state so you can roll back.

All Nokia fix guides → /nokia/
All vendor guides → /vendors/

Related guides worth a look while you sort this one out:

References

Nokia support portal: https://customer.nokia.com
Nokia knowledge base: https://documentation.nokia.com
Nokia security advisories: https://www.nokia.com/about-us/security/vulnerability-management/
Open a case: https://customer.nokia.com

Reference material, not professional advice. Validate against your specific SR OS / SR Linux version and test in a non-production environment before applying.

Common patterns we see

When this symptom shows up on a Nokia device, three patterns repeat:

1. Recent firmware update changed behavior, the symptom started within a week of an OTA push. Rollback or wait for the hotfix. 2. Environmental trigger: temperature, humidity, line voltage, network changes. Look at what changed in the environment. 3. Cumulative wear, components like batteries, gaskets, fans degrade over time. Replace the consumable rather than chasing a software fix.

Knowing which pattern applies saves time on the wrong fix.

Safety + preconditions

Before any work on a Nokia device:

Unplug from mains for any internal-access procedure.
Discharge stored energy (capacitors in PSUs, residual battery charge) per manufacturer guidance.
Use ESD-safe handling for boards and modules. no carpet, no wool sleeves.
Avoid moisture; never apply liquids near vents or connectors.
If you smell smoke, see scorch marks, or feel uneven heat, stop and escalate.

How to confirm it's actually fixed

On a Nokia device, the test is rarely "reboot and see". Use this list:

Active reproduction: trigger the original failure path on purpose.
Indirect reproduction: do an activity that would expose the same subsystem.
Status indicator review: every LED / display / app status should be green.
24-hour soak: leave the device under normal load overnight; check the next morning.
Telemetry check: review the device or app's diagnostic log for new error entries.

When to call Nokia support instead

Escalate if:

The same symptom returns within 24 hours of a clean fix.
You see physical damage (burn marks, swollen battery, cracked PCB).
The device is in warranty and a hardware replacement is the cheaper outcome.
Repair requires specialised tools you don't own (alignment jigs, calibration software).
Following the official path keeps the warranty intact, which matters more than the time spent.