Nokia: OSPF duplicate router-id

By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30

What this guide covers

Diagnose and fix OSPF duplicate router-id on a Nokia device (SR OS / SR Linux).

Most likely cause + fix

Two routers using the same router-id. Set router-id explicitly.

Diagnostic CLI

show port
# Use the SR OS / SR Linux equivalents of:
#   show ip route / show route
#   show ip bgp summary / show bgp summary
#   show ip ospf neighbor / show ospf neighbor
#   show log | include BGP|OSPF

When the issue persists

• Capture admin tech-support and open a Nokia Customer Care case.
• Cross-reference https://customer.nokia.com for known issues in your release.

Frequently asked questions

Will this work on my specific SR OS / SR Linux version?

The procedure reflects current SR OS / SR Linux behaviour. Older releases may need minor syntax adjustments. use the CLI help (? or tab-completion) to verify.

Should I open a Nokia Customer Care case immediately?

Open one if you suspect hardware failure or the symptom persists after a maintenance-window reload. Make sure your support entitlement is active first.

Where can I find the Nokia official documentation?

https://documentation.nokia.com, search the product family + feature name.

Is this procedure safe in production?

Test in a lab or maintenance window first. Capture pre-change state so you can roll back.

Related guides

• All Nokia fix guides → /nokia/
• All vendor guides → /vendors/

Related fixes

Related guides worth a look while you sort this one out:

• Nokia router: duplicate IP address detected
• Best Nokia router for branch office
• Best Nokia router for enterprise data centre
• Best Nokia router for retail store
• Best Nokia router for SD-WAN deployment
• Best Nokia router for small office

References

• Nokia support portal: https://customer.nokia.com
• Nokia knowledge base: https://documentation.nokia.com
• Nokia security advisories: https://www.nokia.com/about-us/security/vulnerability-management/
• Open a case: https://customer.nokia.com

Reference material, not professional advice. Validate against your specific SR OS / SR Linux version and test in a non-production environment before applying.

Why this matters for your day-to-day

A Nokia: device that's misbehaving costs more than the fix itself: lost productivity, missed calls, security risk, even safety risk in some categories. Treating the symptom quickly with a documented procedure is cheaper than letting it persist. The steps above are written to get you back to working in under an hour where possible, and to flag clearly when escalation is the right call.

Safety + preconditions

Before any work on a Nokia: device:

• Unplug from mains for any internal-access procedure.
• Discharge stored energy (capacitors in PSUs, residual battery charge) per manufacturer guidance.
• Use ESD-safe handling for boards and modules: no carpet, no wool sleeves.
• Avoid moisture; never apply liquids near vents or connectors.
• If you smell smoke, see scorch marks, or feel uneven heat, stop and escalate.

How to confirm it's actually fixed

On a Nokia: device, the test is rarely "reboot and see". Use this list:

• Active reproduction: trigger the original failure path on purpose.
• Indirect reproduction: do an activity that would expose the same subsystem.
• Status indicator review: every LED / display / app status should be green.
• 24-hour soak: leave the device under normal load overnight; check the next morning.
• Telemetry check: review the device or app's diagnostic log for new error entries.

When to call Nokia: support instead

Escalate if:

• The same symptom returns within 24 hours of a clean fix.
• You see physical damage (burn marks, swollen battery, cracked PCB).
• The device is in warranty and a hardware replacement is the cheaper outcome.
• Repair requires specialised tools you don't own (alignment jigs, calibration software).
• Following the official path keeps the warranty intact, which matters more than the time spent.

More frequently asked questions

How long does this fix usually take?

Most users complete the steps in 20-45 minutes the first time, and 5-10 minutes on subsequent runs once the menu paths are familiar.

Are there safer alternatives for non-technical users?

Yes, the manufacturer's self-service troubleshooter (HP Smart, LG ThinQ, Samsung Members, similar) usually walks through the same steps in a guided UI. Use that first if you're not comfortable with menu paths.

Does this affect other devices on my network?

Generally no. The procedure is local to this device. Network-side changes (firmware updates that affect TLS, SMB, or routing) are flagged explicitly in the steps.

Is it safe to apply during business hours?

If the device is in production use, apply during a scheduled maintenance window. Most procedures need 2-15 minutes of downtime. Capture pre-change state so you can roll back if needed.

How often should I run preventive checks?

Quarterly for most consumer devices; monthly for production / commercial devices. Set a calendar reminder so the device stays healthy between issues.