Nokia: How to use SCP / SFTP instead of TFTP for file transfer
By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30
| Vendor | Nokia |
|---|---|
| Operating system | SR OS / SR Linux |
| Category | Hardening & Safe Protocols |
| Skill level | Intermediate to advanced |
| DIY-able? | Yes with CLI access; some scenarios need Nokia Customer Care + RMA. |
What this guide covers
How to use SCP / SFTP instead of TFTP for file transfer on Nokia devices (SR OS / SR Linux).
Recommendation
TFTP is unauthenticated + clear-text. Enable SCP / SFTP: both ride over SSH and authenticate.
CLI / commands
# Entered from: configure
/configure router interface to-customer address 10.0.0.1/24
commit
# Save / commit
admin save
Verify
- Test from a non-admin workstation.
- Confirm fallback works if AAA or external service is down.
- Document the change in your CMDB / change-control.
Frequently asked questions
Will this work on my specific SR OS / SR Linux version?
The procedure reflects current SR OS / SR Linux behaviour. Older releases may need minor syntax adjustments, use the CLI help (? or tab-completion) to verify.
Should I open a Nokia Customer Care case immediately?
Open one if you suspect hardware failure or the symptom persists after a maintenance-window reload. Make sure your support entitlement is active first.
Where can I find the Nokia official documentation?
https://documentation.nokia.com. search the product family + feature name.
Is this procedure safe in production?
Test in a lab or maintenance window first. Capture pre-change state so you can roll back.
Related guides
Related fixes
Related guides worth a look while you sort this one out:
- Nokia: How to use modern password hashing (no clear-text)
- Nokia: How to configure logging to a central SIEM
- Nokia: How to disable unused services and protocols
- Nokia: How to enable control-plane policing / rate-limiting
- Nokia: How to enable HTTPS-only management
- Nokia: How to enable management ACL to lock down access
References
- Nokia support portal: https://customer.nokia.com
- Nokia knowledge base: https://documentation.nokia.com
- Nokia security advisories: https://www.nokia.com/about-us/security/vulnerability-management/
- Open a case: https://customer.nokia.com
Reference material, not professional advice. Validate against your specific SR OS / SR Linux version and test in a non-production environment before applying.
Common patterns we see
When this symptom shows up on a Nokia: device, three patterns repeat:
1. Recent firmware update changed behavior, the symptom started within a week of an OTA push. Rollback or wait for the hotfix. 2. Environmental trigger: temperature, humidity, line voltage, network changes. Look at what changed in the environment. 3. Cumulative wear, components like batteries, gaskets, fans degrade over time. Replace the consumable rather than chasing a software fix.
Knowing which pattern applies saves time on the wrong fix.
Before you start
A few things to confirm so the Nokia: device fix goes cleanly:
- Latest firmware downloaded if you're going to update.
- Warranty + support contract status checked. opening sealed parts may void it.
- Backup of current configuration (where applicable) taken.
- Spare parts on hand if you anticipate replacement.
- Adequate workspace, lighting, and time, rushing causes regressions.
Quick verification
Before you walk away from a Nokia: device fix, run through:
1. Reproduce the original trigger: does the issue reappear? 2. Check the device's status / health screen for any new alerts. 3. Confirm paired devices (app, hub, controller) reconnected. 4. Save / commit any configuration changes per the device's normal workflow. 5. Note the change in your maintenance log with date + firmware version.
When to call Nokia: support instead
Escalate if:
- The same symptom returns within 24 hours of a clean fix.
- You see physical damage (burn marks, swollen battery, cracked PCB).
- The device is in warranty and a hardware replacement is the cheaper outcome.
- Repair requires specialised tools you don't own (alignment jigs, calibration software).
- Following the official path keeps the warranty intact, which matters more than the time spent.
More frequently asked questions
Does this affect other devices on my network?
Generally no. The procedure is local to this device. Network-side changes (firmware updates that affect TLS, SMB, or routing) are flagged explicitly in the steps.
Will the procedure work on the international variant?
Some features and firmware paths are region-locked. Check the model spec sheet to confirm your variant supports the menu option referenced. If you're outside the US/EU, look for the regional support portal.
Can I roll this back if something breaks?
Yes for software-level changes (firmware rollback, config rollback). Hardware changes are usually one-way. Always back up settings before starting.
Why is this happening on a brand-new unit?
Out-of-box defects do occur. If you've owned the device under 30 days and the symptom persists after a factory reset, escalate to the seller for replacement under DOA terms before opening a manufacturer support case.
Should I update firmware first or last?
Update firmware first if a release note specifically mentions your symptom. Otherwise, finish the troubleshooting flow first, then update; that way you can isolate whether the update or the underlying fix solved it.