Nvidia (Mellanox): How to replace Telnet with SSH

By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30

What this guide covers

How to replace Telnet with SSH on Nvidia (Mellanox) devices (Cumulus Linux / NVOS / SONiC).

Recommendation

Enable SSHv2 only; remove Telnet from the management interface; restrict to admin source IPs.

CLI / commands

# Entered from: nv config (NVUE)
nv set interface swp1 ip address 10.0.0.1/24
nv config apply

# Save / commit
nv config save

Verify

• Test from a non-admin workstation.
• Confirm fallback works if AAA or external service is down.
• Document the change in your CMDB / change-control.

Frequently asked questions

Will this work on my specific Cumulus Linux / NVOS / SONiC version?

The procedure reflects current Cumulus Linux / NVOS / SONiC behaviour. Older releases may need minor syntax adjustments, use the CLI help (? or tab-completion) to verify.

Should I open a Nvidia Enterprise Support case immediately?

Open one if you suspect hardware failure or the symptom persists after a maintenance-window reload. Make sure your support entitlement is active first.

Where can I find the Nvidia (Mellanox) official documentation?

https://docs.nvidia.com/networking/: search the product family + feature name.

Is this procedure safe in production?

Test in a lab or maintenance window first. Capture pre-change state so you can roll back.

Related guides

• All Nvidia (Mellanox) fix guides → /nvidia/
• All vendor guides → /vendors/

Related fixes

Related guides worth a look while you sort this one out:

• Nvidia (Mellanox): How to enable NETCONF or vendor API over SSH
• Nvidia (Mellanox): How to replace SNMPv2c with SNMPv3
• Nvidia (Mellanox): How to configure logging to a central SIEM
• Nvidia (Mellanox): How to disable unused services and protocols
• Nvidia (Mellanox): How to enable control-plane policing / rate-limiting
• Nvidia (Mellanox): How to enable HTTPS-only management

References

• Nvidia (Mellanox) support portal: https://enterprise-support.nvidia.com/
• Nvidia (Mellanox) knowledge base: https://docs.nvidia.com/networking/
• Nvidia (Mellanox) security advisories: https://www.nvidia.com/en-us/security/
• Open a case: https://enterprise-support.nvidia.com/s/createcase

Reference material, not professional advice. Validate against your specific Cumulus Linux / NVOS / SONiC version and test in a non-production environment before applying.

What changed recently?

Fault diagnosis on a Nvidia device goes faster when you map the symptom to a recent change:

• Did firmware update in the last 7 days?
• Did the network (router, ISP, VPN) change?
• Was the device moved physically?
• Did paired devices (phone, hub, app) update?
• Were any accessories swapped in or out?

The answer narrows the root cause to a manageable subset.

Before you start

A few things to confirm so the Nvidia device fix goes cleanly:

• Latest firmware downloaded if you're going to update.
• Warranty + support contract status checked, opening sealed parts may void it.
• Backup of current configuration (where applicable) taken.
• Spare parts on hand if you anticipate replacement.
• Adequate workspace, lighting, and time. rushing causes regressions.

Quick verification

Before you walk away from a Nvidia device fix, run through:

1. Reproduce the original trigger, does the issue reappear? 2. Check the device's status / health screen for any new alerts. 3. Confirm paired devices (app, hub, controller) reconnected. 4. Save / commit any configuration changes per the device's normal workflow. 5. Note the change in your maintenance log with date + firmware version.

When to call Nvidia support instead

Escalate if:

• The same symptom returns within 24 hours of a clean fix.
• You see physical damage (burn marks, swollen battery, cracked PCB).
• The device is in warranty and a hardware replacement is the cheaper outcome.
• Repair requires specialised tools you don't own (alignment jigs, calibration software).
• Following the official path keeps the warranty intact, which matters more than the time spent.

More frequently asked questions

Will this void my warranty?

Applying official firmware updates and following the user manual will not affect warranty. Opening sealed components, jumping safety circuits, or using third-party parts can void warranty in most jurisdictions.

Should I update firmware first or last?

Update firmware first if a release note specifically mentions your symptom. Otherwise, finish the troubleshooting flow first, then update; that way you can isolate whether the update or the underlying fix solved it.

Will the procedure work on the international variant?

Some features and firmware paths are region-locked. Check the model spec sheet to confirm your variant supports the menu option referenced. If you're outside the US/EU, look for the regional support portal.

How often should I run preventive checks?

Quarterly for most consumer devices; monthly for production / commercial devices. Set a calendar reminder so the device stays healthy between issues.

Are there safer alternatives for non-technical users?

Yes: the manufacturer's self-service troubleshooter (HP Smart, LG ThinQ, Samsung Members, similar) usually walks through the same steps in a guided UI. Use that first if you're not comfortable with menu paths.