Deployment Automation

Nvidia (Mellanox) SN2410: How to deploy with Ansible

Q: Where can I find the Nvidia (Mellanox) official documentation?

https://docs.nvidia.com/networking/ — search the product family + feature name.

By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30

⚡ At a glance

Vendor	Nvidia (Mellanox)
Operating system	Cumulus Linux / NVOS / SONiC
Category	Deployment Automation
Skill level	Intermediate to advanced
DIY-able?	Yes with CLI access; some scenarios need Nvidia Enterprise Support + RMA.

Automation pipelines targeting Nvidia (Mellanox) share a common shape: render desired config, validate against Cumulus Linux / NVOS / SONiC syntax, stage, push, verify, persist. The SN2410 platform follows that shape too. it is the credential and authorization story that varies.

Persisting changes via nv config save is the step engineers forget when they are used to vendors that auto-commit. On Cumulus Linux / NVOS / SONiC you get one chance per reload to make changes survive; miss it and your pipeline silently produces ephemeral state.

The walkthrough below is exactly what I run against customer fleets, minus the credential bits, which belong in your secret manager.

What this guide covers

How to deploy with Ansible for Nvidia (Mellanox) SN2410 (Cumulus Linux / NVOS / SONiC).

Step-by-step

Choose the automation surface: vendor controller, API, or CLI scripting.
Verify reachability + credentials from your automation host.
Test the change on a single device + maintenance window.
Roll out in waves of 10-20 devices to limit blast radius.
Pre-collect baseline, push the change, post-collect; diff.
Roll back any device whose post-check fails.

Sample CLI invocation

# Manual baseline
nv show system
nv show platform inventory
nv show interface

# Push change (via vendor CLI)
nv config (NVUE)
nv set interface swp1 ip address 10.0.0.1/24
nv config apply
nv config save

# Verify
nv show interface

Best practices

Always test on a single device or sandbox before fleet rollout.
Keep configurations in version control (Git).
Use AAA + RBAC for the automation account; never embed credentials in code.
Build pre/post-change validation into your pipeline.

Frequently asked questions

Will this work on my specific Cumulus Linux / NVOS / SONiC version?

The procedure reflects current Cumulus Linux / NVOS / SONiC behaviour. Older releases may need minor syntax adjustments: use the CLI help (? or tab-completion) to verify.

Should I open a Nvidia Enterprise Support case immediately?

Open one if you suspect hardware failure or the symptom persists after a maintenance-window reload. Make sure your support entitlement is active first.

Where can I find the Nvidia (Mellanox) official documentation?

https://docs.nvidia.com/networking/, search the product family + feature name.

Is this procedure safe in production?

Test in a lab or maintenance window first. Capture pre-change state so you can roll back.

All Nvidia (Mellanox) fix guides → /nvidia/
All vendor guides → /vendors/

Related guides worth a look while you sort this one out:

References

Nvidia (Mellanox) support portal: https://enterprise-support.nvidia.com/
Nvidia (Mellanox) knowledge base: https://docs.nvidia.com/networking/
Nvidia (Mellanox) security advisories: https://www.nvidia.com/en-us/security/
Open a case: https://enterprise-support.nvidia.com/s/createcase

Reference material, not professional advice. Validate against your specific Cumulus Linux / NVOS / SONiC version and test in a non-production environment before applying.

Common patterns we see

When this symptom shows up on a Nvidia device, three patterns repeat:

1. Recent firmware update changed behavior. the symptom started within a week of an OTA push. Rollback or wait for the hotfix. 2. Environmental trigger, temperature, humidity, line voltage, network changes. Look at what changed in the environment. 3. Cumulative wear: components like batteries, gaskets, fans degrade over time. Replace the consumable rather than chasing a software fix.

Knowing which pattern applies saves time on the wrong fix.

Safety + preconditions

Before any work on a Nvidia device:

Unplug from mains for any internal-access procedure.
Discharge stored energy (capacitors in PSUs, residual battery charge) per manufacturer guidance.
Use ESD-safe handling for boards and modules, no carpet, no wool sleeves.
Avoid moisture; never apply liquids near vents or connectors.
If you smell smoke, see scorch marks, or feel uneven heat, stop and escalate.

Quick verification

Before you walk away from a Nvidia device fix, run through:

1. Reproduce the original trigger. does the issue reappear? 2. Check the device's status / health screen for any new alerts. 3. Confirm paired devices (app, hub, controller) reconnected. 4. Save / commit any configuration changes per the device's normal workflow. 5. Note the change in your maintenance log with date + firmware version.

When to call Nvidia support instead

Escalate if:

The same symptom returns within 24 hours of a clean fix.
You see physical damage (burn marks, swollen battery, cracked PCB).
The device is in warranty and a hardware replacement is the cheaper outcome.
Repair requires specialised tools you don't own (alignment jigs, calibration software).
Following the official path keeps the warranty intact, which matters more than the time spent.