Hardware Failure

Nvidia (Mellanox) SN2410 single port dead: Diagnose & Fix

Q: Where can I find the Nvidia (Mellanox) official documentation?

https://docs.nvidia.com/networking/ — search the product family + feature name.

By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30

⚡ At a glance

Vendor	Nvidia (Mellanox)
Operating system	Cumulus Linux / NVOS / SONiC
Category	Hardware Failure
Skill level	Intermediate to advanced
DIY-able?	Yes with CLI access; some scenarios need Nvidia Enterprise Support + RMA.

A Nvidia (Mellanox) platform behaving badly is usually one of three things: a thermal/PSU issue caught by `nv show platform environment`, a transceiver problem caught by `nv show interface swp1`, or a boot-loader hang you only see on the console. Cumulus Linux / NVOS / SONiC surfaces all three differently from competitors, so the diagnostic order matters.

I will be honest: on the SN2410 family I have seen at least one false-positive from the on-box monitoring per quarter. Always cross-check what `nv show system` and `nv show platform environment` reports against the physical front-panel and a smell test of the chassis.

If this is your first Nvidia (Mellanox) hardware issue, the good news is that Nvidia Enterprise Support is competent and the part-replacement RMA cycle is usually under a week for a covered unit.

What this guide covers

Diagnose and recover from single port dead on a Nvidia (Mellanox) SN2410.

Step-by-step

Move the cable to an adjacent known-good port, if it works, the port is the problem.
Try a different cable on the suspect port. rules out the cable.
Visual-inspect the RJ-45 / SFP cage, bent pins, debris.
If optical, try a different transceiver.
Clean fibre ferrules.
If genuinely dead, leave the port disabled and RMA at next refresh.

CLI / commands

# Verify hardware state
nv show system
nv show platform inventory
nv show platform environment

# Collect for Nvidia Enterprise Support
cl-support (Cumulus) / show techsupport (SONiC)

When to RMA

Repeated failure after re-seat and power-cycle
Visible burn, scorching, or physical damage
POST or memory diagnostic failure
Hardware crashinfo without a software workaround

Frequently asked questions

Will this work on my specific Cumulus Linux / NVOS / SONiC version?

The procedure reflects current Cumulus Linux / NVOS / SONiC behaviour. Older releases may need minor syntax adjustments: use the CLI help (? or tab-completion) to verify.

Should I open a Nvidia Enterprise Support case immediately?

Open one if you suspect hardware failure or the symptom persists after a maintenance-window reload. Make sure your support entitlement is active first.

Where can I find the Nvidia (Mellanox) official documentation?

https://docs.nvidia.com/networking/, search the product family + feature name.

Is this procedure safe in production?

Test in a lab or maintenance window first. Capture pre-change state so you can roll back.

All Nvidia (Mellanox) fix guides → /nvidia/
All vendor guides → /vendors/

Related guides worth a look while you sort this one out:

References

Nvidia (Mellanox) support portal: https://enterprise-support.nvidia.com/
Nvidia (Mellanox) knowledge base: https://docs.nvidia.com/networking/
Nvidia (Mellanox) security advisories: https://www.nvidia.com/en-us/security/
Open a case: https://enterprise-support.nvidia.com/s/createcase

Reference material, not professional advice. Validate against your specific Cumulus Linux / NVOS / SONiC version and test in a non-production environment before applying.

Common patterns we see

When this symptom shows up on a Nvidia device, three patterns repeat:

1. Recent firmware update changed behavior. the symptom started within a week of an OTA push. Rollback or wait for the hotfix. 2. Environmental trigger, temperature, humidity, line voltage, network changes. Look at what changed in the environment. 3. Cumulative wear: components like batteries, gaskets, fans degrade over time. Replace the consumable rather than chasing a software fix.

Knowing which pattern applies saves time on the wrong fix.

Safety + preconditions

Before any work on a Nvidia device:

Unplug from mains for any internal-access procedure.
Discharge stored energy (capacitors in PSUs, residual battery charge) per manufacturer guidance.
Use ESD-safe handling for boards and modules, no carpet, no wool sleeves.
Avoid moisture; never apply liquids near vents or connectors.
If you smell smoke, see scorch marks, or feel uneven heat, stop and escalate.

Quick verification

Before you walk away from a Nvidia device fix, run through:

1. Reproduce the original trigger. does the issue reappear? 2. Check the device's status / health screen for any new alerts. 3. Confirm paired devices (app, hub, controller) reconnected. 4. Save / commit any configuration changes per the device's normal workflow. 5. Note the change in your maintenance log with date + firmware version.

When to call Nvidia support instead

Escalate if:

The same symptom returns within 24 hours of a clean fix.
You see physical damage (burn marks, swollen battery, cracked PCB).
The device is in warranty and a hardware replacement is the cheaper outcome.
Repair requires specialised tools you don't own (alignment jigs, calibration software).
Following the official path keeps the warranty intact, which matters more than the time spent.