Hardware Failure

Nvidia (Mellanox) SN2700 smoke smell or burned PCB: Diagnose & Fix

Q: Where can I find the Nvidia (Mellanox) official documentation?

https://docs.nvidia.com/networking/ — search the product family + feature name.

By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30

⚡ At a glance

Vendor	Nvidia (Mellanox)
Operating system	Cumulus Linux / NVOS / SONiC
Category	Hardware Failure
Skill level	Intermediate to advanced
DIY-able?	Yes with CLI access; some scenarios need Nvidia Enterprise Support + RMA.

A Nvidia (Mellanox) platform behaving badly is usually one of three things: a thermal/PSU issue caught by `nv show platform environment`, a transceiver problem caught by `nv show interface swp1`, or a boot-loader hang you only see on the console. Cumulus Linux / NVOS / SONiC surfaces all three differently from competitors, so the diagnostic order matters.

I will be honest: on the SN2700 family I have seen at least one false-positive from the on-box monitoring per quarter. Always cross-check what `nv show system` and `nv show platform environment` reports against the physical front-panel and a smell test of the chassis.

If this is your first Nvidia (Mellanox) hardware issue, the good news is that Nvidia Enterprise Support is competent and the part-replacement RMA cycle is usually under a week for a covered unit.

What this guide covers

Diagnose and recover from smoke smell or burned PCB on a Nvidia (Mellanox) SN2700.

Step-by-step

STOP. Power off the device at the wall before touching it.
Open the chassis and identify which board / module is the source of the smell.
Photograph the visible damage (scorched capacitors, blackened ICs).
Note the device serial number and exact model for the support case.
Do not power back on, burned components fail closed and can damage adjacent boards.
Open a Nvidia Enterprise Support case with the photos and serial.
RMA the affected component (line card, supervisor, PSU) or the full chassis if the backplane is damaged.

CLI / commands

# Verify hardware state
nv show system
nv show platform inventory
nv show platform environment

# Collect for Nvidia Enterprise Support
cl-support (Cumulus) / show techsupport (SONiC)

When to RMA

Repeated failure after re-seat and power-cycle
Visible burn, scorching, or physical damage
POST or memory diagnostic failure
Hardware crashinfo without a software workaround

Frequently asked questions

Will this work on my specific Cumulus Linux / NVOS / SONiC version?

The procedure reflects current Cumulus Linux / NVOS / SONiC behaviour. Older releases may need minor syntax adjustments. use the CLI help (? or tab-completion) to verify.

Should I open a Nvidia Enterprise Support case immediately?

Open one if you suspect hardware failure or the symptom persists after a maintenance-window reload. Make sure your support entitlement is active first.

Where can I find the Nvidia (Mellanox) official documentation?

https://docs.nvidia.com/networking/, search the product family + feature name.

Is this procedure safe in production?

Test in a lab or maintenance window first. Capture pre-change state so you can roll back.

All Nvidia (Mellanox) fix guides → /nvidia/
All vendor guides → /vendors/

Related guides worth a look while you sort this one out:

References

Nvidia (Mellanox) support portal: https://enterprise-support.nvidia.com/
Nvidia (Mellanox) knowledge base: https://docs.nvidia.com/networking/
Nvidia (Mellanox) security advisories: https://www.nvidia.com/en-us/security/
Open a case: https://enterprise-support.nvidia.com/s/createcase

Reference material, not professional advice. Validate against your specific Cumulus Linux / NVOS / SONiC version and test in a non-production environment before applying.

Why this matters for your day-to-day

A Nvidia device that's misbehaving costs more than the fix itself: lost productivity, missed calls, security risk, even safety risk in some categories. Treating the symptom quickly with a documented procedure is cheaper than letting it persist. The steps above are written to get you back to working in under an hour where possible, and to flag clearly when escalation is the right call.

Safety + preconditions

Before any work on a Nvidia device:

Unplug from mains for any internal-access procedure.
Discharge stored energy (capacitors in PSUs, residual battery charge) per manufacturer guidance.
Use ESD-safe handling for boards and modules: no carpet, no wool sleeves.
Avoid moisture; never apply liquids near vents or connectors.
If you smell smoke, see scorch marks, or feel uneven heat, stop and escalate.

Quick verification

Before you walk away from a Nvidia device fix, run through:

1. Reproduce the original trigger, does the issue reappear? 2. Check the device's status / health screen for any new alerts. 3. Confirm paired devices (app, hub, controller) reconnected. 4. Save / commit any configuration changes per the device's normal workflow. 5. Note the change in your maintenance log with date + firmware version.

Escalation guide

For a Nvidia device, the right escalation depends on impact:

Cosmetic / minor: log a ticket via the Nvidia app or web portal. Response 1-3 business days.
Mid-impact: phone support. Have your serial number ready.
Critical (production down, safety issue): in-person dealer / TAC visit. Bring proof of purchase.
Out of warranty: third-party repair shop with manufacturer-certified technicians.