Azure Linux 3.0 (CBL-Mariner)

seccomp RuntimeDefault errno 1 on Azure Linux: what causes it and how to fix

By Sai Kiran Pandrala · Last verified: 2026-05-31 · Source: community Q&A, distro forums (Ubuntu Discourse, Fedora Discussion, Arch BBS, Reddit r/linux, ServerFault, Unix StackExchange), official OS documentation

At a glance

OS / Distro	Azure Linux 3.0 (CBL-Mariner)
Category	Operating Systems
Guide type	Procedure
Skill level	Intermediate to advanced
Time	15 - 60 minutes including verification

If you hit seccomp RuntimeDefault errno 1 on Azure Linux, what causes it and how to fix on Azure Linux 3.0 (CBL-Mariner) in production, the steps below are the path most sysadmins take in 2026. None of them require opening a vendor case unless you are running a paid enterprise distro.

What seccomp runtimedefault errno 1 on azure linux, what causes it and how to fix actually involves on Azure Linux 3.0 (CBL-Mariner)

The seccomp RuntimeDefault errno 1 error on Azure Linux typically surfaces with the message "Operation not permitted: errno 1 seccomp". The exact code or signature line is what you grep for in the distro forum, ServerFault, or Unix StackExchange, not the human-readable sentence next to it.

On Azure Linux this most often comes from one of three causes: a configuration file or unit override that drifted, a missing package or kernel module, or a resource limit (disk, RAM, file handles, inodes). The fix path differs by which.

The rest of this page is the structured fix path. Start with diagnose, then remediation, then the automation options so you do not have to do this by hand the next time it surfaces. Verify and safety sections at the end are the discipline that keeps the fix from regressing in production.

Diagnose first, fix second

Confirm identity and privilege. Run id, sudo -l, getent passwd $USER, and on systems with SSSD run sssctl user-checks $USER. About one in five 'why does this not work' tickets are actually 'I am in the wrong account', 'my Kerberos ticket expired', or 'I am hitting a sudoers rule I did not know about'.

Start by capturing the exact error string verbatim. Many UIs and installers truncate messages in popups, but the system log keeps the full record. Use journalctl -xe on systemd distros, logread on OpenWrt, dmesg for kernel messages, /var/log/messages on RHEL family, /var/log/syslog on Debian family. For ESXi use vmkernel.log in the DCUI. For Solaris use fmadm faulty. For AIX use errpt -a. The exact error code (for example NO_PUBKEY, 0x803fb112, NodeCreationFailure, NW-2-5) is the thing you grep for in forums and Stack Exchange, not the human-readable sentence next to it.

Look at process state and resource pressure before blaming the application. top, htop, iotop, vmstat 1 5, and iostat -xz 1 answer the four questions every Linux incident needs: CPU saturated, memory exhausted, disk I/O bottlenecked, or context-switch storm. About a quarter of {family} 'service is broken' tickets turn out to be 'host is out of RAM and OOM killer fired'.

Solution-focused remediation path

If you cannot reproduce the failure consistently, the cause is probably a race condition, a session-cache issue, or environment drift between two hosts that should be identical. Run the failing operation under strace -f -e trace=openat,connect,read,write -o /tmp/trace in one terminal and a second known-good instance in another. Diff the trace files. The first divergence is almost always the bug.

If storage is suspect, capture both the block-device view and the filesystem view. lsblk -f + blkid + df -hT + du -shx /* + findmnt + mount | column -t. For ZFS use zpool status -v and zfs list -t snapshot. For Btrfs use btrfs filesystem usage / and btrfs subvolume list /. About a third of 'disk full' issues on Btrfs are metadata exhaustion, where df shows free space but the filesystem refuses writes.

When the failure happens in production but not in dev, do not just diff the application. Diff the kernel version, the libc version, the distro release, the SELinux/AppArmor profile, the cgroup tree, and the systemd unit. uname -a + ldd --version + cat /etc/os-release + getenforce + systemctl show <service> --no-pager | grep -E 'CPU|Memory|Tasks' covers the typical surface. One of those is almost always different between the two environments.

Automate this fix so you do not do it twice

Codify the fix as a systemd timer or cron job for unattended remediation

For workflows that need to run unattended (clear a stuck cache, rotate logs, fail over a service, rebuild an index) a systemd timer or a cron job is the right place. Timers can fire on boot, on schedule, or after a dependency unit reaches an active state. systemctl list-timers shows the next-fire time for every active timer. For interactive helper workflows, a wrapper shell script in /usr/local/bin/ documented in MOTD or the team wiki keeps the institutional knowledge accessible.

Automate the fix in shell with systemctl, journalctl, and the package manager

On most Linux and BSD systems the most reliable repair primitives are the built-in CLI tools. systemctl status reveals the current service state, journalctl -u exposes the structured log stream, and systemctl reload or restart applies config changes without a reboot. For package management use the distro tool: apt, dnf, zypper, pacman, pkg, opkg, apk. For hardware and inventory checks the canonical readers are lsblk, lspci, lscpu, dmidecode, and lsmod.

# Template - replace SERVICE with the failing unit name
systemctl status SERVICE --no-pager | head -40
journalctl -u SERVICE -n 100 --no-pager
ss -tlnp | grep -i SERVICE
ls -l /etc/SERVICE/ 2>/dev/null
cat /etc/os-release

Add a manual-approval gate with sudo and auditd for risky fixes

For multi-step fixes that include a destructive action (drop a database, delete a snapshot, fail over a cluster, wipe a partition) gate the script behind sudo with an auditd rule that logs every invocation. The audit trail lives in /var/log/audit/audit.log with the invoking UID and GID and the exact command. For change management requiring a second-person sign-off, wrap the destructive step in a configuration-management approval gate such as Ansible Tower or AWX, Puppet Enterprise, or Salt Master ACL.

Common pitfalls and what to watch for

A subtle pitfall on Azure Linux 3.0 (CBL-Mariner) is that systemctl status and the actual service state can disagree during a config reload. systemctl reload <svc> succeeds whether or not the service actually re-read the config; many services silently keep the old config and the only way to know is to grep the live process for the new value via /proc/<pid>/cwd or ss -tlnp. Always confirm with the service's own status command (nginx -T, sshd -T, postconf -n) during a change window, not by reading the config file you just wrote.

The other pitfall: assuming that an automated remediation is correct because the systemd unit returned 0. A timer that fires on a journal pattern and runs a remediation script should also publish a metric (Prometheus textfile collector, Node Exporter custom metric) for every run; sudden surges in auto-fix invocations are themselves an outage signal. Otherwise you can hide a slow-burn regression behind a quiet remediation loop for weeks.

Verify the fix worked

Reproduce the original symptom path. If it still surfaces on any host, container, or VM in the fleet, you have not fixed it.
Watch for 24 to 48 hours. journalctl --since '24 hours ago' -u <service> -p err and Prometheus query history can mask issues with cached health for 6 to 12 hours, especially for slow-burn memory leaks and disk-fill regressions.
Run a smoke test under realistic load. Happy-path tests miss race conditions, file-descriptor leaks, and cgroup limits.
Capture the new state in a runbook so the next person on call does not have to rediscover this. Push it to Confluence or your team wiki, not into Slack.
If the fix involved a permission or security change, run a CIS Benchmark or DISA STIG audit one more time to confirm you did not open a separate hole while closing this one.

Safety, rollback, blast radius

Test in a non-production VM, container, or namespace if your environment supports it. The cost of one disposable VM is cheaper than one rollback meeting.
Export the existing config before changing it. Most Azure Linux 3.0 (CBL-Mariner) services support --print-defaults, systemctl show, or a documented config-dump command. Capture that to source control before you start.
Know your rollback path. Some Azure Linux 3.0 (CBL-Mariner) operations are one-way (irreversible filesystem upgrade like ext3 to ext4 inline, kernel ABI change, removal of an LVM physical volume). Confirm reversibility on the official OS documentation before you commit.
Be aware of cross-service impact. A change to PAM ripples to every service using it. A change to /etc/resolv.conf affects every name lookup. A change to systemd default.target affects every reboot.
Maintenance window discipline: if the change touches DNS, certificate rotation, kernel upgrade, or anything that emits TLS handshakes, line up a window with stakeholder notification, not a heroic mid-day swap.

FAQ

How long does seccomp runtimedefault errno 1 on azure linux, what causes it and how to fix typically take on this OS?

For most Azure Linux 3.0 (CBL-Mariner) environments, 15 to 60 minutes including verification. Large fleet rollouts, anything touching kernel parameters or initramfs, or cross-data-centre replication can stretch to half a day because you have to wait for package mirrors, configuration management runs, and reboot windows to align.

Is there a rollback path?

Yes for most Azure Linux 3.0 (CBL-Mariner) changes. Back up the existing config to a versioned file first (etckeeper commit, cp file file.bak.$(date +%F), or a Btrfs/ZFS snapshot), then commit it before you change anything. A few operations are one-way (in-place filesystem conversion, partition table rewrite, kernel ABI bump). Check the distro release notes for the specific operation before you commit.

Will this affect dependent services?

Often yes. Azure Linux 3.0 (CBL-Mariner) services are usually consumed by other workloads (application servers, cron jobs, monitoring agents, container runtimes, log shippers). Use systemctl list-dependencies and lsof to enumerate consumers before changing a shared service or configuration file.

What if my distro version does not match these steps?

Distro defaults move between releases. The steps in this page reflect mainstream defaults as of 2026-05-31 but the underlying CLI calls do not change as fast. If a command differs on your version, fall back to man <command> on the host, or the upstream project documentation - those almost always still work.

Where do I get vendor support if I am still stuck?

If you have an Ubuntu Pro, Red Hat, SUSE, Oracle, or Canonical Support subscription, open a case with: the exact error string, the relevant journalctl excerpt, the output of sosreport (RHEL family) or supportconfig (SUSE), and your reproduction steps. The distro forum is the no-cost public alternative - search there first; 80 percent of common Azure Linux 3.0 (CBL-Mariner) issues already have a working answer marked as solved.

References

Official documentation for Azure Linux 3.0 (CBL-Mariner)
Distro forums and community Q&A (Ubuntu Discourse, Fedora Discussion, Arch BBS, openSUSE Forum, Reddit r/linux + distro subreddits, ServerFault, Unix StackExchange)
Vendor status pages and release-notes feeds
CIS Benchmarks and DISA STIG hardening guides for Azure Linux 3.0 (CBL-Mariner)

Related guides worth a look while you sort this one out: