Hardware Failure

Palo Alto Networks PA-220 POST failure on startup: Diagnose & Fix

Q: Where can I find the Palo Alto Networks official documentation?

https://knowledgebase.paloaltonetworks.com — search the product family + feature name.

By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30

⚡ At a glance

Vendor	Palo Alto Networks
Operating system	PAN-OS
Category	Hardware Failure
Skill level	Intermediate to advanced
DIY-able?	Yes with CLI access; some scenarios need Palo Alto TAC + RMA.

Treat this like a flight checklist. `show system info` and `show system environmentals` on PAN-OS returns the data you need for a Palo Alto Networks Palo Alto TAC case. if you have that saved before the box dies completely, your support call is 20 minutes shorter.

I have seen PA-220 units that looked dead at the LED panel but were actually fine, the front panel had failed, not the data plane. Always verify with CLI before declaring time of death.

What follows is the recovery playbook, not the marketing version. Some steps assume a spare unit or a console cable; if you do not have them, the diagnostic section is still useful for the Palo Alto TAC case.

What this guide covers

Diagnose and recover from POST failure on startup on a Palo Alto Networks PA-220.

Step-by-step

Note the exact POST failure code from the console.
Look up the code in the vendor hardware install guide.
Common: memory test fail (RMA RAM / motherboard), FPGA fail (RMA mainboard).
Open a Palo Alto TAC case with the POST log and the device serial.

CLI / commands

# Verify hardware state
show system info
show system state filter sys.s1.p*
show system environmentals

# Collect for Palo Alto TAC
tftp export tech-support to 10.10.1.100

When to RMA

Repeated failure after re-seat and power-cycle
Visible burn, scorching, or physical damage
POST or memory diagnostic failure
Hardware crashinfo without a software workaround

Frequently asked questions

Will this work on my specific PAN-OS version?

The procedure reflects current PAN-OS behaviour. Older releases may need minor syntax adjustments: use the CLI help (? or tab-completion) to verify.

Should I open a Palo Alto TAC case immediately?

Open one if you suspect hardware failure or the symptom persists after a maintenance-window reload. Make sure your support entitlement is active first.

Where can I find the Palo Alto Networks official documentation?

https://knowledgebase.paloaltonetworks.com, search the product family + feature name.

Is this procedure safe in production?

Test in a lab or maintenance window first. Capture pre-change state so you can roll back.

All Palo Alto Networks fix guides → /paloalto/
All vendor guides → /vendors/

Related guides worth a look while you sort this one out:

References

Palo Alto Networks support portal: https://support.paloaltonetworks.com
Palo Alto Networks knowledge base: https://knowledgebase.paloaltonetworks.com
Palo Alto Networks security advisories: https://security.paloaltonetworks.com
Open a case: https://support.paloaltonetworks.com/Support/Index

Reference material, not professional advice. Validate against your specific PAN-OS version and test in a non-production environment before applying.

Why this matters for your day-to-day

A Palo device that's misbehaving costs more than the fix itself: lost productivity, missed calls, security risk, even safety risk in some categories. Treating the symptom quickly with a documented procedure is cheaper than letting it persist. The steps above are written to get you back to working in under an hour where possible, and to flag clearly when escalation is the right call.

Safety + preconditions

Before any work on a Palo device:

Unplug from mains for any internal-access procedure.
Discharge stored energy (capacitors in PSUs, residual battery charge) per manufacturer guidance.
Use ESD-safe handling for boards and modules. no carpet, no wool sleeves.
Avoid moisture; never apply liquids near vents or connectors.
If you smell smoke, see scorch marks, or feel uneven heat, stop and escalate.

Verification checklist

After applying the fix on your Palo device, confirm:

The original symptom is no longer reproducible.
Related features (status LEDs, app sync, paired accessories) still work.
The device responds to a soft reboot without the fault returning.
Any error codes that were on display have cleared.
Documentation (your service log, the brand companion app) reflects the change.

When to call Palo support instead

Escalate if:

The same symptom returns within 24 hours of a clean fix.
You see physical damage (burn marks, swollen battery, cracked PCB).
The device is in warranty and a hardware replacement is the cheaper outcome.
Repair requires specialised tools you don't own (alignment jigs, calibration software).
Following the official path keeps the warranty intact, which matters more than the time spent.