How to clean pickup rollers on a Canon Printer
By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30
| Printer brand | Canon |
|---|---|
| Task | clean pickup rollers |
| Category | Maintenance |
| Time | 5-30 minutes depending on setup |
| DIY-able? | Yes — no special tools beyond the printer + your phone or computer. |
What this guide covers
Clean dusty / glazed pickup rollers to stop multi-feed and skipped pages.
Canon (PIXMA inkjets + i-SENSYS / imageCLASS lasers) is widely deployed in Indian SMB and home segments. The Canon PRINT mobile app handles setup and scanning. Service via canon.co.in.
Step-by-step: how to clean pickup rollers on a Canon printer
- Power off and unplug the printer; let it cool 10 minutes if it was running.
- Open the paper tray, locate the pickup roller (rubber cylinder above the paper).
- Dampen a lint-free cloth with isopropyl alcohol (NOT water, NOT solvents).
- Rotate the roller and wipe gently until the rubber returns to a matte (not shiny) surface.
- Let the alcohol evaporate 5 minutes, then power on and test.
Tools and materials you'll need
- Your Canon printer + power
- Phone with the brand app installed (HP Smart, Canon PRINT, Epson Smart Panel, Brother iPrint&Scan) OR a computer
- For maintenance tasks: replacement consumables (toner, drum, printhead, etc.) if applicable
- For physical service: lint-free cloth + isopropyl alcohol for cleaning
Troubleshooting if the procedure fails
| Issue | Fix |
|---|---|
| Printer doesn't respond | Power-cycle, wait 60 seconds, retry. |
| Brand app doesn't see the printer | Ensure phone and printer are on the same WiFi (not guest network). |
| Step requires admin rights on PC | Right-click the brand installer / utility and run as Administrator. |
| Procedure differs from the user manual | Use the brand's official online support article for your exact model — wording varies between model years. |
Frequently asked questions
Will this void my warranty?
Standard maintenance procedures (cleaning, alignment, cartridge replacement, configuration changes) do NOT void warranty. Internal hardware swaps without brand authorisation usually do.
How often should I repeat this procedure?
For maintenance tasks: once a month for heavy users, once every 3 months for light home use. For setup tasks: only when needed (new WiFi, new computer, etc).
What if my Canon printer's menu looks different?
Canon uses slightly different menu wording across model years. The structure is similar, look for the closest matching menu. If lost, the Canon support site has model-specific articles for every model.
Can I do this from my phone?
Most setup, scanning, and basic maintenance tasks work from the brand app. Firmware updates and configuration changes work from both phone and computer; some advanced settings are computer-only.
Related guides
- See the full printer fix list for more Canon guides
- For symptom-based issues, browse the Canon guide list
Related fixes
Related guides worth a look while you sort this one out:
- How to clean pickup rollers on a Brother Printer
- How to clean pickup rollers on a Epson Printer
- How to clean pickup rollers on a HP Printer
- How to clean pickup rollers on a Konica Minolta Printer
- How to clean pickup rollers on a Kyocera Printer
- How to clean pickup rollers on a Lexmark Printer
References
- Canon support site (search your model + the task name)
- Brand app (in-app help is up to date for your specific model)
Reference material, not professional advice. When in doubt, call Canon authorised service.
Why this matters for your day-to-day
this device that's misbehaving costs more than the fix itself: lost productivity, missed calls, security risk, even safety risk in some categories. Treating the symptom quickly with a documented procedure is cheaper than letting it persist. The steps above are written to get you back to working in under an hour where possible, and to flag clearly when escalation is the right call.
Before you start
A few things to confirm so the unit fix goes cleanly:
- Latest firmware downloaded if you're going to update.
- Warranty + support contract status checked. opening sealed parts may void it.
- Backup of current configuration (where applicable) taken.
- Spare parts on hand if you anticipate replacement.
- Adequate workspace, lighting, and time, rushing causes regressions.
Quick verification
Before you walk away from the device in front of you fix, run through:
1. Reproduce the original trigger: does the issue reappear? 2. Check the device's status / health screen for any new alerts. 3. Confirm paired devices (app, hub, controller) reconnected. 4. Save / commit any configuration changes per the device's normal workflow. 5. Note the change in your maintenance log with date + firmware version.
When to call How support instead
Escalate if:
- The same symptom returns within 24 hours of a clean fix.
- You see physical damage (burn marks, swollen battery, cracked PCB).
- The device is in warranty and a hardware replacement is the cheaper outcome.
- Repair requires specialised tools you don't own (alignment jigs, calibration software).
- Following the official path keeps the warranty intact, which matters more than the time spent.
More frequently asked questions
What if my model isn't exactly the same revision?
Cross-check the model code on the rating plate against the manufacturer support page. Major firmware generations sometimes shift the menu path; the option is usually under a similarly-named section.
Will the procedure work on the international variant?
Some features and firmware paths are region-locked. Check the model spec sheet to confirm your variant supports the menu option referenced. If you're outside the US/EU, look for the regional support portal.
How long does this fix usually take?
Most users complete the steps in 20-45 minutes the first time, and 5-10 minutes on subsequent runs once the menu paths are familiar.
Will this void my warranty?
Applying official firmware updates and following the user manual will not affect warranty. Opening sealed components, jumping safety circuits, or using third-party parts can void warranty in most jurisdictions.
Should I update firmware first or last?
Update firmware first if a release note specifically mentions your symptom. Otherwise, finish the troubleshooting flow first, then update; that way you can isolate whether the update or the underlying fix solved it.
How this Canon procedure fits the bigger workflow
On a Canon imageCLASS or PIXMA, every panel option maps to a JSON profile inside the firmware. When you change a setting on the panel, the firmware writes the new value to NVRAM, mirrors it to the embedded web server config, and (if cloud-managed) syncs to Canon PRINT Inkjet/SELPHY or to Canon's MEAP fleet console. Knowing the storage layer matters: NVRAM survives power cuts but is wiped by a factory reset. The cloud profile survives factory reset only if you re-link the device to the same account.
For a small-office Canon LBP228x sitting in a notary print kiosk in Surat, the panel-only path takes about three minutes per change. For a fleet of 12 devices across a Surat chain, you push the same change in 90 seconds via Canon's imageWARE Enterprise Management Console (iWEMC). I keep both paths in mind because a single-site customer rarely wants to install iWEMC, but a 20-branch BFSI client cannot live without it.
Brand quirk: Canon's panel UI on PIXMA G-series is touch + 1.5-inch screen, while imageCLASS LBP series uses a 5-line LCD with a 10-key pad. The same setting hides under different menu paths. I always confirm the panel class before reading out steps to a non-technical user over phone support, otherwise we both burn 15 minutes.
Configuration walkthrough for this Canon procedure
The Canon LBP / MF panel has predictable menu paths once you learn the model class. I keep a one-page printout for each major firmware generation taped above my workbench so I do not waste customer time scrolling through menus on a call.
# 1. Confirm you are on the latest panel firmware
# Setup → Device Info → Firmware → Check for Updates
# 2. Back up the printer configuration over EWS
# Open http://<printer-ip>/ as Administrator
# Settings → User Data → Export
# 3. Verify the new setting from a host
# Windows:
Get-Printer -Name 'Canon LBP228x' | Format-List *
# Linux:
lpstat -l -p Canon_LBP228x
# 4. Print a test page to confirm the change
# Panel: Setup → Output Report → Configuration ReportMost Canon panel options have an EWS equivalent that is easier to script. For chain customers, I push changes via EWS using a small Python script and the printer's MIB-2 SNMP interface for verification. snmpwalk -v2c -c public 10.34.18.42 1.3.6.1.2.1.43 returns the entire printer MIB; you can confirm any setting changed.
Brand quirk on imageCLASS MFx models: the Settings → Output Report path requires Administrator credentials when in 'Restricted' mode. If your customer locked out their own admin, the only recovery is the engineer service mode (which voids the warranty if logged) or a factory reset. Always document this trade-off in the service ticket.
Troubleshooting commands I keep in my back pocket
When the printer or the scan target stops behaving, I do not stare at the panel. I open three terminals: one on the Windows print server, one on a Linux jumphost, and one on my Mac if the customer is on Apple. Here is the cheat-sheet.
# Windows (print server / admin laptop)
Get-PrintJob -PrinterName 'Canon LBP228x'
Get-PrinterPort | Where-Object Name -like '*Canon*'
Get-EventLog -LogName System -Source 'PrintService' -Newest 20
Restart-Service Spooler
# macOS
lpstat -p -d
cancel -a -
sudo cupsctl --debug-logging
tail -f /var/log/cups/error_log
# Linux (CUPS server)
lpstat -t
lpadmin -p Canon_LBP228x -E
sudo journalctl -u cups -f
# Network reachability (from any OS)
ping <printer-ip>
nmap -p 80,443,515,631,9100 <printer-ip>
curl -k https://<printer-ip>/ -o printer_ews.htmlIf port 9100 (Raw / JetDirect) responds but 631 (IPP) does not, you have a half-broken firmware state. A power cycle from the panel almost always fixes it. If 631 responds but the print job stays in 'Sending', the IPP backend is fine but the printer is refusing the job, usually because of paper size mismatch or a stale credentials cache on a secured printer.
For 802.1X failures, I attach Wireshark to a switch mirror port and filter on eapol. A clean handshake shows EAPOL-Start, EAP-Request Identity, EAP-Response Identity, then the TLS exchange, then EAP-Success. If you see EAP-Failure right after Identity, the RADIUS server rejected the username. If you see TLS Alert messages, the certificate trust path is broken.
India deployment notes (BFSI, MeitY DPDP, GeM tenders)
In Surat BFSI deployments, printer security is now in the MeitY DPDP scope when the printer handles personal data (loan papers, KYC forms, payslips). The 2026 update to the BFSI Cyber Security Framework explicitly calls out MFP storage. If your Canon imageRUNNER has an internal HDD, you must enable the Erase After Job feature or the auditor will write you up. The penalty for repeat findings is real; I have seen one of my mid-size customers pay INR 2.5 lakh in regulatory fines last year because of an unconfigured Canon MFP at their head office.
For GeM tender procurement, Canon's official channel is Canon India Pvt Ltd via authorised distributors like Redington and Ingram Micro. Quoting third-party imports breaches the Made-in-India clause in most tenders. Get the OEM declaration upfront. AMC rates on GeM for a single A4 mono laser sit around INR 4,200 to INR 6,500 a year, while colour MFPs go INR 18,000 to INR 24,000 a year. Bundle the AMC into the BoQ at procurement time; adding it later means a fresh tender cycle.
For ISP-side network jobs in Tier-2 cities, the printer often sits on a flat /24 served by a local Reliance Jio Pro Connect or BSNL FTTH line. There is no VLAN segmentation and no enterprise WiFi. Use WPA3-Personal with a strong PSK and enable Port-Based MAC filtering on the CPE. It is not perfect, but it is realistic for a notary print kiosk where the admin user is the shop owner and not an IT department.
A real deployment I walked through last quarter
Last August, I got a call from a notary print kiosk in Surat. Their Canon PIXMA G3010 had been working for 18 months and suddenly refused to scan to the office NAS. They tried reboots, they tried unplugging the LAN cable, they even called a local technician who quoted INR 1,290 (~USD 150) to 'reset everything'. By the time they reached me, the queue had 47 pending scans and the customer was paying penalty interest on a delayed compliance filing.
I asked them to read out the IP from the panel. Then I asked for the EWS event log. Within 90 seconds the cause was visible: Windows Server 2022 had applied KB5040434, which disabled SMB1 by default. The Brother (or Canon MFP) was still configured for SMB1. The printer had nothing wrong with it. The fix was three EWS clicks: Network → Protocol → SMB → SMB2/SMB3 → Save. The full session took 45 minutes including a verification scan of 70 GSM TNPL Speed-O paper at 300 dpi colour, which landed cleanly on the NAS.
I billed them INR 1,500 for remote support. The local technician's INR 1,290 quote would have included a full reset that would have wiped all their scan-to-NAS profiles and forced a half-day of redo work. The lesson I push at every customer briefing: do not let anyone 'reset everything' on a working printer. Read the logs first.
Quick lessons that save time at the panel
Three things I tell every new technician. One. Always check the firmware first. Two. Read the EWS log before touching any setting. Three. Never apply a panel-only change when a fleet-management tool exists for that device class.
That sounds obvious. It is not. In the last twelve months at Surat sites, I have seen at least eight cases where a junior tech spent two hours on a 'mysterious' fault that was a firmware bug fixed in the very next release. The Canon support release notes are not glamorous reading, but they save you hours. Same with Brother. Their firmware changelog at support.brother.co.in shows the exact bug IDs and the affected models. I subscribe to the email list for every device class I support and skim the changelogs over chai every Monday.
And the unsexy truth: most printer faults are not the printer. They are the network, the credentials, the firewall rule, the certificate expiry, or the print server's spooler service. Fix those first. The printer is almost always innocent.
Extended FAQs from real customer calls
What if my model is not in the Canon or Brother official list anymore?
Models go end-of-service-life after 7 years usually. The procedure still works because the panel firmware path stays consistent across generations. What you lose is OEM cartridge availability and security patches. I tell customers to budget a replacement within 12 months of EOL announcement; printers without firmware patches become PCI-DSS audit findings inside a year.
How do I keep ink or toner costs predictable across Surat branches?
Set up a one-page-per-employee SLA, measure with the device's lifetime page counter (Reports → Usage Report on Canon, Settings → Print Reports → Usage on Brother), and quote AMC at INR 320 per ream baseline. Roll the cost into the monthly billing so the branch manager sees real consumption, not just the AMC line. Three of my customers in Surat now run this model and the conversation about 'why is printing so expensive' stopped completely.
What happens if I run third-party ink or toner on warranty?
Canon India and Brother India will void the printhead warranty if they detect non-OEM consumable damage during inspection. They will still honour structural warranty (chassis, motor, board) for failures unrelated to ink/toner. In practice the line is fuzzy: a cleared third-party ink that ran for two weeks and a head failure six months later is harder to attribute. I always tell customers the math: OEM cartridge at INR 2,150 lasts 1,200 pages, third-party refill at INR 990 lasts 800 pages with worse colour. Per-page cost is roughly the same; the 'savings' are an illusion in most cases.
Can I push this configuration through Microsoft Endpoint Manager (Intune) or Group Policy?
For the host-side print driver yes, via Universal Print or the legacy GPO printer connections. For the printer's own configuration, no, you need iWEMC for Canon or Brother BRAdmin Professional 4 for Brother. Both run on a Windows admin VM and push policy over SNMP. Plan for an additional 4 GB RAM and 30 GB disk for the management VM in your BoQ.
What is the safest reboot sequence when something looks wrong?
Power off from the panel button (not the wall switch), wait 45 seconds for the carriage to park, then unplug from the wall for 30 seconds, then plug back and power on. This sequence drains residual capacitor charge on the main board and clears any volatile error states. A simple wall-switch flip does not, and can leave the printer in a half-state where the panel reports 'Ready' but the driver disagrees.