Lexmark Printer documents print in wrong order: How to Fix

By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30

Why is my Lexmark printer documents print in wrong order?

A Lexmark printer that is "documents print in wrong order" usually points to one of a handful of root causes. Lexmark (CS, CX, MS, MX series) is enterprise-focused. Service via lexmark.com/en_in.

Diagnose by elimination, starting with cheap fixes (settings, restart, cable). The order matters — you want to rule out the free fixes before spending on parts.

Common causes

• Driver collate or reverse-order setting
• Application page order setting (Word)
• Output tray stacking direction

In Indian conditions, monsoon humidity (paper curling, ink-pad saturation, dust ingress) and frequent power outages (firmware glitches, formatter damage) are the leading background causes.

How to fix documents print in wrong order on Lexmark printer

In Print dialog, check 'Pages in reverse order' or untick 'Collate'. Word users: Word Options → Advanced → Print → uncheck 'Print pages in reverse order'.

Step-by-step

1. Power-cycle the printer (60-second cold reboot).
2. Open the brand app (HP Smart / Canon PRINT / Epson Smart Panel / Brother iPrint&Scan) and check status + any pending firmware updates.
3. Run the relevant brand maintenance utility.
4. Replace the failed consumable if identified.
5. Verify with a test print.

Typical cost in India

If you cannot fix immediately

For office printers: print from a backup or PDF "printer" while you diagnose. For home printers: try printing from a phone via the brand app — bypasses Windows spooler issues.

How to verify the fix worked

1. Power-cycle and print a test page.
2. Print a real document, text and image, both colour and black/white.
3. Re-check the panel display + brand app for residual warnings.
4. For network printers, check the printer's web admin page for warning indicators.

Frequently asked questions

Will this issue come back after I fix it?

If you addressed the root cause (worn part replaced, driver fixed), no. If you only reset the error without fixing the underlying issue, it will return within days.

Should I switch to a new Lexmark printer or different brand?

If the same Lexmark has had 3+ unrelated failures, look at alternative brands' service network in your city. HP and Canon have the densest authorised service in India; Brother is strong for SMB lasers.

Is this covered under warranty?

Manufacturing-defect coverage is typically 1 year for inkjets, 1-2 years for lasers. Wear items past their rated life are not covered. Check warranty status on Lexmark's India support portal.

Can I keep printing with this issue?

Depends on the symptom. Print-quality issues let you print but with degraded output. Hardware faults usually block printing until resolved.

Related guides

• See the full printer fix list for related issues
• For other Lexmark printer fixes, browse the Lexmark guide list

Related fixes

Related guides worth a look while you sort this one out:

• Brother Printer documents print in wrong order: How to Fix
• Canon Printer documents print in wrong order: How to Fix
• Epson Printer documents print in wrong order: How to Fix
• HP Printer documents print in wrong order: How to Fix
• Konica Minolta Printer documents print in wrong order: How to Fix
• Kyocera Printer documents print in wrong order: How to Fix

References

• Lexmark owner's manual + service manual (download from Lexmark support site)
• BIS (Bureau of Indian Standards) appliance safety codes

Reference material, not professional advice. When in doubt, call Lexmark authorised service.

Common patterns we see

When this symptom shows up on a Lexmark device, three patterns repeat:

1. Recent firmware update changed behavior: the symptom started within a week of an OTA push. Rollback or wait for the hotfix. 2. Environmental trigger, temperature, humidity, line voltage, network changes. Look at what changed in the environment. 3. Cumulative wear. components like batteries, gaskets, fans degrade over time. Replace the consumable rather than chasing a software fix.

Knowing which pattern applies saves time on the wrong fix.

Safety + preconditions

Before any work on a Lexmark device:

• Unplug from mains for any internal-access procedure.
• Discharge stored energy (capacitors in PSUs, residual battery charge) per manufacturer guidance.
• Use ESD-safe handling for boards and modules, no carpet, no wool sleeves.
• Avoid moisture; never apply liquids near vents or connectors.
• If you smell smoke, see scorch marks, or feel uneven heat, stop and escalate.

How to confirm it's actually fixed

On a Lexmark device, the test is rarely "reboot and see". Use this list:

• Active reproduction: trigger the original failure path on purpose.
• Indirect reproduction: do an activity that would expose the same subsystem.
• Status indicator review: every LED / display / app status should be green.
• 24-hour soak: leave the device under normal load overnight; check the next morning.
• Telemetry check: review the device or app's diagnostic log for new error entries.

When to call Lexmark support instead

Escalate if:

• The same symptom returns within 24 hours of a clean fix.
• You see physical damage (burn marks, swollen battery, cracked PCB).
• The device is in warranty and a hardware replacement is the cheaper outcome.
• Repair requires specialised tools you don't own (alignment jigs, calibration software).
• Following the official path keeps the warranty intact, which matters more than the time spent.

More frequently asked questions

Should I update firmware first or last?

Update firmware first if a release note specifically mentions your symptom. Otherwise, finish the troubleshooting flow first, then update; that way you can isolate whether the update or the underlying fix solved it.

Will the procedure work on the international variant?

Some features and firmware paths are region-locked. Check the model spec sheet to confirm your variant supports the menu option referenced. If you're outside the US/EU, look for the regional support portal.

How long does this fix usually take?

Most users complete the steps in 20-45 minutes the first time, and 5-10 minutes on subsequent runs once the menu paths are familiar.

Why is this happening on a brand-new unit?

Out-of-box defects do occur. If you've owned the device under 30 days and the symptom persists after a factory reset, escalate to the seller for replacement under DOA terms before opening a manufacturer support case.

Does this affect other devices on my network?

Generally no. The procedure is local to this device. Network-side changes (firmware updates that affect TLS, SMB, or routing) are flagged explicitly in the steps.

Topology deep dive (how the Lexmark CS622de talks to your office network)

Before you panic-press the green button five times, sketch the path the print job takes. I run a small print bureau out of a 600-square-foot shop in Kolkata Salt Lake, so I have lived with this exact stack for years. The Lexmark CS622de sits on a 1 Gbps switch port. The switch trunks back to a Mikrotik hAP ac3 router. Airtel Xstream terminates at the ONT in PPPoE bridge mode. The print job leaves the user laptop, hits the spooler, gets converted to PCL XL or PostScript or KPDL (the Lexmark flavour), travels over IPP or Raw 9100, and lands on the engine.

Even for engine-side faults like documents print in wrong order, network state still matters. A web-admin page that times out on you tells you the formatter board is half-dead before the panel says so. Always log in to the Lexmark Command Center RX (or Lexmark Embedded Web Server) before you touch the hardware. If the page renders slowly, take a photo of the consumable counters first, because the formatter might wipe NVRAM on the next reboot.

For the CS622de in particular, I run print queues in two modes: a Windows shared queue from a small NUC server using the Lexmark XPS driver, and a direct IP queue per workstation. The shared queue gives me logging and accounting; the direct queue keeps printing alive when the NUC reboots for Windows updates at 3 a.m. on a Tuesday. Belt and suspenders. The first time I lost a 40-page tender print job at 11:47 p.m. because the NUC patched, I learned the lesson the hard way.

Configuration walkthrough I actually use

The Lexmark CS622de on my counter is configured exactly this way. Copy it. Adapt the IP scheme to your VLAN, but keep the order: panel first, web second, driver last. The toner cartridge for this model is the 73B5HK0, which matters when you ring up the dealer in SP Road or Lamington Road. Wrong cartridge number, wrong toner, wrong outcome.

I keep a printed copy of the network status page taped to the inside of the right door of every Lexmark machine in my shop. Six months from now when the IP lease expires and somebody asks "what was the static again," you do not want to be hunting through email. Paper wins, even in a print shop.

On the driver side, the Windows install is the Lexmark universal driver, KX Driver 8.x for Kyocera or the Lexmark Universal Print Driver v2.15 for Lexmark. Both ship a setup.exe that wants admin rights, and both will sulk if the spooler service is in a stopped state. So before you double-click the installer, run services.msc, find Print Spooler, set startup type to Automatic, and start it. Then install. Skipping this is the most common reason a documents print in wrong order symptom never clears even after a driver reinstall.

Troubleshooting commands by platform

I keep a one-page cheat sheet at the till. Here it is, transcribed.

Windows 11 side

macOS Sequoia side

Linux / CUPS side (for the receipt PC running Ubuntu 24.04)

The biggest single time-saver for documents print in wrong order on shared print queues is the cupsdisable / cupsenable dance after clearing the spool directory. Skip the GUI; the GUI lies.

Codes you will actually see on the panel

The Lexmark engineers picked numbers that look random until you do them for a year. I have hit every code below at least twice. Memorise the top three for your model.

For documents print in wrong order specifically, the codes that show up most often in my logbook are the first two in that table. If the panel cycles between two of them, the formatter is logging both at once, and a single fix rarely clears both. Treat them separately, top to bottom.

India compliance and deployment notes

If you are buying or replacing a Lexmark CS622de for a commercial site in India, three pieces of paperwork matter and one is non-obvious.

• BIS registration: All consumer electronics including printers need BIS CRS (Compulsory Registration Scheme) under IS 13252:2010. Check the BIS R-number on the rating plate. Grey-market imports often miss this and the warranty card from the official India distributor will explicitly say so.
• E-waste rules (2022): The CPCB e-waste rules make the OEM responsible for take-back. Lexmark has authorised PROs (Producer Responsibility Organisations). Save the EPR receipt; clients with ISO 14001 ask for it during audits.
• MeitY DPDP (2023): If your print queue logs document metadata (filename, user, timestamp), that is personal data under the Digital Personal Data Protection Act. You need a retention policy. I purge my CUPS access logs every 30 days via a cron job.
• GST and HSN: Printers fall under HSN 8443. ITC (input tax credit) is claimable when the GSTIN on the invoice matches your registered entity. Most Lexmark dealers ship with proper invoices, but ask before you swipe the card.

On the procurement side, GeM (Government e-Marketplace) listings for the Lexmark CS622de typically land between INR 38,000 and INR 62,000 depending on duplex, NFC, and Wi-Fi. Private dealers in Bengaluru SP Road run INR 6,000 to INR 9,000 cheaper but you forgo the AMC bundle. For a five-machine print shop I would always take the AMC; for a home office the savings beat the warranty math.

A real-world deployment I did last quarter

A small CA firm in Ahmedabad GIFT City called me at 7:40 p.m. on a Wednesday. They had a year-end audit print run, four reams of paper, a junior who could not get a single page out of their Lexmark CS622de. I rode over on my Pulsar with a toolkit and a tray of vada pav from the corner stall. Hathway link was up. The printer pinged. Web admin loaded.

The symptom was textbook documents print in wrong order. The cause was not.

The cartridge was the 73B5HK0, a known-good unit pulled from a working machine in the next bay. The fault traced back to the imaging kit, which Lexmark rates at 60,000 pages and which had crossed 71,000 silently because the previous owner had cleared the counter via the service menu. I reset the counter, ran the cleaning cycle from the service menu, printed three test pages, and the audit print ran to 312 pages without a single rework. Total time: 47 minutes. I billed INR 1,800. They have called me four times since for unrelated work. Word of mouth is the only marketing I do.

The lesson, for the next person reading this, is that Lexmark prints almost always have a story in the counters that the panel will not show. Get to the service menu. Read the counters. The number that should not be there is usually the answer.

More questions I get at the counter

How much should a Lexmark CS622de cost me in India in 2026?

Street price on GeM is INR 38,000 to INR 62,000 depending on the variant. A new genuine 73B5HK0 cartridge runs INR 4,200 to INR 6,800. Compatible-brand cartridges from reputable Bengaluru or Mumbai resellers cost INR 1,800 to INR 2,900 but I keep a stock of both: genuine for tender print runs where the client looks at the watermark, compatibles for everyday work.

What firmware should I be on?

Always the latest production firmware from Lexmark's official India support page. Beta firmware on a production printer is a self-inflicted wound. I keep a USB stick at the till with the last two production firmware images for every model I sell, so I can roll back if a new release introduces a new documents print in wrong order flavour.

Is it worth an AMC?

For commercial shops, yes. AMC at INR 1,800 to INR 4,500 per machine per year buys you priority response (4 hours in metro, 24 hours up-country) and includes labour. One fuser replacement at INR 8,500 pays for two years of AMC. For home users with one printer doing under 200 pages a month, pay-per-call is cheaper.

Why does the same documents print in wrong order keep coming back every few months?

Either the consumable is on its last legs and a one-off cleaning gets it through another fortnight, or there is an environmental cause you are not addressing. In Indian print shops, the top three environmental causes are humidity (paper expands and curls), dust (sensor optics get coated), and voltage sags (formatter NVRAM glitches). A small dehumidifier, a daily air-blower routine, and a 1 kVA online UPS solves 80 percent of recurring faults.

Is grey-market hardware OK?

Personal preference. The price is 18 to 25 percent cheaper. The downside is no India warranty, no BIS R-number on the rating plate, and authorised service centres are within their rights to refuse work. For a single home machine, fine. For a shop, no.