HowToFixMe
Connectivity (non-WiFi)

Xerox Printer mopria not working android: How to Fix

By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30

⚡ At a glance
Printer brandXerox
Symptommopria not working android
CategoryConnectivity (non-WiFi)
DIY-able?Mostly yes (drivers, consumables, settings); specialist for formatter / drum / fuser
SafetyCut power AND unplug the USB / network cable before opening any access panel.

Why is my Xerox printer mopria not working android?

A Xerox printer that is "mopria not working android" usually points to one of a handful of root causes. Xerox (Phaser, WorkCentre, VersaLink) is dominant in enterprise India. Service contracts usually bundled with managed-print agreements.

Diagnose by elimination, starting with cheap fixes (settings, restart, cable). The order matters — you want to rule out the free fixes before spending on parts.

Common causes

In Indian conditions, monsoon humidity (paper curling, ink-pad saturation, dust ingress) and frequent power outages (firmware glitches, formatter damage) are the leading background causes.

How to fix mopria not working android on Xerox printer

Install 'Mopria Print Service' from Play Store, ensure phone and printer are on the same WiFi, and enable Mopria in the printer's network settings.

Step-by-step

1. Power-cycle the printer (60-second cold reboot).
2. Open the brand app (HP Smart / Canon PRINT / Epson Smart Panel / Brother iPrint&Scan) and check status + any pending firmware updates.
3. Run the relevant brand maintenance utility.
4. Replace the failed consumable if identified.
5. Verify with a test print.

Typical cost in India

ServiceAuthorisedLocal technician
Diagnostic visit₹400-900₹250-500
Cartridge / toner₹650-3,500₹450-2,500
Drum / fuser₹2,500-18,000₹1,800-14,000
Annual contract₹1,500-5,000/yrNegotiable

If you cannot fix immediately

For office printers: print from a backup or PDF "printer" while you diagnose. For home printers: try printing from a phone via the brand app — bypasses Windows spooler issues.

How to verify the fix worked

  1. Power-cycle and print a test page.
  2. Print a real document, text and image, both colour and black/white.
  3. Re-check the panel display + brand app for residual warnings.
  4. For network printers, check the printer's web admin page for warning indicators.

Frequently asked questions

Will this issue come back after I fix it?

If you addressed the root cause (worn part replaced, driver fixed), no. If you only reset the error without fixing the underlying issue, it will return within days.

Should I switch to a new Xerox printer or different brand?

If the same Xerox has had 3+ unrelated failures, look at alternative brands' service network in your city. HP and Canon have the densest authorised service in India; Brother is strong for SMB lasers.

Is this covered under warranty?

Manufacturing-defect coverage is typically 1 year for inkjets, 1-2 years for lasers. Wear items past their rated life are not covered. Check warranty status on Xerox's India support portal.

Can I keep printing with this issue?

Depends on the symptom. Print-quality issues let you print but with degraded output. Hardware faults usually block printing until resolved.

Related guides worth a look while you sort this one out:

References

Reference material, not professional advice. When in doubt, call Xerox authorised service.

Why this matters for your day-to-day

A Xerox device that's misbehaving costs more than the fix itself: lost productivity, missed calls, security risk, even safety risk in some categories. Treating the symptom quickly with a documented procedure is cheaper than letting it persist. The steps above are written to get you back to working in under an hour where possible, and to flag clearly when escalation is the right call.

Safety + preconditions

Before any work on a Xerox device:

Verification checklist

After applying the fix on your Xerox device, confirm:

Escalation guide

For a Xerox device, the right escalation depends on impact:

More frequently asked questions

Should I update firmware first or last?

Update firmware first if a release note specifically mentions your symptom. Otherwise, finish the troubleshooting flow first, then update; that way you can isolate whether the update or the underlying fix solved it.

Is it safe to apply during business hours?

If the device is in production use, apply during a scheduled maintenance window. Most procedures need 2-15 minutes of downtime. Capture pre-change state so you can roll back if needed.

How often should I run preventive checks?

Quarterly for most consumer devices; monthly for production / commercial devices. Set a calendar reminder so the device stays healthy between issues.

Why is this happening on a brand-new unit?

Out-of-box defects do occur. If you've owned the device under 30 days and the symptom persists after a factory reset, escalate to the seller for replacement under DOA terms before opening a manufacturer support case.

Does this affect other devices on my network?

Generally no. The procedure is local to this device. Network-side changes (firmware updates that affect TLS, SMB, or routing) are flagged explicitly in the steps.

Xerox topology deep dive for mopria not working android

Xerox enterprise printers in Indian print shops normally sit behind a small managed switch, a CentreWare-managed IP block, and a Windows print server running the Xerox GPD (Global Print Driver). I run a Bengaluru shop and most of my walk-ins are VersaLink, WorkCentre, and the older Phaser fleet. The VersaLink B400 is the workhorse, that one model alone is two-thirds of the mopria not working android tickets I get monthly. The mix is roughly 50 percent VersaLink, 30 percent WorkCentre MFD, and 20 percent legacy Phaser holdouts that customers refuse to retire.

Xerox has its own quirks that bite first-time service techs. The dual-language code system (016-981 is the topic-specific fault, but the panel often flashes a chained code like 003-947 first that is just a generic service request) confuses newcomers. The toner cartridge has a fuser-fingerprint check, so if you swap from a unit that ran high-coverage colour work, the new cartridge can throw 093-924 for the first 50 pages while it learns the engine. And SMB scanning on VersaLink hates SMBv1, which got disabled across every Windows 11 23H2 box last year. you have to enable SMBv2 with NTLMv2 auth on the printer side via CWIS → Apps → Scan to Network.

The panel code most often correlated with mopria not working android on the VersaLink B400 in my workshop log is 016-981. Note that the panel sometimes shows a chained generic code first, and you have to drill into the panel's fault history menu to see the actual subsystem code. On VersaLink it is under Device → Information Pages → Print → Fault History. On Phaser it is under System Setup → Information → Information Pages → Fault Messages.

Configuration walkthrough (web admin)

Open the Xerox CentreWare Internet Services (CWIS) page by typing the printer IP into a browser. Type http://192.0.2.50/ for example. The Properties tab needs an admin login. Default on most VersaLink and WorkCentre is admin / 1111. Change that immediately, leaving the default open is a DPDP audit fail. From CWIS you can pull the configuration page, the audit log (under Properties → Login/Permissions/Accounting → Audit Log), and the consumables status.

Once you are in the web admin, the workflow for diagnosing mopria not working android is the same every time. Pull the configuration report first. Compare the firmware level against the latest released build on the vendor support portal. Check the consumables percentage. Pull the audit log. Cross-reference against the print server's spooler events. If a CWIS or EWS setting needs to change, change it once, save, reboot the printer (full power cycle, not warm restart), and re-test against a known-good document. Never change two settings in one pass: you will not know which one resolved the symptom.

Troubleshooting commands by platform

From the print server, the standard Xerox checks are:

Get-Printer -Name 'Xerox-WC-01' | Format-List Name,DriverName,PortName,PrinterStatus
Get-PrinterDriver | Where-Object Name -like 'Xerox*'
Get-PrintConfiguration -PrinterName 'Xerox-WC-01'
Get-WmiObject -Class Win32_Printer | Where-Object Name -like 'Xerox*' | Select-Object Name,WorkOffline,PrinterStatus
Restart-Service -Name spooler -Force

From macOS, drop into the terminal:

lpstat -p Xerox_VersaLink_B400
lpoptions -p Xerox_VersaLink_B400 -l
cancel -a Xerox_VersaLink_B400
cupsctl --debug-logging
tail -f /var/log/cups/error_log

If you have SNMP enabled on the printer (CWIS → Connectivity → SNMP), you can pull status without opening the GUI:

snmpwalk -v2c -c public 192.0.2.50 1.3.6.1.2.1.43.16.5.1.2
snmpget  -v2c -c public 192.0.2.50 1.3.6.1.2.1.25.3.5.1.1.1
snmpwalk -v2c -c public 192.0.2.50 1.3.6.1.2.1.43.11.1.1.9

Two notes from field experience. First, SNMPv1 / v2c with the default public community is open by default on most Xerox and older HP units. For BFSI and any production environment, switch to SNMPv3 with authentication, and restrict polling to the management VLAN. Second, the macOS CUPS log is the fastest source of truth when a Mac user complains that the printer is doing something weird, printer is fine, driver is fine, but the document type or PDF version triggers a CUPS filter fault. Look for filter failed lines in /var/log/cups/error_log.

India compliance and deployment notes

For BFSI and CA-firm customers, the printer fleet has to satisfy India's DPDP Act 2023 audit requirements: pull-print via the Xerox Workplace Suite or via Equitrac, encrypted spool storage on the internal HDD/SSD, and audit logging tied to LDAP or Microsoft Entra ID. Xerox's ConnectKey platform covers all three. Pricing on the VersaLink B405 sits at INR 62,000-78,000 on GeM tender, VersaLink C7020 at INR 1.85L-2.4L, and the WorkCentre 6605 at INR 38,000-48,000 for SMB. AMC quotes from the Xerox channel partner network in metros run INR 9,500-26,000 per year per device, including two on-site visits and consumable health checks. For BFSI we additionally enable IPsec under CWIS → Connectivity → Setup → Security → IPsec and lock the management VLAN to the SOC subnet only.

The other compliance angle worth noting is the BIS (Bureau of Indian Standards) energy star certification. Most VersaLink and HP M-series units shipped after 2024 carry the BIS star rating and qualify for the BEE rebate scheme that some state government tenders (Maharashtra, Karnataka, Tamil Nadu) apply when buying replacement office equipment. If you are billing a state government department under a GeM tender, attach the BIS certificate copy to the BoQ submission. it is a hard line item, not a formality.

Real-world deployment I did

The most painful mopria not working android ticket I worked this year landed in February 2026 at a CA firm in Saket, Delhi. They had a VersaLink B400 that had been throwing 016-981 on and off for three weeks. The dealer's L1 engineer had already swapped the toner cartridge twice and updated firmware to the latest build under the AMC. Did not help. I went in expecting a formatter board fault. Total visit cost quoted: INR 0 plus parts. I pulled the configuration sheet first via CWIS, noticed the page count was at 184,322, well past the rated 100k for the transfer belt. I checked the transfer belt status via snmpwalk -v2c -c public 192.0.2.50 1.3.6.1.2.1.43.11.1.1.9 and got back a count showing 4 percent remaining. That was the actual problem. Replaced the transfer belt (genuine Xerox unit, GeM tender rate INR 8,400). Issue cleared. Total time on site: 90 minutes. Customer signed off on the AMC renewal the same day. Lesson: the panel code is only the symptom, the page count and consumable percentage are the real diagnosis.

A second case from late 2025 is worth a mention. A 12-seat advocate's office in Mylapore, Chennai, asked me to fix a recurring mopria not working android problem on their single shared VersaLink B400. The unit was running ConnectKey 1.24, the office Wi-Fi was Jio Airfiber with the default 192.168.29.x/24 subnet, and the print server was a Windows 11 Home machine. Two strikes against best practice already. I moved the printer to a small managed switch, gave it a static IP outside the DHCP pool, updated firmware to 1.28 (not 1.30, because the office had two legacy mopria not working android workflows that 1.30 breaks), and locked CWIS admin behind a strong password. The recurring fault stopped. Total time on site: 4 hours. Total bill: INR 4,800 including the managed switch (TP-Link TL-SG108E, INR 1,650 from Reliance Digital). The office still calls every six months for a preventive visit at INR 1,200: the cheapest insurance they buy all year.

Extended FAQ for mopria not working android

Does this mopria not working android happen more on VersaLink or WorkCentre?

VersaLink units (single-function and small MFD) hit this slightly more often than WorkCentre because the firmware stack on VersaLink is the newer ConnectKey release, which got a major rewrite in 2024. The legacy WorkCentre 3xxx and 4xxx lines still run an older but more stable firmware tree. Phaser units (now officially end-of-life but still common in field) sit somewhere in between.

If I use a remanufactured Xerox cartridge from a Bengaluru refiller, will it trigger mopria not working android again?

It can. Xerox's smart-card cartridge chip reads the engine fingerprint on first install. A refilled cartridge with a reset chip passes the first check but can throw 016-981 after 50-200 pages once the engine notices a coverage mismatch. For BFSI we mandate genuine Xerox stock on the AMC. For non-regulated customers, the savings (refilled INR 2,200-3,800 vs genuine INR 5,800-9,200) make the occasional re-flash worth it.

What changed in the 2026 ConnectKey firmware that affects mopria not working android?

ConnectKey 1.30 (rolled out January 2026) added tighter cartridge-engine validation and disabled SMBv1 by default. Most mopria not working android regressions I have seen this year trace back to one of these two changes. Roll back to 1.27 via CWIS → System → Firmware Upgrade only if Xerox dealer support clears the rollback in writing, otherwise warranty gets voided.

How fast can I get a part for a VersaLink B400 in a Tier-2 town?

If you are in Bengaluru, Mumbai, Chennai, Hyderabad, Pune, or Delhi-NCR, same-day or next-day stock is realistic. Outside metros (Coimbatore, Visakhapatnam, Indore, Bhopal, Lucknow, Patna), expect 3-5 working days via the channel partner courier. The Xerox dealer network is denser than people think. there is at least one authorised partner in every state capital. The friction is usually documentation: keep the printer serial number, AMC number, and the GST invoice copy ready before you call.

Should I bother with the AMC or pay per-incident?

For a single home or SOHO unit, per-incident is cheaper. Typical service-call rate in Bengaluru is INR 600-900 for the visit plus parts at cost. Per-year AMC quotes for a single VersaLink B400 run INR 7,500-12,000 depending on coverage. The break-even is roughly 8-10 service calls per year, meaning AMC only pays back if the printer is genuinely flaky. For an office with 3+ units, AMC almost always wins because the dealer combines preventive maintenance with break-fix, and you stop losing half-days to print outages.

Key takeaways

The Xerox and HP enterprise printer ecosystem in India is mature but quirky. Most mopria not working android tickets I close are not actually a hardware problem: they are a firmware mismatch, an SMB / SNMP setting that someone tightened, a refilled consumable, or a print server that needs its spooler restarted. The drill is always the same: pull the configuration page first, read the actual code (not the chained generic code on the panel), check the consumable percentages, and only escalate to parts replacement when the diagnostic data backs it.

  1. Print the CWIS configuration report and note the firmware level + page count.
  2. Check the audit log under Properties → Login/Permissions/Accounting → Audit Log for the exact timestamp of the first occurrence.
  3. Run the appropriate diagnostic from the panel: Tools → Troubleshooting → Print Quality or the chained code 016-981 reset.
  4. Pull SNMP consumable health: snmpwalk -v2c -c public 192.0.2.50 1.3.6.1.2.1.43.11.1.1.9.
  5. If symptom returns within 48 hours, escalate to the Xerox channel partner under AMC, keep the serial number, firmware level, page count, and CWIS audit log export ready.

If you keep one note from this guide, keep this one. The vendor panel code is the symptom, not the diagnosis. The diagnosis lives in the audit log, the configuration report, and the consumable health page. Once you build the habit of reading those three first, the actual repair work shrinks to under 30 minutes for nine out of ten mopria not working android tickets.